• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1942-1944
• /
• 2000

On-line diagnosis system has been developed and is now applied the detection of shorted-turn in the field winding of large generator. This system consists of data aquisition system and display PC. The data aquisition system detects voltage waveform from flux probe sensor installed in the stator slot. The display PC shows the shorted-turn situation of generator rotor winding.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.235-238
• /
• 2009

To study the relationship between spark ignition and the gap in the nano-scale region, the electric potential was applied to between a Pt-Ir tip and a gold substrate. The tip was sharpened by electro-chemical etching process in the solution of $CaCl_2;H_2O$ and acetone. The radius of tip was measured to be around 200nm and attached to the scanning probe microscope to control the gap between the tip and the substrate. The electric potential of 10V to 80V was applied to initialize the spark. The gaps and the current profile were measured to analyze the characteristics of spark ignition. A spark sustaining time was measured to be between 50ns and 200ns depending on the applied electric potential and the gap between the electrodes. The continuous electric discharge was successfully sustained up to 1 second of spark or arc time. The developed process can be applicable to the micro-scale fabrication of automotive sensors as a similar concept of GTAW.

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.02a
• /
• pp.313-314
• /
• 2009

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.169-170
• /
• 2007

• Nuclear Engineering and Technology
• /
• v.53 no.9
• /
• pp.2982-2989
• /
• 2021

One of the consequences of the 475 ℃ embrittlement of duplex stainless steels is the reduction of the resistance to localized corrosion. Therefore, the detection of this type of embrittlement before the material exhibits significant loss in toughness, and corrosion resistance is important to ensure the structural integrity of critical components under corrosion threats. In this research, conductivity measurements are performed using the alternating current potential drop (ACPD) technique with using a portable four-point probe as a nondestructive evaluation (NDE) method for detecting the embrittlement in a 2507 (UNS S32750) super duplex stainless steel (SDSS) aged at 475 ℃ from as-received condition to 300 h. The electric conductivity results were compared against two electrochemical tests namely double loop electrochemical potentiokinetic reactivation (DL-EPR) and critical pitting temperature (CPT). Mechanical tests and the microstructure characterized using scanning electron microscopy (SEM) imaging are conducted to track the progress of embrittlement. It is shown that the electric conductivity correlates with the changes in impact energy, microhardness, and CPT corrosion tests result demonstrating the feasibility of the four-point probe as a possible field-deployable method for evaluating the 475 ℃ embrittlement of 2507 SDSS.

• Journal of the Optical Society of Korea
• /
• v.16 no.1
• /
• pp.47-52
• /
• 2012

The use of a $Ti:LiNbO_3$ symmetric Mach-Zehnder interferometric intensity modulator with a push-pull lumped electrode and a plate-type probe antenna to measure an electric field strength is described. The modulator has a small device size of $46{\times}7{\times}1mm$ and operates at a wavelength of $1.3{\mu}m$. The output characteristic of the interferometer shows the modulation depth of 100% and 75%, and $V_{\pi}$ voltage of 6.6 V, and 6.6 V at the 200 Hz and 1 KHz, respectively. The minimum detectable electric field is ~1.84 V/m, ~3.28 V/m, and ~11.6 V/m, corresponding to a dynamic range of about ~22 dB, ~17 dB, and ~6 dB at frequencies of 500 KHz, 1 MHz and 5 MHz, respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.185-186
• /
• 2000

For the quantitative investigation of the erosion of MgO layers in real ac-PDP cells, we constructed a microscopic spectrophotometer which is capable of measuring transmission spectra from the area as small as 20 ${\times}$ 20 ${\mu}m^2$. In the test on the sputtered MgO films with a thickness gradient, we were able to probe the thickness variation of 1000 nm over $1000-{\mu}m$ distance. Using this instrument, we were able to determine not only the erosion rate at the particular position of ac-PDP cells but also the relative erosion rate at different positions in a single ac-PDP cell.

