• Structural Engineering and Mechanics
• /
• 제54권6호
• /
• pp.1245-1266
• /
• 2015

In this research, the cylindrical absorber made of expanded metal sheets under impact loading has been examined. Expanded metal sheets due to their low weight, effective collapse mechanism has a high energy absorption capacity. Two types of absorbers with different cells angle were examined. First, the absorber with cell angle ${\alpha}=0$ and then the absorber with angle cell ${\alpha}=90$. Experimental Study is done by drop Hammer device and numerical investigation is done by finite element of ABAQUS software. The output of device is acceleration-time Diagram which is shown by Accelerometer that is located on the picky mass. Also the output of ABAQUS software is shown by force-displacement diagram. In this research, the numerical and experimental study of the collapse type, force-displacement diagrams and effective parameters has been investigated. Similarly, the comparison between numerical and experimental results has been observed that these results are matched well with each other. From the obtained results it was observed that the absorber with cell angle ${\alpha}=0$, have symmetric collapse and had high energy absorption capacity but the absorber with cell angle ${\alpha}=90$, had global buckling and the energy absorption value was not suitable.

• 한국광학회지
• /
• 제21권1호
• /
• pp.12-15
• /
• 2010

본 논문은 바이메탈(bi-metal)에 부착된 열확장 코어 광섬유의 높은 구부림 손실 효과를 이용한 광섬유 온도 센서를 제안 및 구현하였다. 바이메탈(bi-metal plate)의 온도 변화에 의한 변형은 열확장 코어 광섬유의 구부림 손실을 발생시킨다. 실험결과 소자의 감도와 측정범위는 열확장 코어 광섬유의 구조를 조절하여 제어 될 수 있음을 보였다. 소자의 제조공정이 상세하게 기술되었다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.737-745
• /
• 2002

The paper reviews the classification of metal transfer in GMAW and the recent developments in metal transfer control. An expanded classification which takes into account the recent developments is proposed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.483-486
• /
• 2004

Inner structured and bonded panel, or ISB Panel, as a kind of sandwich type panel, has metallic inner structures which have low relative density, because of their dimensional shape of metal between a pare of metal skin sheets or face sheets. In this work, ISB panels and inner structures formed as repeated pyramidal shapes are introduced. Pyramidal structures are formed easily with expanded metal sheet by the crimping process. Three kinds of pyramidal structures are made and used to fabricate test specimen. Through the multi-point electrical resistance welding, inner structures are bonded with skin sheet. 3-point bending tests are carried out to measure the bending stiffness of ISB panel and experimental results are discussed.

• 한국지반환경공학회 논문집
• /
• 제6권3호
• /
• pp.35-45
• /
• 2005

낙석방지울타리는 국내에서 가장 보편적으로 사용되는 낙석방지공법의 하나로 일반적으로 H형강, 와이어메쉬 및 와이어로프의 세 부분으로 구성되며 이들에 의해 발휘되는 낙석방지울타리의 총 흡수가능에너지가 낙석에너지보다 커야한다는 것을 기본적인 설계개념으로 한다. 본 연구에서는 기존 낙석방지울타리의 와이어메쉬와 와이어로프 대신, 새로운 재료인 팽창메탈을 사용한 낙석방지울타리의 성능을 평가하고 기존의 낙석방지울타리와 비교하였다. 이를 위하여 팽창메탈 낙석방지울타리와 기존 방식의 낙석방지울타리에 대하여 실내 및 현장시험을 실시하였으며, 그 결과 팽창메탈 낙석방지울타리의 흡수가능에너지는 기존 낙석방지울타리와 비교해 높은 것으로 나타나 팽창메탈은 성능 및 경제적인 면에서 기존 재료에 비해 우수한 재료임을 보였다.

• 한국정밀공학회지
• /
• 제22권9호
• /
• pp.162-172
• /
• 2005

The objective of this research works is to investigate into characteristics of bending stiffness and failure for the ISB ultra-lightweight panel with internally structured material. The expanded metal with a crimped pyramid shape and woven metal are employed as an internally structured material. Through three-points bending test, the force-displacement curve and failure shape are obtained to examine the deformation pattern, characteristic data, such as maximum load, displacement at maximum load, etc, and failure pattern of the ISB panel. In addition, the influence of design parameters fur ISB panel on the specific stiffness, the specific stiffness per unit width, failure mode and failure map has been found. Finally, it has been shown that ISB containing expand metal with the crimped pyramidal shape is prefer to that containing woven metal from the view point of optimal design for ISB panel.

