• Aerospace Engineering and Technology
• /
• v.2 no.1
• /
• pp.153-163
• /
• 2003

Electronic equipments and make other electronic systems to operate abnormally by means of electromagnetic interference, or can operate abnormally themselves by electromagnetic interference of other electronic systems. Therefore, electronic equipments are required to reduce their electromagnetic interference as small as for other systems to operate properly and operate properly within electromagnetic interference from other electronic systems. In order to prove that electronic equipments meet such requirements, they should undergo electromagnetic environmental test. In this study, we introduce electromagnetic environmental requirements, test procedures and test results of gimbal engine actuation system of KSR-III.

• Journal of Auto-vehicle Safety Association
• /
• v.8 no.2
• /
• pp.30-36
• /
• 2016

According to revolutionary developments in automobile technologies, various electronically controlled components of vehicles are rapidly increasing. A variety of advanced vehicles (hybrid vehicle, hydrogen fuel-cell vehicle, electric vehicle, etc.) using electrical energy source are increasing, too. The electromagnetic compatibility is getting more important for development of a vehicle because those advanced vehicles are equipped with more new electronic systems. In general, electromagnetic compatibility tests consist of an electromagnetic interference (EMI) test and an electromagnetic susceptibility (EMS) test. In this paper, in order to investigate the electromagnetic interference in the cabin of vehicle by various electric and electronic components of vehicles, a series of narrowband electromagnetic emission tests are conducted. For comparison, the several digital home appliances (smartphone under charging, laptop compuer and digital camera), which are used a lot in daily lives, are tested.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.7
• /
• pp.71-78
• /
• 2010

The objective of this research is to investigate the influence of material characteristic and design on to the electromagnetic interference (EMI) shielding characteristics. Basalt glass fiber reinforced composite specimens with stainless fiber conductive filler were manufactured to perform the electromagnetic interference shielding effectiveness(SE) experiments. In order to reflection and absorb the specimen in electromagnetic fields, flanged coaxial transmission line sample holder was fabricated according to ASTM D 4935-89. Electromagnetic shielding effectiveness(EMSE) was measured quantitatively to examine the electromagnetic shielding characteristics of designed specimens. The result of EMI shielding experiments showed that maximum EMSE value of sandwich type specimens with GSG(basalt glass fiber/stainless fiber/basalt glass fiber) and SGS(stainless fiber/basalt glass fiber/stainless fiber) were 65dB and 80dB at a frequency of 1,500MHz, respectively.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.3
• /
• pp.36-54
• /
• 1995

The error performance of digital radio signals (i.e., M-ary PSK signal, DQPSK signal, MSK signal, GMSK signal) interfered by impulsive noise and electromagnetic interference (EMI) is analyzed and discussed. In analysis at first, the error rate equations have been derived in an electromagnetic interference plus impulsive noise environment. And then, the error performance has been evaluated and shown in figures as a function of carrier-to-noise ratio, carrier-to-interference ratio, impu- lsive index, gaussian noise to impulsive noise power ratio, and interference index to measure the amount of error degradation in digital radio signals. From the obtained results we have known that in the presence of m-distributed tone interference plus inpulsive noise, the more significant the electromagnetic interference amplitude varies, the more significant performance degradation is produced. The listing the digital radio signals from the most degraded to the least is that DQPSK, GMSK, QPSK and MSK signal. In the constant amplitude tone interference plus impulsive noise environment, the effect of in- terference nearly disappears over about 20dB in CIR. The effect of constant tone interference on error rate performance is reduced more remarkably in the region from 10dB to 15dB in CIR. In both enviroments of m-distributed tone interference and constant amplitude tone interference, the more electromagnetic interference amplitude varies and CIR increases, the more error perfor- mance is improved. But it is found out that the performance can not be improved significantly even the electromagnetic interference becomes weak. This describes that the impulsive noise affects dominantly to the performance degradation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.2
• /
• pp.285-292
• /
• 2001

