• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.12
• /
• pp.173-179
• /
• 1995

This paper descrived housing design in conception of dynamic characteristics. The vibration and noise in power train system of automobile are important on the environment matter. The vibration caused by meshing teeth of gear is transmitted to the gear box faces through shafts and bearings. Shape of housing is used different radius of curvature(R=0 to 80 mm). The velocity responese, sound power and radiation efficency on the surface of gear box are calculated. The sound power and radiation efficency are compared with different radius of curvature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05b
• /
• pp.54-57
• /
• 2003

This study proposes that the Phase Linearization Interpolation is higher efficency than the existed Orthogonal Frequency Division Multiplexing system in the Multipath channels time-varient. Also, it showed that time domain equalization is better than the existed frequency domain equalization about the calculation and efficency for clear Inter Carrier Interference of the doppler effect.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1725-1728
• /
• 2006

Flat fluorescent lamp(FFL) is used as a light source for LCD TV backlight and is composed of many discharge channels but each channel may not be turned on simultatneouly especially at cold temperature. The simultaneous start of each lamp channels of FFL was accomplished by driving FFL with specially designed voltage and currnet waveforms without sacrificing the inverter efficency.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.53 no.1
• /
• pp.1-6
• /
• 2004

In this paper, we present the new method for joint aspect inspecting system. We use the image processing and laser maker for light source. We can find the matrial joint status through processing the line pattern which is made by laser maker. To get the line pattern, in first, we did the preprocess of threshold. If the shape of line had over two segments, then the joint status is abnormal. We show our system efficency by experiment on tire facility.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.04a
• /
• pp.915-917
• /
• 2010

정보 활용이 유연한 현대 소비자들의 알 권리 충족을 위해 현존하는 모든 사물에 제공되어야 하는 정보가 늘어나고 있음에 따라 사물들의 객체의 속성도 또한 증가하고 있다. 다중속성 기반 객체를 관리하는 시스템에 있어 효율적인 객체관리를 위한 방법을 연구하고 그 방안으로 객체를 재구성하여 분배하는 디스패처(Dispatcher)를 제시한다. 또한 의존성에 관련한 향후 연구 방향을 제시한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.9C
• /
• pp.853-860
• /
• 2002

In this paper, we proposed a new buffer management and cell scheduling scheme for GFR service in ATM networks. The proposed scheme is able to satisfy fairness criteria and efficient cell service in GFR. Performance analysis through the simulation presents that the proposed scheme can meet fairness 2(MCR plus equal share), which are not met by conventional scheduling mechanisms such as WRR. Also, the proposed scheme is superior to WRR about 29% in throughput and more efficency in fairness criteria.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.39.1-39.1
• /
• 2010

이종접합태양전지는 단결정 실리콘 기판 표면에 고품질 비정질 실리콘층을 적층함으로써 전기의 근원인 전하의 재결합 손실을 줄여 높은 개방전압을 얻을 수 있다는 특징이 있다. 초박형 태양전지는 기존 태양전지보다 뛰어난 광전변환 특성(Photovoltaic characteristic)을 가지고 두께가 얇아 제품 형상 시 자유도가 높아진다. 본 논문에서는 n-type Bare wafer($160{\sim}180{\mu}m$)를 이용하여 $50{\mu}m$의 웨이퍼를 제작하였다. a-Si:H(p)_a-Si:H(i)_c-Si(n)의 광흡수층 구조를 성막하여 cell을 제작하였다. 그 결과 Voc(Open Circuit Voltage)가 0.666, Jsc(Short-Circuit Current)가 34.77, FF(Fill Factor) 69.413, Efficency 16.07%를 달성했다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.9
• /
• pp.80-85
• /
• 2011

In this paper, complex discharge type ozonizer with a screw type electrode has been designed and manufactured for environmental improvement using low power and high efficency ozoniazer. The complex discharge type ozonizer is equipped with three electrodes{central electrode(CE), internal electrode(IE) and external electrode(EE)}. Ozone of the complex discharge type ozonizer is generated by superposition of silent discharge and surface discharge in discharge space as a screw type CE and IE are respectively applied to AC high voltage of inverse-polarity has $180[^{\circ}]$ phase difference, EE is common electrode. In this time, when oxygen has been used as supplied gas, the maximum values of ozone concentration, ozone generation and ozone yield were obtained as 8,334[ppm], 3,249[mg/h] and 65.3[g/kwh].

• Korean Journal of Microbiology
• /
• v.29 no.5
• /
• pp.270-277
• /
• 1991

A mutational alteration in the signal sequence of ribose-binding protein (RBP) of Escherichia coli, rbsB103, completely blocks the export of the protein to the periplasm. Intragenic suppressors for this mutation have been selected on minimal medium with ribose as a sole carbon source. Six suppressor mutations were characterized in detail and were found to have single amino acid wubstitution in the mature portion of RBP, which resulted in the mobility shift of the proteins on SDS polyacrylamide gel. Amino acid changes of these suppressors were localized in several peptides which are packed to form the N terminal domain of typical bilobate conformation of RBP. The involvement of SecB, a molecular chaperone, was investigated in the suppression of signal sequence mutation. Translocation efficency was found to be increased by the presence of SecB for all suppressors. It is likely that the folding characteristics of RBP altered by the suppressor mutations affect the affinity of interaction between SecB and RBP.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.2237_2238
• /
• 2009

This paper describes the design process of three-phase squirrel cage induction moter. stator and rotor were modelled with the result obtained from loading distribution on the provided specification. For proving validity of the result obtained from loading distribution, through Maxwell simulator the first test target values, output and efficency, synchronous speed and etc, were compared with the design result.