• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.7
• /
• pp.771-777
• /
• 2014

Injection-compression molding was used for film insert molding of an automotive door grip using films with three-dimensional embossed patterns. A vacuum mold was fabricated for vacuum-assisted thermoforming of the film, and an injection-compression mold was developed for film insert molding. Three pressure transducers were installed inside the mold cavity to measure cavity pressures. Injection-compression molding experiments under various compression strokes and toggle speeds were performed to investigate their effects on the cavity pressure and heights of the embossed patterns. The compression stroke of 0.9mm and low toggle speed resulted in a higher degree of conservation of embossed patterns. Additionally, the processing conditions for the maximum heights of embossed patterns were almost similar to those for minimum integral value of cavity pressures. The injection-compression molding process presents the opportunity to impart a soft-touch feeling of plastic parts printed with embossed patterns.

• Tribology and Lubricants
• /
• v.30 no.5
• /
• pp.284-290
• /
• 2014

The influence of round embossed surface on slider bearing characteristics and its load carrying capacity is discussed for thin film effect of embossed slider bearing. For the numerical computation of lubrication parameters such as pressure, load capacity and shear stress that are normalized and a Reynolds equation is used for the analysis of embossed slider bearing characteristics. For this purpose, the finite difference method of central difference scheme is used in this study. In a slider bearing with embossed form, several simulation parameters such as pressure, load capacity and shear stress of the bearing can be obtained according to independent parameters such as the slope of the slider bearing and number of embossing in the upper slider. Also this results can be summarized and be stored in sequential data file for latter analysis. After all, their distribution of the pressure and shear stress parameters can be displayed and be analyzed easily by using the developed program with matlab GUI technique. The independent parameters such as a number of embossing and a slope of the embossed surface slider are used for discussing simulation parameters of pressure distribution, shear stress and load carrying capacity of the round embossing. These study results reported in this paper should be applied to the other shaped slider bearing with a rectangular embossed surface or rectangular waved surface.

• ETRI Journal
• /
• v.36 no.5
• /
• pp.847-855
• /
• 2014

We developed a highly refractive index planarization layer showing a very smooth surface for organic light-emitting diode (OLED) light extraction, and we successfully prepared a highly efficient white OLED device with an embossed nano-structure and highly refractive index planarization layers. White OLEDs act as an internal out-coupling layer. We used a spin-coating method and two types of $TiO_2$ solutions for a planarization of the embossed nano-structure on a glass substrate. The first $TiO_2$ solution was $TiO_2$ sol, which consists of $TiO_2$ colloidal particles in an acidic aqueous solution and several organic additives. The second solution was an organic and inorganic hybrid solution of $TiO_2$. The surface roughness ($R_a$) and refractive index of the $TiO_2$ planarization films on a flat glass were 0.4 nm and 2.0 at 550 nm, respectively. The J-V characteristics of the OLED including the embossed nano-structure and the $TiO_2$ planarization film were almost the same as those of an OLED with a flat glass, and the luminous efficacy of the aforementioned OLED was enhanced by 34% compared to that of an OLED with a flat glass.

• The Journal of the Korea Contents Association
• /
• v.9 no.2
• /
• pp.193-202
• /
• 2009

This dissertation is considerably studied Faction Genre which is embossed as a new image content, and it is figured out practical used works' possibilities for Korea film production's varieties. Faction, a neologism, which is combined by Fiction and Fact, is a boundary as limits. If authentic history is closed to a truth, it is a record history description method. Also, if unauthorized history is closed to a fake, it is a fictitious history description method. In addition, macro history and micro history are respectively connected to social criticism's matter and personal action, and these can make various analyses, depend on a boundary's limits and personal analysis. On the other hand, history film could be remembered to audience merely history film itself without existed history's fact. However, there are Faction Genre's Genre possibility and film's attraction which indirectness experience of historic fact could be experienced through film. For Faction Genre’s developing solution, there are three cognitive switches; audience's interpretation ability about history film through watching perception, linking between the past and the present for audience through communication with history, audience's considerable decision about history first or fiction first as film writer's interpretation. Above all, hopefully filmic pressure can be shown with historical true to audience. Therefore, it would be Korea Faction Genre's attraction and hope.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.5
• /
• pp.35-42
• /
• 2014

The influence of sine wave striated surface roughness on load carrying capacity of a bearing is studied for thin film effect of slider bearing. A Reynolds equation appropriate for slider bearing is used in this paper for analysis and it is discussed using finite difference method of central difference scheme. For a slider bearing with sine wave simple roughness form, several parameters such as pressure, load capacity and shear stress of the bearing can be obtained and also this results can be stored in sequential data file for latter analysis. After all, their distribution can be displayed and analyzed easily by using the matlab GUI technique. The parameters such as amplitude, number of waviness and slope of the surface are used for discussing the load carrying capacity of the rectangular bearing. The results reported in this paper should be applied to the other slider bearing such as rectangular or round embossed surface of slider bearing.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.05a
• /
• pp.185-190
• /
• 2005

Safe, economical and environment-friendly tunnel construction are required again along with social continuous development, the importance of waterproof work that is portion that actually all of user and builder can find that is embossed by tunnel construction's one of important construction. Also, ECB (Ethylen Copolymer Bitumen) sheet that is used in existing tunnel waterproofing method (ECB waterproofing method) being black because asphalt (Bitumen) is added, by purpose that make illumination of tunnel interior brightly and scar discovery eases in sheet with coating white film, but ECB that is used present according as ECB that asphalt is added does not satisfy high tensile strength of construction field, quality standard of extension. Also ECB denigrates color of black M/B that asphalt is excepted.

• The Journal of the Korea Contents Association
• /
• v.11 no.12
• /
• pp.162-170
• /
• 2011

Through this thesis, I intended to analyze Hollywood animation through that achieved in box office by directing viewpoint. of Chris Sanders and Dean Deblois not only shows standard narrative structure of adventure, comedy, fantasy, but also express message of story and thorough visual. Analysis of directing classify contents and form. In contents, constitution of narrative and set up of character, irony of plot, characterization and popularity are embossed. In form, lighting and special effect, design and layout, 3D technology and stereoscopic camera technique based on the capital strength are outstanding. The high evaluation for film is possessed of box offic, remained within value and popularity, and delivered metaphysical theme without repulsion. The director's direction make success even if the pre-production manage by huge system approach.

• Journal of Digital Contents Society
• /
• v.16 no.1
• /
• pp.113-121
• /
• 2015

Artifact pattern representation of a method using the digital technology is largely are two digital rubbing technique and digital contrast technique. Digital rubbing technique is clearly with the naked eye to see the original prestigious and difficult to build a digital rubbing data patterns by scanning a prestigious and patterns carved into the artifacts in three dimensions without compromising the circle to represent the three-dimensional effect by contrast it to the objective value refers to a technique that can be represented in digital. Digital contrast technique can not be calculated if the depth information of the object due to the glassy film of artefacts in a three-dimensional surface scanning and the application of this technique refers to a realistic image mapped digital technique for generating digital image contrast. Digital rubbing technique is mainly useful to express the most prestigious and patterns expressed in pottery or tile and stone monument, etc. engraved or embossed, digital contrast techniques can be used effectively to artifacts such as magnetic or glass can not be applied to the digital rubbing technique.