In this paper, the analysis model of a composite electromagnetic interference environment is proposed, and the composite interference consists of three types, i.e., impulse, sinusoidal, and rectangular type. Also, we have derived the p.d.f of the amplitude of the composite interference. And using a derived p.d.f, we have evaluated the performance of 16QAM (Quadrature Amplitude Modulation) system in a composite electromagnetic interference environment. From the results, it is known that when impulse type interference is weaker than the others, the shape of p.d.f is dominantly governed by the power component ratio of sinusoidal and rectangular type interference. On the other hand, when impulse type interference is stronger, the effect of the other two interference becomes insignificant. Also, It is shown that the smaller both impulsive index (A) and the mean power component ratio ($\Gamma$') in impulse type interference are, the worse the performance of 16QAM system is.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.1
• /
• pp.1-14
• /
• 1996

The purpose of this paper is to analyze the performance of M-ary PSK communication system according to the types of electromagnetic interference in an impulsive noise environment. We have introduced Gaussian, sinusoidal and rectangular waves as a electromagnetic interference. Using the derived equations, we evaluated the error performance of the BPSK and QPSK system in the presence of electromagnetic interference and impulsive noise. From results, we have obtained that the Gaussian wave produced the most significant performance degradation and that sinusoidal wave produced more performance degradation than rectangular wave. Therefore, without knowing the types of electromagnetic interference, it is best to regard it as Gaussian wave when designing a communication system. In addition, we could found out that the error performance degrades as impulsive noise becomes strong and the error performance can not be improved significantly even the electromagnetic interference becomes weak. Therefore, this describes that the impulsive noise affects dominantly to the performance degradation.

• Journal of information and communication convergence engineering
• /
• v.15 no.4
• /
• pp.237-243
• /
• 2017

This paper presents an analysis of the electromagnetic interference of a heterogeneous power bus where electromagnetic bandgap (EBG) cells are irregularly arranged. To mitigate electrical-noise coupling between high-speed circuits, the EBG structure is placed between parallel plate waveguide (PPW)-based power buses on which the noise source and victim circuits are mounted. We examine a noise suppression characteristic of the heterogeneous power bus in terms of scattering parameters. The characteristics of the dispersion and scattering parameters are compared in the sensitivity analysis of the EBG structure. Electric field distributions at significant frequencies are thoroughly examined using electromagnetic simulation based on a finite element method (FEM). The noise suppression characteristics of the heterogeneous power bus are demonstrated experimentally. The heterogeneous power bus achieves significant reduction of electrical-noise coupling compared to the homogeneous power buses that are adopted in conventional high-speed circuit design. In addition, the measurements show good agreement with the FEM simulation results.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.2
• /
• pp.116-122
• /
• 2002

Electro Explosive Devices can be susceptible to electromagnetic interference. When these components are exposed to external electromagnetic fields, it may cause to induce sufficient current to generate enough heat for an inadvertent detonation. It is almost impossible to monitor the event of firing throughout the electromagnetic environment test. The survivability of EED for hazards of electromagnetic radiation is investigated. A fiber optic sensor is installed near the bridge wire after removing explosive material in order to measure the induced current on the bridge wire. The length of lead-wire of the EED fabricated is around 15 cm.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.9
• /
• pp.916-923
• /
• 2002

In this paper, we propose dual-polarization technique which double the system capacity without increasing any other bandwidth. In theory, dual-polarization technique can double system capacity by using an orthogonal electromagnetic wave. However, cross-polarization interference and multipath interference degrade system performance in practice. To cope with this problem, we propose Cross Polarization Interference Canceller(XPIC) for ITS/DSRC system which can mitigate the XPI as well as multipath propagation interference. We also analyze and discuss its performance with relevant computer simulation results.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1835-1837
• /
• 2001

The interference of electromagnetic waves in factory is increasing according with development of industrial society and many use of electrical machinery. Electromagnetic wave is defined as the electrical and magnetic field formed by electrical and electronic equipment used in daily lives, which indiscriminatingly affects the human health and operation of machinery. The electromagnetic spectrum ranges from the shorter wavelengths(including gamma and x-rays) to the longer wavelengths(including microwaves and broadcast radio waves). Radiation that is not absorbed or scattered in the atmosphere can reach and affect on the operation of machine. In this study, electromagnetic wave that is interfered to the machine and human is detected in factory, and decrease method of electromagnetic wave interference is studied.