• The Korean Journal of Mycology
• /
• v.26 no.2 s.85
• /
• pp.135-143
• /
• 1998

Contour-clamped homogeneous electric field gel electrophoresis was used to establish electrophoretic karyotype for 10 species of Fusarium sections Sporotrichiella, Liseola, Gibbosum, Discolor and Martiella. Intact chromosomal DNA was isolated from fungal protoplast and separated under various conditions according to their size in order to improve DNA separation. The numbers of chromosome-sized DNA molecules for individual species ranged from 5-13, with individual chromosomes ranging from 0.78 Mb to 7.20 Mb in size. The total genome DNA size of each species was estimated at about 18.32 Mb to 48.20 Mb. Comparison of karyotype profiles following Southern hybridization analysis with a randomly selected genomic probe of F. oxysporum formae speciales litii was carried out.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1998.05a
• /
• pp.95-95
• /
• 1998

현장에서 부식속도를 측정하는 방법의 하나인 전기저항 프로브(Electric Resistance Probe, ER probe)는 시편이 부식되는 양에 비례하여 저항이 증가하는 원리를 이용한 것으로 부식기구에 무관하게 직접적인 부식속도의 측정이 가능하다. 그러나, 와이어나 판형으로 기계 가공된 프로브로 제작되어 미량의 부식에는 저항변화폭이 작아 긴 측 정시간이 필요하고, 특히 국부 부식의 경우 부식이 상당히 진행되더라도 전체 저항변 화가 크지 않은 문제점이 있다. 박막형 전기저항프로브는 미량의 부식에서도 저항변화폭이 크게 나타나도록하기 위 하여 금속 박막을 스퍼터링으로 증착하여 동일 부식량에서 저항 변화율을 크게 향상 시킨 프로브이다. 이 프로브는 좁은 선폭(O.25-1mm)의 세선을 복수개 포함한 형상으로 프로브를 설계하여 핏팅이 발생하면 하나의 세선이 끊어지도록 하여 국부적인 부식이 일어날 경우에도 저항변화가 크게 나타나도록 고안되었다. 탄소강의 경우 일반적인 환경에서는 부식속도가 결정립의 크기, 가공경화의 정도등 에 민감하게 변화되지 않는 것으로 알려져 있으나, 박막으로 증착되었을 경우에는 별 크재료와는 전혀 다른 미세구조를 가지므로 벌크의 부식거동과는 다른 거동을 보일 수 있다. 이 연구에서는 증착조건을 달리하여 증착된 철 박막의 결정성, 비저항, 표면 상태, 조성등을 4 point 프로브, SEM, Auger spectroscopy등을 이용하여 조사하고 각각의 전위, 부식속도등과의 상관관계를 조사하였다. 증착된 박막의 비저항은 증착중 혼입된 산소의 양에 따라 매우 민감하게 변화하였다. 산소가 l0at%이상 함유된 철은 강의 알려진 비저항보다 수십배 높은 비저항을 보이며, 부식전위가 높아지고 실제 부식속도 또한 매우 낮게 나타났다. 박막의 부식거동은 미량 불순물에 의해서도 크게 변화하였는데 동일한 수준의 비저 항을 갖는 철 박막에서도 99.9% 순도의 철을 타켓으로 하여 증착된 막은 일반 저탄소 강을 타켓으로 하여 증착된 막보다 훨씬 낮은 부식속도를 보였다.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3253-3256
• /
• 2013

Lithium is a highly attractive material for high-energy-concentration batteries, since it has low weight and high potential. Rechargeable lithium-ion batteries (LIBs), which have the extremely high gravimetric and volumetric energy densities, are currently the most preferable power sources for future electric vehicles and various portable electronic devices. In order to improve the efficiency and lifetime, new electrode compounds for lithium intercalation or insertion have been investigated for rechargeable batteries. Solid-state nuclear magnetic resonance (NMR) is a very useful tool to investigate the structural changes in electrode materials in actual working lithium-ion batteries. To detect the in-situ microstructural changes of electrode and electrolyte materials, $^7Li-^{19}F$ double-resonance solid-state NMR probe with a static solenoidal coil for a 600-MHz narrow-bore magnet was designed, constructed, and tested successfully.