• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.255-258
• /
• 2000

This paper presents an Interprocessor Communication Network(IPC net) in ATM switching system. In order to supply stable and independent path for processor communication, additional network i.e., Ethernet, is suggested. An Ethernet switch centered on Ethernet binds each processor into a work range. IPC net proposed in this paper assures end-to-end inter-processor connection, uniform 100Mbps Ethernet bandwidth and enhanced user cell throughput of ATM switch with minimum Ethernet supporting block integrated into ATM system

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.5
• /
• pp.27-36
• /
• 2004

In this paper, we propose the ethernet Inter-Processor Communication (IPC) network architecture and 10gigabit ethernet frame multiplex/demultiplexer architecture for the edge switch system based on Linux that has 10 Gigabit Ethernet (10Gigabit Ethernet) port with 72Gbps capacities. we discuss the ethernet IPC with ethernet switch and we propose design and implementation of ethernet Inter-Processor Communication (IPC) network architecture and multiple gigabit ethernet frame rnultiplexing/demultiplexing scheme to handle 10gigabit ethernet frame instead of using 10gigabit network processor. And then ethernet Inter-Processor Communication (IPC) network architecture and 10gigabit ethernet frame MUX/DMUX architecture is designed verified and implemented.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.602-605
• /
• 2001

This paper focus on a method to use Ethernet Network for Industrial Communication Network. Ethernet use the CSMA/CD MAC(Medium Access Control) Protocol at the Data-Link Layer, Which isn't suit for Industrial Communication Network requiring Real-Time Communication, periodic data processing, critical data processing characteristics. In this paper we proposed the Virtual Polling Algorithm at the Application Layer will be solution of using the Ethernet Network for the Industrial Communication Network, Proposed Algorithm terminate the Collision in the network thus Delay Time is reduced and Real-Time Communication will be implemented.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.1129-1132
• /
• 1999

This paper deals with the design and implementation of an Ethernet-based communication protocol to be used in PC-based I/O interface systems. Recently, the performance of PC systems is being highly improved and Ethernet is used as the stable communication network over the world. We develop a new protocol driver with the capability of accessing Ethernet directly using NDIS(Network Driver Interface Specification), the network interface standard of Windows O.S. in PC, and install it at the application layer of the protocol structure. Its major roles are the supplement of CSMA/CD algorithm, the effective use of the long data frame of Ethernet, and the real-time transmission of data frames. This paper represents the possibility of the real-time control network and systems based on PCs and Ethernet.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.362-367
• /
• 2005

Control network adopted in the national power-plant or manufactory are mostly vendor-dependent products, which have their own special specification, components and individual communication methods. These systems not only raise installation cost, but also bring many difficulties to maintenance and extension. To overcome these problems, this paper introduces a development and application case of a new "PC/Ethernet-based fieldbus" architecture and protocol to be used in mid-level fieldbus. The designed system has a basic idea of "3 Layers fieldbus over Standard-LAN" and implemented on PCs. PC gives user friendly environment. By using an open standard Ethernet in layer 1,2, the system has low cost, wide communication bandwidth and high compatibility. Layer 3 protocol designed for large realtime data communication makes user bypass TCP/IP layer and gives user direct access to the Ethernet. This new protocol eliminates potential collision of Ethernet, and transmits large periodic/non-periodic control data by using long-frame/wide-bandwidth of Ethernet effectively, and offers simple API-Services to the upper layer. Since the system have installed in H-power plant simulator and U-nuclear power plant simulator in Korea, it have been proved to be efficient and stable without any trouble in realtime communication service for full-scope plant simulator that has a lot of control elements.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.12
• /
• pp.1841-1854
• /
• 1993

In this paper, the packet voice protocol for the transmission of voice signal onto ethernet is implemented in a personal computer (PC). The packet voice protocol used is a modified one from CCITT G.764 packetized voice protocol. The hardware system to facilitate the voice communication onto ethernet is divided into telephone interface, speech processing, PC interface and controllers. The software structure of the protocol is designed according to the OSI seven layer architecture and is divided into three routines : ethernet device driver, telephone interface, and processing routine of the packet voice protocol. Experiments through ethernet with telephone interface show that this packet voice communication achieves satisfactory quality when the network traffic is light.

• Journal of Power Electronics
• /
• v.9 no.1
• /
• pp.100-108
• /
• 2009

Designing communication architecture for substation automation is a challenging and subtle task for visualizing substations in the digital world under the umbrella of IEC61850. Communication paradigms for substation automation are of critical importance because of two reasons; the communication arena is changing daily and opts for convenience and simple deployment at a lower migration cost and interoperability is one of the core constrains of IEC61850 for substation automation. This paper presents an analysis and outline of the crucial need for the deployment of Gigabit Ethernet in substations and also presents suggestions on how Ethernet technology can help in substation automation. Ethernet is one of the most pervasive communication technologies available and can provide a long term solution in the changing arena of communication. We have performed simulations in NS-2 to prove that our suggested communication paradigm is optimal in various regards with consideration of the constraints imposed by IEC61850.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.3
• /
• pp.414-416
• /
• 2013

As the usage of the electric power train increases, the importance of the control network between the electric control devices grows. IEC proposed a revision of IEC-61375, a standard of the networking among electric devices within a train, to adopt Ethernet as a backbone of train network. This paper performed the reliability analysis of three configurations of Ethernet-based networking within a electric power train that are recommended in IEC-61375 standard. The analysis results show that MTTF(mean time to failure) of the redundant configuration is 20,086 hours, which is a about 3 times longer than the linear configuration.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.6
• /
• pp.297-302
• /
• 2012

RAN in mobile backhaul network connects base station to mobile backhaul network. This the interfaces for several generations mobile communication technologies, such as TDM, ATM, and Ethernet in cell site, and then Ethernet in mobile backhaul site. In near future, the mobile communication network will be changed to all IP/Ethernet one, and then ultimately Ethernet and TDM traffics will be transferred through IP network. So these technologies have to be encapsulated for transferring to the mobile backhaul network. The performances are measured for each encapsulation, such as ATM, MPLS, IP/UDP, and MEF8.

• Journal of information and communication convergence engineering
• /
• v.1 no.1
• /
• pp.6-11
• /
• 2003

In general, standard TCP/IP (transmission control protocol-internet protocol), which is called TCP/IP, is using as the communication basis protocol between any collections of networks that is connected. In this paper, using this TCP/IP implementation of remote control system and suitable program for long distance communication is proposed. This system can make system, which basic Ethernet and TCP/IP used system, to mini modeling, so all module that is using here can be used. Therefore, intention of this paper is to reduce expenses, to effective manage for plant and to increase of productivity as linking each plant of several factory to TCP/IP and Ethernet, and then many control plant and manager minimize the needed course.