• 센서학회지
• /
• 제5권6호
• /
• pp.7-14
• /
• 1996

저온에서 동작 가능한 센서를 개발하기 위하여 $Co_{3}O_{4}$ 후막 소자를 제조하였다. $Co_{3}O_{4}$ 분말은 질산코발트 수용액으로부터 침전하여 얻었으며 binder인 ethylene glycol과 혼합하여 알루미나 기판상에 후막을 인쇄하였다. 제조된 후막에 대해 binder 함량 및 열처리 조건에 따른 부탄가스의 감도 및 회복성을 조사하였다. 동작 온도 $250^{\circ}C$에서 15% ethylene glycol을 함유한 $Co_{3}O_{4}$ 분말을 $300^{\circ}C$ 에서 24시간 동안 열처리한 소자가 부탄가스에 대하여 최고의 감도를 나타내었다. 감도는 500ppm 부탄가스에 대하여 1.1 정도로, 동작 온도 $350{\sim}400^{\circ}C$에서 상용 $SnO_{2}$ 가스 감지 소자의 감도 $0.8{\sim}0.85$와 비교할 때 매우 높았다. 응답 특성은 매우 좋았으나 회복성은 나쁜 것으로 나타났다.

• Journal of the Korean Wood Science and Technology
• /
• 제32권5호
• /
• pp.86-92
• /
• 2004

본 연구는 백탄보드와 오버레이 백탄보드를 비포름알데히드계 수지 접착제를 사용하여 습식공법으로 제조하고, 백탄보드의 포장용 상자로서의 기능을 검토하기 위하여 에칠렌가스 흡착과 딸기의 보관성을 측정하였다. 그결과, 백탄보드의 에칠렌 가스 흡착성능은 종이보다 월등히 좋았고 백탄 자체보다 높았으며, 오버레이 백탄보드와 비오버레이 백탄보드간 가스흡착성능은 차이가 없었다. 종이상자와 PVC상자 내 딸기와 백탄보드상자 내 딸기의 잿빛곰팡이 발생시간을 비교한 결과, 각각 2일 후, 4일 후로 나타났으며 박엽지와 부직포 사이의 흡착성의 차이도 역시 없었고, 백탄보드의 보관성 효과가 약 2배 좋았다. 결과적으로 백탄보드의 종류(혼합형, #40-60형)나 박엽지와 부직포 오버레이 백탄보드간의 신선도 유지효과의 차이는 없었다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.286-288
• /
• 2014

This study deals with the catalyst free radio frequency plasma assisted polymerization of ethylene glycol using nitrogen as reactive gas to modify the surface chemistry and morphology. The deposited film was characterized through various analysis techniques i.e. surface profilometry, Forier transform infrared spectroscopy, water contact angle and UV-visible spectroscopy to analyze film thickness, chemical structure, surface energy and optical properties respectively. The surface topography was analyzed by Atomic force microscopy. It was observed that the ethylene oxide behaviour and optical transmittance of the film were reduced with the introduction of nitrogen gas due to higher fragmentation of monomer. However the hydrophilic behavior of the film improved due to formation of new water loving functional groups suitable for biomedical applications.

• 한국포장학회지
• /
• 제23권2호
• /
• pp.97-101
• /
• 2017

Fruits are subjected to a variety of vibration stress during the transportation from a production area to markets. Vibration inputs are transmitted from the transporting vehicle through the packaged fruit. And the steady state vibration input may cause serious internal damage of fruit. Product quality of fruits declines by various factors while they are stored right after harvesting and among the substance in charge of post ripening action, ethylene ($C_2H_4$) biosynthesis increases fruits' respiration process after harvesting and decreases storage expectancy. Ethylene production of apples rapidly increases while storage duration becomes longer. This tendency is much clearer for the apples with vibration stress at input acceleration level. When there was no vibration stress, change in ethylene production level of apples are not very large during storage. Ethylene production rates inside the gas collecting container increased significantly ($p{\leq}0.05$) after 24 hours storage, particularly for apples with vibration stress ($0.7{\mu}l/kg{\cdot}hr$ (1st stack), $0.78{\mu}l/kg{\cdot}hr$ (2nd stack), $0.96{\mu}l/kg{\cdot}hr$ (3rd stack)); whereas less ethylene was produced in control apples ($0.18{\mu}l/kg{\cdot}hr$ during storage. Also ethylene production rates of apples according to the stack position were significantly different ($p{\leq}0.05$). The vibration stress clearly accelerated the degradation of apple quality during storage, resulting in increased ethylene production.

