• Journal of the Korea Society of Computer and Information
• /
• v.19 no.1
• /
• pp.57-64
• /
• 2014

As Steiner minimum tree building belongs to NP-Complete problem domain, heuristics for the problem ask for immense amount execution time and computations in numerous inputs. In this paper, we propose an efficient mechanism of euclidean Steiner minimum tree construction for numerous inputs using combination of Delaunay triangulation and Prim's minimum spanning tree algorithm. Trees built by proposed mechanism are compared respectively with the Prim's minimum spanning tree and minimums spanning tree based Steiner minimum tree. For 30,000 input nodes, Steiner minimum tree by proposed mechanism shows about 2.1% tree length less and 138.2% execution time more than minimum spanning tree, and does about 0.013% tree length less and 18.9% execution time less than minimum spanning tree based Steiner minimum tree in experimental results. Therefore the proposed mechanism can work moderately well to many useful applications where execution time is not critical but reduction of tree length is a key factor.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.1
• /
• pp.161-169
• /
• 2012

In general, Euclidean minimum spanning tree is a tree connecting input nodes with minimum connecting cost. But the tree may not be optimal when applied to real world problems of three dimension. In this paper, three dimension Euclidean minimum spanning tree is proposed, connecting all input nodes of 3-dimensional space with minimum cost. In experiments for 30,000 input nodes with 100% space ratio, the tree produced by the proposed method can reduce 90.0% connection cost tree, compared with the tree by two dimension Prim's minimum spanning tree. In two dimension plane, the proposed tree increases 251.2% connecting cost, which is pointless in 3-dimensional real world. Therefore, the proposed method can work well for many connecting problems in real world space of three dimensions.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.5
• /
• pp.64-73
• /
• 2011

The problem of Euclidean minimum spanning tree (EMST) is to connect given nodes in a plane with minimum cost. There are many algorithms for the polynomial time problem as EMST. However, for numerous nodes, the algorithms consume an enormous amount of time to find an optimal solution. In this paper, an approximation scheme using a polynomial time approximation scheme (PTAS) algorithm with dividing and parallel processing for the problem is suggested. This scheme enables to construct a large, approximate EMST within a short duration. Although initially devised for the non-polynomial problem, we employ naive PTAS to construct a vast EMST with dynamic programming. In an experiment, the approximate EMST constructed by the proposed scheme with 15,000 input terminal nodes and 16 partition cells shows 89% and 99% saving in execution time for the serial processing and parallel processing methods, respectively. Therefore, our scheme can be applied to obtain an approximate EMST quickly for numerous input terminal nodes.

• The KIPS Transactions:PartA
• /
• v.17A no.2
• /
• pp.103-112
• /
• 2010

Cluster sensor network is a sensor network where input nodes crowd densely around some nuclei. Steiner minimum tree is a tree connecting all input nodes with introducing some additional nodes called Steiner points. This paper proposes a mechanism for efficient construction of a cluster sensor network connecting all sensor nodes and base stations using connections between nodes in each belonged cluster and between every cluster, and using repetitive constructions of approximate Steiner minimum trees. In experiments, while taking 1170.5% percentages more time to build cluster sensor network than the method of Euclidian minimum spanning tree, the proposed mechanism whose time complexity is O($N^2$) could spend only 20.3 percentages more time for building 0.1% added length network in comparison with the method of Euclidian minimum spanning tree. The mechanism could curtail the built trees' average length by maximum 3.7 percentages and by average 1.9 percentages, compared with the average length of trees built by Euclidian minimum spanning tree method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.3 no.6
• /
• pp.612-627
• /
• 2009

The high-level contribution of this paper is to illustrate the effectiveness of using graph theory tree traversal algorithms (pre-order, in-order and post-order traversals) to generate the chain of sensor nodes in the classical Power Efficient-Gathering in Sensor Information Systems (PEGASIS) data aggregation protocol for wireless sensor networks. We first construct an undirected minimum-weight spanning tree (ud-MST) on a complete sensor network graph, wherein the weight of each edge is the Euclidean distance between the constituent nodes of the edge. A Breadth-First-Search of the ud-MST, starting with the node located closest to the center of the network, is now conducted to iteratively construct a rooted directed minimum-weight spanning tree (rd-MST). The three tree traversal algorithms are then executed on the rd-MST and the node sequence resulting from each of the traversals is used as the chain of nodes for the PEGASIS protocol. Simulation studies on PEGASIS conducted for both TDMA and CDMA systems illustrate that using the chain of nodes generated from the tree traversal algorithms, the node lifetime can improve as large as by 19%-30% and at the same time, the energy loss per node can be 19%-35% lower than that obtained with the currently used distance-based greedy heuristic.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.6
• /
• pp.71-80
• /
• 2014

