• Korean Journal of Microbiology
• /
• v.45 no.4
• /
• pp.419-424
• /
• 2009

To provide the basis of biosensor based on the lux genes from bioluminescent bacteria of Photobacterium leiognathi and Vibrio harveyi, we test the expression of lux genes in several strains of Escherichia coli. The expression of the recombinant plasmid of PlXba.pT7-3, containing all lux genes requiring for light emission without adding substrate, in E. coli 43R was so strong to see the blue-green light in single colony as well as in the alginate immobilized cell. In addition, the light intensity was decreased by adding heavy metal ion such as cadmium and zinc ions. These result raise the possibility that a biosensor can be developed using the lux genes system.

• Korean Journal of Materials Research
• /
• v.13 no.8
• /
• pp.497-502
• /
• 2003

Crystallographic characteristics and interfacial structures of $Al_2$$O_3$and $ZrO_2$dielectric films prepared by atomic layer chemical vapor deposition (ALCVD) were investigated at atomic scale by high-resolution transmission electron microscopy (HRTEM) and energy dispersive X-ray spectroscopy (EDS)/electron energy-loss spectroscopy (EELS) coupled with a field-emission transmission electron microscope. The results obtained from cross-sectional and plan-view specimens showed that the $Al_2$$O_3$film was crystallized by annealing at a high temperature and its crystal system might be evaluated as either cubic or tetragonal phase. Whereas the $ZrO_2$film crystallized during deposition at a low temperature of ∼$300^{\circ}C$ was composed of both tetragonal and monoclinic phase. The interfacial thickness in both films was increased with the increased annealing temperature. Further, the interfacial structures of X$ZrO_2$$O_3$and $ZrO_2$films were discussed through analyses of EDS elemental maps and EELS spectra obtained from the annealed films, respectively.

• Tuberculosis and Respiratory Diseases
• /
• v.70 no.4
• /
• pp.330-337
• /
• 2011

Background: The clinicopathologic characteristics of patients with non-small cell lung cancer (NSCLC) have been changing. Recently, Positron emission tomography-computed tomography (PET-CT) has usually been used for diagnosis, follow-up to treatment and surveillance of NSCLC. We studied the pattern of recurrence and prognosis in patients who underwent complete resection for NSCLC according to histologic subtype. Methods: All patients who underwent complete resection for pathological stage I or II NSCLC between January 2005 and June 2009 were identified and clinical records were reviewed retrospectively, especially the histologic subtype. Results: Recurrences were identified in 50 of 112 patients who had complete resection of an NSCLC. Sites of recurrence were locoregional in 15 (30%), locoregional and distant in 20 (40%), and distant in 15 (30%). Also, sites of recurrence were intra-thoracic in 29 (58%), extrathoracic and intra-thoracic recurrence in 15 (30%), and extrathoracic in 6 (12%). In locoregional recurrence, there was 37% recurrence for non-squamous cell carcinoma (non-SQC) and 25% for squamous cell carcinoma (SQC). In distant recurrence, there was 39% recurrence for non-SQC and 18% for SQC. Locoregional recurrence in the bronchial stump was more common in SQC than non-SQC (14% vs. 45%, p=0.025). Prognosis of recurrence was not influenced by histologic subtype and the recurrence-free survival curve showed that the non-SQC group did not differ from the SQC group according to stage. Conclusion: The prognosis for recurrence does not seem to be influenced by histologic types, but locoregional recurrence in the bronchial stump seems to be more common in SQC than non-SQC in completely resected stage I and II NSCLC.

• Journal of the Korean earth science society
• /
• v.23 no.5
• /
• pp.416-423
• /
• 2002

The concentrations of dimethylsulfide (DMS) and carbon disulfide (CS$_2$) were measured concurrently with relevant environmental parameters at Kosan, Cheju during Apr 2001. Results of our analysis indicate that the combined temporal variations of both DMS and CS$_2$ record three distinctible patterns that are separable from each other. For instance, DMS behaved very similarly to CS$_2$ during the 1st (5${\sim}$18 Apr) and 3rd period (23${\sim}$26 Apr). The pronouncingly high concentration of CS$_2$ was maintained during the first period, but DMS values peaked mostly during the third period. It was furthermore striking to find that changes in DMS levels occurred in an opposite direction relative to CS$_2$ during the 2nd period. Although most of these variabilities appear to be associated with the interaction of source/sink processes and the air parcel movement, certain aspects of their behavior are found to be highly complicated enough to account for.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.2
• /
• pp.82-89
• /
• 2009

According to the great city development and the rapid growth of redevelopment project, waste concrete emission has been increased. Waste concrete powder is one of the by-product originated from the recycling of the waste concrete. The more making high quality recycled aggregate to use aggregate for concrete, the more waste concrete powder is producted relatively. Therefore, to realize the total recycling of waste concrete, development of recycling technology for waste concrete powder need very much. This technical note present the discharged process and the various properties of waste concrete powder. As the results, on the average, the maximum particle-size of waste concrete powder is less than $600{\mu}m$, and oven-dry density is less than $2.5g/cm^3$. And waste concrete powder contains more than 50% of $SiO_2$, 30% of CaO and 10% of $Al_2O_3$. Thus qualities of waste concrete powder is lower than those of high quality raw material for concrete. However, if it is processed by grading to the purpose, it will be used as resource of raw materials for construction field.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.1
• /
• pp.103-110
• /
• 2010

