• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.238-244
• /
• 2000

FBGs have been extensively used as strain sensors or temperature sensors in a variety of applications related to composites because of embedding ability, small size and multiplexing capability. We inspected embedding environments inside composites with optical fiber by microscope analysis and birefringence characteristics of FBG embedded into textile composite laminate by cure monitoring using a high power WSFL. The cure monitoring of the cases with the striped FBG and the recoated FBG provided comprehensive understandings about the birefringence effect induced by the transverse stress. And these results allowed to consider a recoating method as an important tool to relieve birefringence.

• 마이크로전자및패키징학회지
• /
• 제9권2호
• /
• pp.55-60
• /
• 2002

전자제품의 경박단소화는 관련 부품들의 개별적인 소형화, 경량화 또는 여러 가지 부품들을 집적시켜 모듈화 시키는 것을 요구한다. 최근에는 실장밀도를 향상시키기 위하여 저항, 축전기, 인덕터 등의 수동소자들을 다층인쇄회로기판에 내장시키고자 하는 연구들이 널리 수행되고 있다. 본 고에서는 먼저 여러 가지 수동소자들의 기능을 살펴본 후, 수동소자들을 기판에 내장시키고자 하는 연구의 필요성과 이 기술을 상업화하기 위하여 앞으로 해결해야 할 문제들에 관하여 살펴보고자 한다.

• 한국안전학회지
• /
• 제21권3호
• /
• pp.94-100
• /
• 2006

The goal of this study is to show the way to increase the safety of deteriorated PSC beam bridges by the to-box reinforcing method. This method is to change the open girder section into the closed box section by connecting bottom flanges of neighboring PSC girders with the precast panels embedding PS tendons at the anchor block. The box section is composed of three concrete members with different casting ages, RC slab, PSC beam, precast panel. This different aging requires a time-dependent analysis considering construction sequences. Reliability index and failure probability are produced by the AFOSM reliability analysis. Transversely five schemes and longitudinally two schemes are considered. The full reinforcing scheme, transversely and longitudinally, shows the highest reliability index, but it requires more cost for retrofit. The partial reinforcing scheme 4, 4-1 are recommended in this study as the economically best scheme.

• 대한기계학회논문집A
• /
• 제28권6호
• /
• pp.677-684
• /
• 2004

Plastic and creep deformations of solder joints during thermal cycling are the main factors of misalignments and power losses in optical telecommunication components. Furthermore, the increased mismatch between solder Joint-bonded areas may cause severe failure in the components. Darveaux's creep model was implemented into a finite element program (ABAQUS) to simulate creep response of solder. Based on the finite element results, thermal fatigue reliability was predicted by using various fatigue life prediction models. Also, the effects of ramp conditions, dwelling time, and solder joint-embedding materials on the reliability were investigated under the thermal cycling conditions of the Telcordia schedule (-40∼75$^{\circ}C$).

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1994년도 추계학술대회
• /
• pp.142-146
• /
• 1994

This paper proposes an fill-factor algorithm that determines embedding parameters which are needed in optimal attractor reconstruction. For reliability test, using this algorithm, we reconstructs the attractor of numerical chaotic data such as Duffing equation, Lorenz equation and Rossler equation whose embedding parameters are known. Also we reconstructs the attractor of experimental data and evaluates correlation dimension. Experimental data used in this paper are 38 ECG data of AHA(American Heart Association) ECG database. For numerical chaotic data, correlation dimension and Lyapunov exponent of reconstructed attractor are very close to those of attractor using original coordinate system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권8호
• /
• pp.3224-3242
• /
• 2020

Internet of Things (IoT) networks composed of a large number of sensors and actuators generate a huge volume of data and control commands, which should be enforced by strong data reliability. The end-to-end data reliability of IoT networks is an essential industrial enabler. Blockchain technology can provide strong data reliability and integrity within IoT networks. We designed a lightweight end-to-end blockchain network that applies to common IoT applications. Its enhanced modular architecture and lightweight consensus mechanism guarantee its practical applicability for general IoT applications. In addition, the proposed blockchain network is highly software compatible because it adopts the Hyperledger development environment. Directly embedding the proposed blockchain middleware platform in small computing devices proves its practicability.

