• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1499-1504
• /
• 2004

The effects of absorbing materials on the characteristics of supersonic jet noise were experimentally investigated using a convergent-divergent nozzle with a design Mach number of 2.0. Overall sound pressure levels (OASPL) and noise spectra were obtained at far-field locations. Schlieren optical system was used to visualize the flow-fields of supersonic jets. In order to investigate the effect of absorbing materials, baffle plates of different materials (metal, grass wool and polyurethane foam) were installed at the exit of the nozzle. Experiment was carried out over a wide range of nozzle pressure ratios from 2.0 and 18.0, which corresponds to over- and under-expanded conditions. The results obtained show that the screech tone amplitude and the overall sound pressure level reduce by using the baffle plates of absorbing materials, compared with the metal baffle plate. It is also found that the characteristics of supersonic jet noise are strongly dependent on the size of baffle plate.

• Structural Engineering and Mechanics
• /
• 제50권6호
• /
• pp.817-834
• /
• 2014

An experimental program was designed in the current work to examine the structural behavior of ferrocement beams reinforced with composite materials under three point loadings up to failure. The experimental program comprised casting and testing of twelve ferrocement beams having the dimensions of 120 mm width, 200 mm depth and 1600 mm length. The twelve beams were different in the type of reinforcements; steel bars, traditional wire meshes (welded and expanded wire meshes) and composite materials (fiberglass wire meshes and polypropylene wire meshes). The flexural performances of the all tested beams in terms of strength, ductility, cracking behavior and energy absorption were investigated. Also all the tested beams were simulated using ANSYS program. The results of the experimental tests concluded that the beam with fiber glass meshes gives the lowest first crack load and ultimate load. The ferrocement beam reinforced with four layers of welded wire meshes has better structural behavior than those beams reinforced with other types of wire meshes. Also the beams reinforced with metal wire meshes give smaller cracks width in comparing with those reinforced with non-metal wire meshes. Also the Finite Element (FE) simulations gave good results comparing with the experimental results.

• 한국세라믹학회지
• /
• 제48권2호
• /
• pp.173-177
• /
• 2011

Decomposition promoting factors and decomposition mechanism in the zinc decomposition process of waste hard metals which are composed mostly of tungsten carbide and cobalt were evaluated. Zinc volatility amount was suppressed and zinc valatilization pressure was produced in the reaction graphite crucible inside an electric furnace for ZDP. Reaction was done for 2 h at $650^{\circ}C$, which 100 % decomposed the waste hard metals that were over 30 mm thick. As for the separation-decomposition of waste hard metals, zinc melted alloy formed a liquid composed of a mixture of ${\gamma}-{\beta}1$ phase from the cobalt binder layer (reaction interface). The volume of reacted zone was expanded and the waste hard metal layer was decomposed-separated horizontally from the hard metal. Zinc used in the ZDP process was almost completely removed-collected by decantation and volatilization-collection process at $1000^{\circ}C$.

• 센서학회지
• /
• 제14권3호
• /
• pp.137-143
• /
• 2005

Research in the field of biosensor has enormously increased over the recent years. The metal-oxide semiconductor field effect transistor (MOSFET) type protein sensor offers a lot of potential advantages such as small size and weight, the possibility of automatic packaging at wafer level, on-chip integration of biosensor arrays, and the label-free molecular detection. We fabricated MOSFET protein sensor and proposed the gold-black electrode as the gate metal to improve the response. The experimental results showed that the output voltage of MOSFET protein sensor was varied by concentration of albumin proteins and the gold-black gate increased the response up to maximum 13 % because it has the larger surface area than that of planar-gold gate. It means that the expanded gate allows a larger number of ligands on same area, and makes the more albumin proteins adsorbed on gate receptor.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2018년도 추계학술논문요약집
• /
• pp.379-379
• /
• 2018

MXenes are a new family of 2D transition metal carbide nanosheets analogous to graphene (Lv et al., 2017; Sun et al., 2018). Due to the easy availability, hydrophilic behavior, and tunable chemistry of MXenes, their use in applications for environmental pollution remediation such as heavy metal adsorption has recently been explored (Li et al., 2017). In this study, three-dimensional (3D) MXene ($Ti_3C_2T_x$) films with high adsorption capacity, good mechanical strength, and high selectivity for specific radionuclide from aquose solution were successfully fabricated by a polymeric precursor method using vacuum-assisted filtration. The highest removal efficiency on the films was 99.54%, 95.61%, and 82.79% for $Sr^{2+}$, $Co^{2+}$, and $Cs^+$, respectively, using a film dosage of 0.06 g/ L in the initial radionuclide solution (each radionuclide concentration = 1 mg/L and pH = 7.0). Especially, the adsorption process reached an equilibrium within 30 min. The expanded interlayer spacing of $Ti_3C_2T_x$ sheets in MXene films showed excellent radionuclide selectivity ($Cs^+$ and/or $Sr^{2+}/Co^{2+}$) (Simon, 2017). Besides, the MXene films was not only able to be easily retrieved from an aqueous solution by filtration after decontamination processes, but also to selectively separate desired target radionuclides in the solutions. Therefore, the newly developed MXene ($Ti_3C_2T_x$) films has a great potential for radionuclide removal from aqueous solution.

