• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.513-516
• /
• 2004

Consistency in design, manufacture, installation and performance test of expansion joints is insufficient for guarantee of reliability because they are imported from various foreign countries as America, Japan and Europe. In addition to that, the regulations or codes of expansion joint should be revised and established for levels of vibration and noise generated from riding vehicles especially. Regulation on the noise neighboring traffic roads is established by ministry of environment. Therefore, Field tests on the vibration and the noise at expansion Joints, especially rail-type and finger-type joints which are typical ones in bridge with short or middle span, are performed and performance of expansion joints are analyzed. And so, the results of the investigation will be utilized as basic data for the regulation on the vibration and the noise.

• The Journal of Industrial Distribution & Business
• /
• v.8 no.1
• /
• pp.15-22
• /
• 2017

Purpose - Retail companies are turning from one type of retailer to multiple business categories through various reasons, such as taking advantage of existed types of retailers' channel distribution, information and know-how, and entering into new types of retailers. However, there is few research conducted about multiple type of retailers. Research design, data, and methodology - In this research, the references, data and new stores on E-mart will be collected. The dissertation, annual report, statistical data, land-book of E-mart will be also collected to confirm whether E-mart has made any acquisition towards another company. Results - There is a tendency to new stores expansion, store enlargement and prolonging the opening preparation of new stores, based on the core of new stores expansion of E-mart as a general supermarket type of retailers. Based on general supermarket type of retailers, E-mart begins to diversify its retail company's type of retailers. Conclusions - As a general supermarket which is the most important type of retailers, E-mart is expanding into SSM type of retailers to seek new power of growth while slowdown growth is shown in general supermarket type of retailers. The expansion into SSM type of retailers would be a wise option as a retail company, E-mart is able to keep growing in the future.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.4
• /
• pp.608-621
• /
• 1993

The Purposes of this study were 1)to find the body surface total line and segment line significantly(${\alpha}$=0.05) changed by the leg movement including all movement direction of hip joint, knee joint and ankle joint for the more functional clothing. 2)to classify them into 3 types-expansion type, contraction type, expansion & contraction type, and 3)to identify the characteristics of the body surface length changes. 10 Crosswise and 5 lengthwise body surface total lines and 48 crosswise & 39 lengthwise body surface segment lines of 26 female college students aged from 18 to 24 years were measured directly on the body surface and were analyzed by ANOVA & Multiple Comparison Test (Tukey). The results were as following : Body surface total lines significantly changed were all the body surface total lines except abdoman girth, 1/2thigh girth of lower leg and ankle girth, and these were classified into 3 types : Center front leg line belonged to expansion & contraction type, whereas lateral leg line, legscye girth, and total crotch length belonged to contraction type. The rest belonged to expansion type. Knee girth showed maximum expansion, whereas center front leg line showed maximum contraction. Body surface total lines have shown large expansion crosswise whereas lengthwise they have mainly shown contraction. At least more than one component segment line of each body surface total lines except abdoman girth and ankle girth have shown significant change. Top segment of inner leg line showed maximum expansion. whereas just below top segment of center front leg line showed maximum contraction. Crosswise all the body surface segment lines have shown expansion except inner back segments of thigh girth and 1/2thigh girth of upper leg which have shown contraction. Lengthwise they have shown both expansion and contraction according to the location of front or back, and below or upper 1/2thigh girth line except the component segment lines of lateral leg line, which has shown contraction only.(cf. figure 2. figure 3. and table 2-2).

• Journal of Power System Engineering
• /
• v.2 no.3
• /
• pp.34-40
• /
• 1998

Performance characteristics of a refrigeration systems with various expansion valves and superheat changes were investigated experimentally. Experimental data have been taken utilizing three different devices; a thermostatic expansion valve, a linear type electronic expansion valve and a solenoid type electronic expansion valve. The data taken from tile three types of expansion valves were discussed with the temperature distribution of each zone in the evaporator and the superheat changes of the evaporator outlet In each zone temperature distribution fluctuated larger with the thermostatic expansion valve than with the electronic expansion valves. The optimum superheat ranged from $5^{\circ}C\;to\;15^{\circ}C$, and the superheat with the thermostatic expansion valve showed hunting phenomenon, which affected the evaporating and condensing temperature.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.2
• /
• pp.163-171
• /
• 2006

In order to control multi-zone temperatures, a multi-type air-conditioning system may be used. In this study, control algorithms for the compressor and the electronic expansion valve of a multi-type air-conditioning system were developed by using fuzzy logics. The compressor control algorithm was composed of a compressor pressure setpoint algorithm, a compressor pressure setpoint reset algorithm, and a compressor frequency setpoint algorithm. The electronic expansion valve control algorithm was composed of an indoor temperature control algorithm, and a superheat control algorithm. These algorithms were applied to a multi-type air-conditioning system. Test showed good results for the control of a multi-type air-conditioning system.