• 자연과학논문집
• /
• 제8권2호
• /
• pp.169-173
• /
• 1996

사과 과실의 PE필름 포장 저장 중 에틸렌을 제거하여 저장성을 증대시키기 위한 에틸렌흡착제의 사용이 과실의 저장력에 미치는 영향을 조사하고 자 본 시험을 수행하였다. 에틸렌흡착제 처리는 저장 중 경도저하가 현저하게 억제되었고 흡착제양이 많을수록 억제효과가 크게 나타나는 경향을 보였으나 과실의 당함량과 산함량에는 영향이 없었으며, 과실의 에틸렌 발생량과 호흡량이 감소되었다. 에틸렌흡착제의 처리량은 과실 10kg 당 30g 이상이 적당하였다.

• 한국자동차공학회논문집
• /
• 제10권3호
• /
• pp.93-100
• /
• 2002

For natural gas and LPG fuel, measurements on the concentrations of individual exhaust hydrocarbon species have been made as a function of air-fuel ratio in a 2-liter four-cylinder engine using a gas chromatography. NMHC in addition to the species of HC, other emissions such as CO$_2$, CO and NOx were examined for natural gas and LPG at 1800rpm far two compression ratios (8.6 and 10.6). Fuel conversion efficiencies were also investigated together with emissions to study the effect of engine parameters on the combustion performances in gas engines especially under the lean bum conditions. It was found that CO$_2$ emission decreased with smaller C value of fuel, leaner mixture strength and the higher compression ratio. HC emissions from LPG engine consisted primarily of propane (larger 60%), ethylene and propylene, while main emissions from natural gas were mothane (larger than 60%), ethane, ethylene and propane on the average. The natural gas was proved to give the less ozone formation than LPG fuel. This was accomplished by reducing the emissions of propylene, which has relatively high MIR factor, and propane that originally has large portion of LPG. In addition, natural gas shows a benefit in other emissions (i.e. NMHC,NOx, CO$_2$and CO), SR and BSR values except fuel conversion efficiency.

• Bulletin of the Korean Chemical Society
• /
• 제26권12호
• /
• pp.2069-2071
• /
• 2005

• 한국생산제조학회지
• /
• 제19권2호
• /
• pp.301-305
• /
• 2010

Cutting procedures where qualities are determined by various demand factors largely influences shipbuilding productivity. Particularly, defects in cutting shapes and cutting surface results in delay for post shipbuilding stages such as in welding and assemblage lines which could become factors for reduced economic viability of the project. Existing cutting procedures utilize fossil fuels such as propane or ethylene as the main fuel component and these methods applied particularly to ship plate cutting gives relatively slow cutting speed and generates large quantities of harmful and sometimes poisonous polluting fumes of which warrants an urgent need to look for alternative cutting methods. Recent introduction of hydrox gas generated by electrically dissociating water into hydrogen and oxygen components to be utilize as an alternative cutting fuel has resulted not just in visible improvement on cutting quality and speed over the existing methods but it has also been welcomed as an environmentally friendly clean fuel source. This paper has been prepared to serve as the basis for accommodating this environmentally friendly hydrox gas cutting method into actual working environment by observing and recording hydrox gas cutting thermal characteristics.

• 기본간호학회지
• /
• 제21권2호
• /
• pp.141-150
• /
• 2014

Purpose: This was a study on the expiration date of Ethylene Oxide (EO) gas sterilization and effects of the environmental factors of temperature, humidity and type of cabinet in sterile goods storage area on the expiration date. Methods: Sterile goods storage areas from 13 departments in one hospital were selected and 455 EO gas sterilization samples were prepared and kept in those areas over the 14 months of the study. Each sample was tested with a microbiological culture in the laboratory every week. If the result was positive, the sample was regarded as contaminated. The researcher visited once a month to check the temperature, humidity and type of cabinet. Results: With the exception of 1 sample which was positive at 56th week. 454 samples were confirmed as negative. The environment of the samples storage area was measured monthly. The annual average temperature was $24.2{\pm}1.6^{\circ}C$, and the mean relative humidity $34.7{\pm}15.2%$. The types of cabinet were 7 open and 6 closed. Conclusion: The results of the microbiological culture at 13 months showed that none of the samples were contaminated. Therefore the hospital's existing Expiration Date can be extended from 6 months to 13~14 months.

• 한국포장학회지
• /
• 제4권1호
• /
• pp.17-21
• /
• 1997

Zeolite powder used by molecular sieve, adsorbants and catalist. 1N HCl teated zeolite powders for freshness extension of fruits and vegetables showed that specific surface area was $300.29m^2/g$ largest then that of the others, and ethylene gas adsorbability was 29.07 cc/g. And then 0.5N NaCl Henting after 1N HCl treated zeolite powder showed that specific surface area and ethylene gas adsorbability was $329.43m^2/g$ and 35.64 cc/g largest then those of the others. Specific surface area of processed zeolite powder treated by high intensity magnetic seperator(HIMS) showed $369.67m^2.g$, ethylene gas adsorbability was 39.87cc/g. In this study, it could be employ 0.5N NaCl treat and HIMS methods as MA packaging materials for freshess extension of fruits and vegetables.