• 한국IT서비스학회지
• /
• 제19권6호
• /
• pp.97-117
• /
• 2020

Five years have passed since the introduction of the smart factory amid the new opportunities for growth and job creation in relation to domestic manufacturing companies. Nevertheless, there is a lack of analysis on SMEs introduction smart factories. This study empirically analyzed the effects on the introduction of smart factories of domestic metal processing SMEs by distinguishing the characteristics of enterprises In this study, 103 companies which introduced smart factories and another 106 companies which did not introduce them were sampled. The Introduction of the Smart Factory was analyzed by four categories such as the Company characteristics (R&D capability, product production capability, organizational change), entrepreneur characteristics (risk sensitivity), relational characteristics (trust, dependence, cooperation, Influence), and structural characteristics (competition). As a result of the research, we found out product production capacity, risk sensitivity, trust and cooperation, Influence, and competition are statistically significant in the introduction of smart factory. But competition was characterized by a negative (-) sign opposite to the hypothesis. This study is meaningful in that the scope of the analysis has been expanded by analyzing whether smart factory was introduced or not considering the characteristics of the company. And there should be continuous research on its utilization as well as the introduction of smart factory.

• Wind and Structures
• /
• 제35권3호
• /
• pp.213-227
• /
• 2022

The design of a building is a complex process that encompasses different fields: one of the most relevant is nowadays the energetic one, which has led to the introduction of new typologies of building envelopes. Among them, the Permeable Double Skin Façades (PDSF) are capable to reduce the solar impact and so to improve the energetic performances of the building. However, the aerodynamic characterization of a building with a PDSF is still little investigated in the current literature. The present paper proposes an experimental study to highlight the modifications induced by the outer porous façade in the aerodynamics of a building. A dedicated wind tunnel study is conducted on a rigid model of a prismatic high-rise building, where different façade configurations are tested. Specifically, the single-layer façade is compared to two PDSFs, the former realized with perforated metal and the latter with expanded metal. Outcomes of the tests allow estimating the cladding loads for all the configurations, quantifying the shielding effects ascribable to the porous layers that are translated in a significant reduction of the design pressure that could be up to 50%. Moreover, the impact of the PDSFs on the vortex shedding is investigated, suggesting the capability of the façade to suppress the generation of synchronised vortices and so mitigate the structural response of the building.

• 한국콘텐츠학회논문지
• /
• 제20권3호
• /
• pp.687-694
• /
• 2020

스티로폼은 각종 포장용기, 장난감, 부표 등 일상에서 흔히 사용되는 소재 중 하나이며, 범죄현장에서 발견 될 가능성 또한 매우 높다. 하지만 스티로폼은 구조적인 특성으로 인해 지문이 거의 남지 않아 지문 현출 기법의 효과가 크지 않다. 선행연구에 따르면 스티로폼에서의 지문 현출 방법으로 주로 분말법이나 CA 훈증법(Cyanoacrylate fuming method)을 제시하고 있다. 본 연구에서는 분말법과 MMD I의 비교 실험을 통해 MMD I의 잠재지문 현출 효과를 알아보고자 하였다. 스티로폼에 지문을 유류한 뒤 1일, 3일, 5일, 1주, 2주, 3주 경과한 검체를 분말법과 MMD I을 적용한 결과, MMD I은 지문 aging 기간에 구애받지 않고 전반적으로 매우 우수한 현출 결과를 보인 반면 분말법은 오래된 지문일수록 현출되지 않았으며 신선한 지문에서도 매우 낮은 품질의 지문이 현출되었다. MMD I은 비용과 시간이 들고, 기법이 다소 어렵다는 단점이 존재한다. 하지만 MMD I이 스티로폼 표면의 신선한 지문과 오래된 지문을 현출하는데 매우 효과적인 것으로 나타났다.

• 분석과학
• /
• 제23권3호
• /
• pp.295-303
• /
• 2010

폐수 시료를 이용한 중금속분석용 수질표준물질을 제조하여, 납, 카드뮴, 크롬, 구리, 아연, 망간, 철 등 중금속 7 종에 대해 인증분석 및 불확도 등을 평가하고, 24 개 환경측정분석기관을 대상으로 실험실간 비교실험을 실시하였다. 폐수표준물질의 인증값 및 확장불확도는 KS A ISO 가이드 35(2005)에 의해 도출하였으며, 균질성에 기인한 표준불확도는 특성값의 0.43~2.67%로 나타났다. 환경측정분석기관간 비교실험에서 모든 항목의 비교실험 결과값이 정규분포를 따랐으며, 로버스트 평균값과 폐수표준물질의 인증값과 비교한 결과, 대부분의 항목에서 로버스트 평균값이 인증값보다 낮게 나타났다.

• 해양환경안전학회지
• /
• 제19권6호
• /
• pp.681-687
• /
• 2013

본 연구에서는 240 W급 고출력 LED 집어등의 특성을 기존 메탈 집어등과 비교하여 배광 패턴의 특성 및 광효율을 분석하고, 파장 대역의 특성을 해양 투과 특성 및 시감도를 고려하여 집어등 광원으로써 적정성을 분석하였다. 색온도 6500 K, white LED 패키지를 적용한 240 W LED 집어등의 특성을 보면 배광각은 ${\pm}45^{\circ}$, 조도 변화률이 0.8로 개선되었으며, 광효율은 98.8 lm/W로 향상되었다. LED 집어등의 해수의 투과율과 인간의 암순응시 시감도를 1,500 W 메탈등 1개와 4개의 240 W LED 집어등에 적용하여 비교한 결과, 방사출력이 수심 50 m에 이르면 거의 동등하였으며, 암순응시 시감도만을 적용한 경우에도 LED 집어등이 약 5 % 정도 높은 광속을 나타내었으며, 수심 50 m의 방사출력에 암순응시 시감도를 적용한 경우 LED 집어등의 광속이 14 % 높게 나타나 메탈등의 대체 가능성을 확인할 수 있었다.