• Journal of the Korean housing association
• /
• v.18 no.3
• /
• pp.41-49
• /
• 2007

The purpose of this study was to investigate the using behavior of the balcony space in apartment housing for improving apartment balcony as dwelling space. For that, it is needed to identify the practical meaning of balcony space as function so balcony expansion and the using behavior of balcony space were investigated and analyzed. For this study, survey and depth-interview methods were used for data collection. The major findings were as followings: 1) Balcony expansion mainly occurred in balcony of livingroom and bedroom. Balcony expansion showed several phases according to the type of plan and function of balcony space and few residents chose expansion of all balconies. 2) The using behavior of balcony space was categorized by these various functions of balconies. It was also related to unit-plan type of apartment housing. These results can provide improvement guidelines for the balcony with the differentiation of design factors for residents.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.4
• /
• pp.196-203
• /
• 2003

This study was performed to design the optimal block type expansion valve through analyzing the characteristics of the block type expansion valve in automotive air conditioning system using HFC-134a. Because an alternative refrigerant (HFC-l34a) is being used instead of CFC-12 for automotive air conditioning system, newly designed air conditioning components are necessary due to changes in characteristics. The performance tests were accomplished through the test bench, that is manufactured based on the study. And then it was carried out to measure the variation of temperature and pressure at each part of the air conditioning system according to the compressor speed.

• Journal of the Korean Institute of Rural Architecture
• /
• v.20 no.2
• /
• pp.11-18
• /
• 2018

The purpose of this study is to analyze the structure and use change of the private space according to the balcony expansion and use it as the data of plan design. According to Bay, front length/width ratio and the change of balcony space before and after expansion of space organization of house units were analyzed. Common characteristics of Flat type and Tower type are an increase of the frontage length of house units in an apartment, an increase of the number of front bay, and an increase of integrated LDK focusing on living room. A difference is that Flat type shows high frontage ratio, Bay figure, and spatial arrangement favorable to front openness and lighting. Flat type shows higher area distribution than Tower type in LDK area distribution located in at the plane center. Spatial expandability and visual openness of Flat type are more beneficial than those of Tower type in the planning, and a balcony extension of house units has developed to direction to open more. Tower type creates various block images through a combination of house units focusing on the core. Uses after balcony expansion are area expansion of a balcony-neighboring room, storage space, expansion and function improvement of the variable range, and specialized space different from a neighboring room. In addition, there is no escapable space except for a shelter, so unit plan should be prepared to prevent using it other space of a shelter and to solve moving line of two-way horizontal refuge and vertical refuge.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.5
• /
• pp.827-833
• /
• 2022

In this study, the prediction of the bending angle for the 350 A bellows-type expansion joints and the structural stability according to the load were determined. The stability of the 2km piping system was predicted by applying the allowable bending angle of the expansion pipe joint obtained from the analysis. The maximum bending angle was calculated through bending analysis of the bellows-type expansion joints, and the maximum bending angle by numerical calculation was about 1.8°, and the maximum bending angle of the bellows obtained by comparing the allowable strength of the material was about 0. 22°. This angle was very stable compared to the allowable bending angle (3°) of the expansion pipe joint regulation. By applying the maximum bending angle, the allowable maximum deflection of the 2 km pipe was about 3.8 m. When the seismic load was considered using regression analysis, the maximum deflection of the 2km pipe was about 142.3mm, and it was confirmed that the bellows-type expansion joints and the deflection were stable compared to the allowable maximum deflection of the pipe system. These research results are expected to present design and analysis guidelines for the construction of piping and the development of bellows systems, and to be used as basic data for systematic research.

• Communications of the Korean Mathematical Society
• /
• v.24 no.2
• /
• pp.281-290
• /
• 2009

The famous Guo-Krasnosel'skii fixed point theorems concerning cone expansion and compression of norm type and order type are extended, respectively. As an application, the existence of multiple positive solutions for systems of Hammerstein type integral equations is considered.