• Journal of Welding and Joining
• /
• 제35권1호
• /
• pp.79-88
• /
• 2017

The effect of residual metallic sodium on the solidification cracking susceptibility of type 316FR stainless steel was investigated via transverse-Varestraint tests. And a solidification brittle temperature range (BTR) of type 316FR stainless steel was 37 K. However, the BTR expanded from 37 to 67 K, as the amount of metallic sodium at the specimen surface increased from 0 to $7.99mg/cm^2$. Microstructural observation of the weld metal suggested that metallic sodium existed in the weld metal, including in the cell boundaries, during welding solidification. Thermodynamic calculations suggested that sodium expanded the temperature range of solidliquid coexistence during welding solidification of the steel weld metal. Therefore, the increased solidification cracking susceptibility (i.e., expansion of the BTR) in the residual sodium environment was attributed to enhanced segregation of sodium during the welding solidification; this segregation, in turn, resulted in an expanded temperature range of solid-liquid coexistence.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.153-162
• /
• 2005

The structural specification of the rockfall prevention fence installed on the road section is computed according to the hypothetic rockfall energy, and the absorbable energy of the rockfall prevention fence is defined as the sum of the absorption energies of the wire rope, one of the components, the steel support and the wire netting. But the results of the field tests confirmed that the absorption energy of the rockfall prevention fence is not the sum of the energies sustainable by the components, but it is affected by the absorbable energy of part of the components. This shows there are problems with the method of computing the absorption energy of the rockfall prevention fence of the road. So in this paper, as a way of solving the problems, the effects of improving the performance through positional changes of the existing components and the effects of improving the performance through structural changes by expanded metal are checked through tests, and a plan was proposed to solve the problems with the standards of installing the conventional rockfall prevention fence.

• Environmental Engineering Research
• /
• 제25권2호
• /
• pp.258-265
• /
• 2020

Heavy metal removal by using porous mineral adsorbents bears a great potential to decontaminate sludge compost, and natural zeolite (NZ), artificial zeolite (AZ), and expanded perlite (EP) seem to be possible candidates for this purpose. A composting experiment was conducted to compare the efficiency of those adsorbents for removal of iron (Fe), manganese (Mn), chromium (Cr), copper (Cu), zinc (Zn), nickel (Ni), and lead (Pb) from sewage sludge compost with no adsorbent amendment. For this purpose, 10 g of NZ and AZ and 5 g of EP was filled in a small bag made from non-biodegradable synthetic textile and was separately mixed in composting piles. The bags were separated from compost samples at the end of the experiment. AZ and NZ exhibited different reduction potentials depending on the type of heavy metal. AZ significantly reduced Cr (43.7%), Mn (35.8%), and Fe (29.9%), while NZ more efficiently reduced Cu (24.5%), Ni (22.2%), Zn (22.1%), and Pb (21.2%). The removal efficiency of EP was smaller than both AZ and NZ. The results of this simultaneous composting and metal removing study suggest that AZ and NZ can efficiently bind metal during composting process.

• 한국안전학회지
• /
• 제19권3호
• /
• pp.57-64
• /
• 2004

This is the study for the removal of a toxic heavy metal ions and the recycling of expanded polystyrene wastes. Thus expanded polystyrene wastes collected from the packing materials of TV or chemicals and dissolved by $80wt.\%$ solvent(N, N-Dimethylacrylamide), electrospun in DC 20kV by power supply. Generally, the electrospinning is a process of manufacture to the fibers of nanosize from polymer solution. Manufactured nanofiber mats by electrospinning were sulfonated by cone.-sulphuric acid with $Ag_2S_O_4$ catalysts for the exchange capacity of heavy metal ions and the properties of structure with sulfonated time investigated by FESEM(Feild Emission Scaning Electron Microscope). The ion exchange capacity of light metal$(Na^+)$, Cd(II) and Ni(II), and by a nanofiber mats were 1.94[mmo1/g-dry-mat), 1.72(mmol/g-dry-mat), 1.24(mmol/g-dry-mat), respectively., and water uptake content showed a similar trend with IEC. and The selectivity coefficients $K^M_H$ of Cd(II), Ni((II) ions showed 0.324, 0.228. respectively.