• 한국전기전자재료학회논문지
• /
• 제25권9호
• /
• pp.732-737
• /
• 2012

This study made a specimen (contact surface size: $45\;mm{\times}0.02\;mm{\times}45{\sim}55\;mm$) with silicon rubber for low voltage cable with 50 phr silica filler. The electrification voltage of electrostatics were measured for different sizes of contact surface with the applied voltage of 10kV and the environmental settings of temperature ($25{\sim}40^{\circ}C$) and humidity (40~80%). The following conclusions were made. The electrification voltage of electrostatics decreased as the humidity increased. The electrification voltage of electrostatics increased as the temperature increased. The larger the surface size, the higher the electrification voltage of electrostatics. The property of the material had more effect on the relaxation time than the humidity.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.116-119
• /
• 2004

According to industrial development, all fields using chemical instrument and material are generated an electrostatics. This paper is represented the electrostatics distribution analysis of industrial type Inkjet plotter. In order to such experiment, an electrostatics for each portions of plotter(OJ-62) are measured by electrostatic measurement. Based on these, the big large position of electrostatics was analyzed by finite element method(Maxwell-2D), Here it is showed an electrostatic inducement and electric charge theory required.

• 한국전기전자재료학회논문지
• /
• 제23권9호
• /
• pp.718-723
• /
• 2010

In this paper, the following results were obtained from the experiment in which electrification voltage of silicone rubber specimen for thermal bonding were measured under various time, temperature ($10{\sim}40^{\circ}C$), and humidity (30~90%) conditions and different amount of carbon additives (0~15 phr (per hundred resin)). Electrostatics electrification voltage decreased when carbon is up to 10 phr, and there was no electrification voltage in 15 phr condition. The electrostatics electrification voltage did not change over time. When the temperature was constant, electrostatics electrification voltage sharply dropped when the humidity was around 70%. That means, this condition might be appropriate for prevention of charging. The electrification voltage decreased as humidity and amount of carbon increased.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.12-15
• /
• 1987

The study on Electrostatics represents the first scientific interest of human being on electrical phenomena, and it led to enormous progress of electrical and electronic science and engineering up to the current levels. Electrostatics, however, has been long forgotten in the stream of this history as a tribial minor field. Interesting enough, this minor sector has regained recently its new life, in particular in the area of high-technologies, and Electrostatics is going to become one of the most important field in the future of electrical and electronics engineerings. It is impossible to cover the entire trend of this emerging field in a limited space, so that spot lights shall be focused on several important topics in this paper.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권3호
• /
• pp.159-167
• /
• 2006

According to industrial development, all fields using chemical instrument and material are generated an electrostatics. Electrostatic problems were very important part to all these components, moving system, printer, clothe machines etc. This paper was represented an analysis of electrostatic electrification by FEM (finite element method) of industrial type Inkjet plotter. Here electrostatics distribution analysis is accomplished by Maxwell-2D. We are showed an electrostatics generation source by rubbing and meager profits of electric charge. It know electronic values with each system position by experiment. These are decreased through earth and electricity shielding. Therefore this paper is proved by the simulation and experiment result.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1496-1499
• /
• 2005

This paper was represented an electrostatics distribution analysis using FEM(finite element method) with industrial type Inkjet plotter. Here, we know electronic value with each system position by experiment. these were decreased by discharge through earth and electricity shielding. According to industrial development, all fields using chemical instrument and material are generated an electrostatics. Based on these, the big large position of electrostatics was obtained metal base of controller, nonconductor fiber between two rubber roller, head controller by moving roller etc., Therefore these were showed an electrostatics generation source and by rubbing and meager profits electric charge.

• 식품기술
• /
• 제22권3호
• /
• pp.513-517
• /
• 2009

• 한국전기전자재료학회논문지
• /
• 제24권12호
• /
• pp.977-981
• /
• 2011

Non-wovens polyester rayon samples were manufactured, and the electrification properties of electrostatics were measured for three different samples (15 g/$m^2$, 25 g/$m^2$, and 40 g/$m^2$) with the environmental settings of temperature (20~40$^{\circ}C$) and humidity (40~90%). The conclusions are as follows. Heavy sample generated more static electricity when the temperature was constant. The static electricity decreased slowly when the humidity is less than 70%, while it sharply decreased over 70% humidity condition. For non-woven polyester rayon, static charge decreased as temperature and humidity increased. As the weight increased, less time were taken for the electrification voltage to drop to the half.

• 전기학회논문지
• /
• 제61권4호
• /
• pp.606-611
• /
• 2012

The similarity, analogy and equivalence between the phenomenon due to electric and magnetic dipoles have been discussed in the open literature for different situations. Here we are presenting the numerical proof of the trajectory of leakage electric field due to a semi-infinite electric dipole layer in the external periphery and the electric field in the space between oppositely charged surfaces. The result is also valid for the fringing electric field of a parallel plate capacitor. The result is also proved to be a dual of Amp$\grave{e}$re's law in the electrostatics due to a semi-infinite electric dipole layer.

• 한국인터넷방송통신학회논문지
• /
• 제10권6호
• /
• pp.235-241
• /
• 2010

정전기 발생에서 가장 직접적이고 주요인자는 주변 습도 상태이다. 대부분의 정전기 발생은 마찰에 의해 발생되는 마찰전기이며, 공기 중에 포함된 수분의 양에 따라 물체 주위에 하나의 얇은 전도 층을 형성하게 되어 발생하는 정전기 충전 전압을 물체 표면 전체에 흩어지게 하는 함수 역할을 하게 된다. 정전기 방전 현상은 순간적인 전압상승을 야기하며 경우에 따라서는 아주 치명적인 손상을 입히게 된다. 무기체계의 조립, 취급, 수송, 저장의 과정에서 쉽게 나타날 수 있는 정전기 방전 현상을 미연에 방지하기 위한 방법을 설계 하고 분석 한다. 이러한 방법은 각종 무기체계 개발 관련자들의 정전기 방전 보호를 위한 설계 지침을 제시하며, 정전기에 대한 대책을 수립할 수 있도록 규정과 지원을 해 줄 수 있다.