Recently, reducing usage of cement and using by-product of industry such as blast furnace slag and fly-ash have been increased to reduce $CO_2$ gas emission. That apply to construction. As a result, reduction of environmental stress and recycling of resources are expected. In this study, as basic study to the reuse of resources and reduce Environmental Load, comparing and analyzing hardening characteristics and durability as using the blast furnace slag and fly-ash, examining concrete characteristics substituted the three elements for the blast furnace slag and fly-ash and evaluating the relationship as binder. Through this, it want to provide the basic data for mass utilization. Blast furnace slag powder and replaced at fly-ash compressive strength of concrete in the strength of the initial seven days material age lower level of expression significantly compared to the concrete, but, 28 days after the similar or higher compressive strength than the concrete expression of the was. In addition, the reserves replacement of blast furnace slag powder salt injury increasing resistance are seen improvements, according to the conventional blast furnace slag powder study by the chloride ions on the surface of the concrete are improved being fixation salt injury resistance is considered.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.1
• /
• pp.47-54
• /
• 2017

Cement industry is typical carbon-emission industry. If the industrial by-products(granulated blast-furnace slag (GGBFS), fly ash, etc.) are used a large amount, it might be able to reduce cement consumption and mitigate carbon emissions. In this case, however, decrease of early strength is relatively large. Therefore, there is a limitation in increase of the amount of substitute. Considering these circumstances, it would be a good solution to reduce carbon emissions in cement industry to improve the performances of mixed cement through proper alkali-activation in Portland blended cement using GGBFS or fly ash. Therefore, this study prepared concrete in ready-mixed concrete manufacturing facilities with an addition of a binder which used 2.0% modified alkali sulfate activator after mixing Portland cement, GGBFS and fly ash in the ratio of 4:4:2 and assessed its basic properties. The results found the followings: The use of modified alkali-sulfate activator slightly reduced slump and shortened setting time. As a result, bleeding capacity decreased while early strength improved. In addition, there is no big difference in carbonation resistance. It appears that there should be continued experiments and analyses on the related long-term aged specimens.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.4
• /
• pp.52-60
• /
• 2018

In the construction industry, attempts to evaluate the environmental impact of products through life cycle assessment (LCA) approach has been on the rise. However, the domestic construction industry needs to make rapid decisions due to limited budget and schedule, so it is difficult to carry out a review of the environmental load on all resources. The decision-making process requires information on the major influence factors that should be focused on to reduce environmental load. And this information should be quantified so that it can be linked to environmental impact assessment. In this study, the LCA results of road construction cases were analyzed to provide such information. As a result, diesel, ready-mixed concrete, urethane-based paint, aggregate, and asphalt concrete were found to be the main factors that generated 93.17% of the environmental load in the earthwork type of road project. The total environmental cost caused by these affecting factors when constructing 1 km of earthwork type of road project is 242 million won. The analysis also shows that a 10% reduction in the amount of ready-mixed and asphalt concretes can reduce carbon emissions by 5.02% and 2.28% while reducing environmental costs by 11 million won per kilometer. In order to reduce carbon emissions of the earthwork type of road project, it is necessary to actively develop and introduce new methods and eco-friendly materials to reduce the overall use of ready-mixed concrete and asphalt concrete.

• Korean Chemical Engineering Research
• /
• v.44 no.6
• /
• pp.669-675
• /
• 2006

Toluene of aromatic compounds, MEK of ketones and IPA of alcohols were extremely used as VOCs (Volatile Organic Compounds) on the getting into step with industrial process. The adsorption characteristics of three component solvent vapors (Toluene-MEK-IPA) on the activated carbonaceous adsorbents such as AC, ACF and AC+ACF were investigated in a stainless steel fixed bed adsorption experimental apparatus in order to identify those carbons for eliminating and recovering solvent vapors from industrial emission sources. The used activated carbonaceous adsorbents were pelletized commercial activated carbon and activated carbon fiber. The breakthrough curves and adsorption capacity have been obtained at atmospheric pressure in a adsorption fixed bed. It has been found that non-polar and larger molecules have been adsorbed better than polar and smaller molecules. Especially, alcohols and ketones were poorly adsorbed due to competitive adsorbability in ternary mixture system. However, it could be overcome by employment of activated carbonaceous adsorbent which have different porosity distribution appropriately.

• Korean Chemical Engineering Research
• /
• v.44 no.6
• /
• pp.631-635
• /
• 2006

To investigate the characteristics of substitute natural gas (SNG) production from direct coal methanation, the continuous lab-scale entrained flow hydrogasifier (I.D. : 0.025 m, Height : 1.0 m) was used in this experiment. The hydrogasification system consisted of high pressure gas handling system, high pressure coal feeder, entrained flow hydrogasifier, and unreacted char separator. The experiment was performed at the various conditions of reaction temperature ($600{\sim}800^{\circ}C$), $H_2$/coal ratio (0.2~0.4), and coal feed rate (0.8~2.5 g/min). Although it was shown that carbon conversion was different trends with coals from the methanation results for 6 sample coals, the carbon conversion increased with increasing reaction temperature. And it increased with increasing H2/coal ratio, whereas the concentration of CH4 decreased. Also. the carbon conversion increased with the carbon content of coal sample and had a maximum value at volatile matter content of 35 wt％.