• Journal of Welding and Joining
• /
• 제31권3호
• /
• pp.84-88
• /
• 2013

These days embedded technology may be the most significant development in the electronics industry. The study focused on the development of active device embedding using flexible printed circuit in view of process and materials. The authors fabricated 30um thickness Si chip without any crack, chipping defects with a dicing before grinding process. In order to embed chips into flexible PCB, the chip pads on a chip are connected to bonding pad on flexible PCB using an ACF film. After packaging, all sample were tested by the O/S test and carried out the reliability test. All samples passed environmental reliability test. In the future, this technology will be applied to the wearable electronics and flexible display in the variety of electronics product.

• Composites Research
• /
• 제15권3호
• /
• pp.30-38
• /
• 2002

다른 광섬유 센서와 마찬가지로 광섬유 브래그 격자센서도 삽입가능의 장점을 가진다. 삽입가능과 관련된 실제적 가티를 높이기 위해서 본 논문에서는 복합재 평판에 삽입된 브래그 격자센서의 안전성과 스펙트럼특성이 연구되었다. 피복광섬유와 피복이 벗겨진 광성유의 삽입 환경이 현미경 분석에 의해 수행되어졌고 이 현미경 사진들과 성형모니터링 (cure monitoring)의 결과를 기초하여, 저복굴절(Li-Bi) 광섬유에 새겨진 브래그 격자의 단일 브래그 조건을 붕괴하는 주원인이 성형 잔류음력임을 확인했고 이로 인해 광성유가 겪게 되는 응력/변형률 상태를 정략적으로 보고하였다. 또한 성형모니터링은 브래그 공진파장이 어떻 게 분리되어져 가는지 묘사하였고 횡응력 미감도 브래그 격자(TIG)가 재코팅 방법에 의해 쉽게 획득되어짐을 보였다. TIG는 실시간 신호 처리와 관련하여 중요만 장점으로 작용한다.

• 정보과학회 논문지
• /
• 제44권4호
• /
• pp.399-410
• /
• 2017

본 연구는 전문기관에서 생산되는 검증된 문서의 정보를 웹상의 수많은 검증되지 않은 문서에 자동 주석하여 신뢰도를 향상하고 심화 정보를 추가하는 시스템을 제안한다. 제안하는 시스템은 국가암정보센터의 검증된 문서들에서 추출한 19,304개 명제를 위키피디아 암 관련 문서에서 추출한 1,486개 명제에 주석하는 과제를 수행하기 위해, 기존 인공 신경 정리 증명계의 순환 모듈을 단어 임베딩 모듈로 교체하였다. 이를 통해 기존의 근본적인 문제점이었던 학습 시간 문제를 해결하였고, 동일한 환경에서 기존 시스템의 학습 시간이 233.9일로 추정된 것에 비해 재구축한 시스템은 102.1분 내로 학습이 완료되었다. 제안하는 시스템의 장점은 명제를 텐서로 인코딩하여 미분 가능하게 전체적인 연산을 진행하는 인공 신경 정리 증명계가 단어의 정확한 일치를 파악하는 전통적인 정리 증명계를 포함하며 동시에 유사어 관계로부터의 논리 전개 역시 가능하게 한다는 점을 실제 문서 데이터에서 입증했다는 것이다.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제2권3호
• /
• pp.167-173
• /
• 2002

In this paper, we propose an interactive genetic algorithm (IGA) to implement an automated 2D avatar synthesis. The IGA technique is capable of expressing user's personality in the avatar synthesis by using the user's response as a candidate for the fitness value. Our suggested IGA method is applied to creating avatars automatically. Unlike the previous works, we introduce the concepts of 'hidden population', as well as 'primitive avatar' and 'simplified genotype', which are used to overcome the shortcomings of IGA such as human fatigue or reliability, and reasonable rates of convergence with a less number of iterations. The procedure of designing avatar models consists of two steps. The first step is to detect the facial feature points and the second step is to create the subjectively optimal avatars with diversity by embedding user's preference, intuition, emotion, psychological aspects, or a more general term, KANSEI. Finally, the combined processes result in human-friendly avatars in terms of both genetic optimality and interactive GUI with reliability.