Employing PTAS to building minimum spanning tree for a large number of equal distribution input terminal nodes can be a effective way in execution time. But applying PTAS to building minimum spanning tree for tremendous unequal distribution node may lead to performance degradation. In this paper, a partial PTAS reflecting the scheme into specific node dense area is presented. In the environment where 90% of 50,000 input terminal nodes stand close together in specific area, approximate minimum spanning tree by our proposed scheme can show about 88.49% execution time less and 0.86%tree length less than by existing PTAS, and about 87.57%execution time less and 1.18% tree length more than by Prim's naive scheme. Therefore our scheme can go well to many useful applications where a multitude of nodes gathered around specific area should be connected efficiently as soon as possible.

• 전기의세계
• /
• v.32 no.6
• /
• pp.325-330
• /
• 1983

본 기술해설에서는 전산 기하학에서 다루는 많은 기본 문제들 중에서도 특히 평면상에 놓여있는 n개의 점들에 대한 여러문제, 예를 들면 Euclidean Minimum Spanning Tree을 구하는 문제, 점 사이의 거리가 가장 가까운 두점(two closest point pair)을 찾는 문제, Convex hull을 찾는 문제 등을 효율적으로 처리할 수 있는 Voronoi 도표 (Voronoi Diagram)라는 기본적인 structure에 대해 설명을 하고 이 Voronoi 도표가 위에서 언급한 문제를 해결하는데 이용됨을 살펴보고자 한다.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.1056-1064
• /
• 2003

The Euclidean steiner tree problem (ESTP) is to find a minimum-length euclidean interconnection of a set of points in the plane. It is well known that the solution to this problem will be the minimal spanning tree (MST) on some set steiner points, and the ESTP is NP-complete. The ESTP has received a lot of attention in the literature, and heuristic and optimal algorithms have been proposed. In real field, heuristic algorithms for ESTP are popular. A key performance measure of the algorithm for the ESTP is the reduction rate that is achieved by the difference between the objective value of the ESTP and that of the MST without steiner points. In recent survey for ESTP, the best heuristic algorithm showed around $3.14\%$ reduction in the performance measure. We present a evolution programming (EP) for ESTP based upon the Prim algorithm for the MST problem. The computational results show that the EP can generate better results than already known heuristic algorithms.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.1_2
• /
• pp.78-85
• /
• 2004

Given a set S of n points in the plane, a minimum-diameter spanning tree(MDST) for the set might have a degree up to n-1. This might cause the degradation of the network performance because the node with high degree should handle much more requests than others relatively. Thus it is important to construct a spanning tree network with small degree and diameter. This paper presents an algorithm to construct a spanning tree for S satisfying the following four conditions: (1) the degree is controled as an input, (2) the tree diameter is no more than constant times the diameter of MDST, (3) the tree is monotone (even if arbitrary point is fixed as a root of the tree) in the sense that the Euclidean distance from the root to any node on the path to any leaf node is not decreasing, and (4) there are no crossings between edges of the tree. The monotone property will play a role as an aesthetic criterion in visualizing the tree in the plane.

• Journal of information and communication convergence engineering
• /
• v.17 no.4
• /
• pp.246-254
• /
• 2019

This paper proposes a solution to the problem of finding a subgraph for a given instance of many terminals on a Euclidean plane. The subgraph is a tree, whose nodes represent the chosen terminals from the problem instance, and whose edges are line segments that connect two corresponding terminals. The tree is required to have the maximum number of nodes while the length is limited and is not sufficient to interconnect all the given terminals. The problem is shown to be NP-hard, and therefore a genetic algorithm is designed as an efficient practical approach. The method is suitable to various probable applications in layout optimization in areas such as communication network construction, industrial construction, and a variety of machine and electronics design problems. The proposed heuristic can be used as a general-purpose practical solver to reduce industrial costs by determining feasible interconnections among many types of components over different types of physical planes.