• Journal of the Korea Society of Computer and Information
• /
• v.27 no.12
• /
• pp.1-8
• /
• 2022

As an efficient file system for SSD(Solid State Drive), F2FS is employed in the kernel of Linux operating system. F2FS applies various methods to improve performance by reflecting the characteristics of flash memory. One of them is improvement of the index structure that contains addresses of data blocks for each file. This paper presents a method for further improving performance by modifying the index structure of F2FS. F2FS manages all index blocks as logical numbers, and an address mapping table is used to find the physical block addresses of index blocks on flash memory. This paper shows performance improvement by applying logical numbers to the last level index blocks only. The count of mapping table search for a data block access is reduced to 1~2 from 1~4.

• Defense and Technology
• /
• no.5 s.231
• /
• pp.26-33
• /
• 1998

현재 개발이 완료되고 비행시험이 진행중인 FS-X의 개발기간중, FS-X의 운용요구라면 기존의 미국 전투기인 F-15, F-16 또는 F/A-18을 재설계하거나 개조하면 충분히 만족할 수 있고 적은 비용으로 획득할 수 있다는 미국의 주장에 대항한 일본의 대응책과 기술개발력 육성의 문제를 일본의 안전보장이라는 관점에서 정리함으로써 향후 한국의 항공산업 발전에 참고가 되었으면 한다.

• Defense and Technology
• /
• no.4 s.230
• /
• pp.22-29
• /
• 1998

현재 개발이 완료되고 비행시험이 진행중인 FS-X의 개발기간중 FS-X의 운용요구라면 기존의 미국 전투기인 F-15, F-16 또는 F/A-18을 재설계하거나 개조하면 충분히 만족할 수 있고 적은 비용으로 획득할 수 있다는 미국의 주장에 대항한 일본의 대응책과 기술개발력 육성의 문제를 일본의 안전보장이라는 관점에서 정리함으로써 향후 한국의 항공산업 발전에 참고가 되었으면 한다

• Applied Chemistry for Engineering
• /
• v.9 no.3
• /
• pp.457-461
• /
• 1998

The vesicle system of DPPC(dipalmitoylphosphaticylcholine)/Chol(Cholesterol) has been modified by incorporating various mole fractions of flourinated surfactant($C_8F_{17}(CH_2)_2OCO-CH_2CH(SO_3Na)COO(CH_2)_2C_8F_{17}$. Sodium bis(1H,1H,2H,2H-heptadecaflurododecyl)-2-sulfosuccinate, FS)/fluorinated fatty acid salt ($C_7F_{15}COONH_4$, ammoniumpentadecaflurooctyrate, FFS), and their physicochemical properties have been investigated in an attempt to enhance the stability of phospholipid vesicle system. The ${\zeta}$-potential measurement by use of Zetamaster sub-micron Particle Electrophoresis Analyzer (Malvern Co.) showed that a charged homogeneous DPPC/Chol/FS vesicle has been formed owing to the incorporated FFS effect on the membrane, playing a role as a cosurfactant in the bilayer between DPPC and FS components. With increase in the concentration of FFS, it was found that the particle size and also surface charge of the DPPC/Chol/FS vesicle decreased. The stability of DPPC/Chol/FS/FFS liposome was found to be enhanced significantly compared to that of DPPC/Chol/FS according to the dispersity change as a function of time. The release rate of dye molecule of Methylene Blue from the DPPC/Chol/FS/FFS vesicle was determined to be slower than that of DPPC/Chol/FS system, and it may be attributed to the increase in microviscosity of the hydrophobic region in the bilayer. The affinfinity of DPPC/Chol/FS/FFS vesicles to albumin was found to be slightly lowered compared to that of DPPC/Chol/FS. Based on these findings, it was confirmed that a more stable and homogeneous vesicle system of DPPC/Chol/FS could be prepared by addition of FFS, acting as a cosurfactant in the aggregate formation.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.398-404
• /
• 2003

Most previous researches for the hybrid composite materials such as FRMLs(Al/AFRP, Al/GFRP) have evaluated the fatigue delamination behavior using the traditional fracture mechanism. However, most previous researches have not generally been firmed yet. Because delamination growth behavior in hybrid composite should be consider delamination growth rate, $dA_D$/da using the delamination shape factors, fs instead of traditional fracture mechanic parameters. The major purpose of this study was to evaluate the relationship between delamination shape factor, fs and delamination growth rate, $dA_D$ . And a propose parameter on the delamination aspect ratio, b/a. The details of the study are as follow : 1) Relationship between crack length, a and delamination width,b. 2) Relationship between delamination aspect ration, b/a and delamination area rate,($(A_D)_{N}(A_D)_{ALL}$. 3) Variation of delamination growth rate, $dA_D/da$ was attendant on delamination shape factors, $fs_1$, $fs_2$, $fs_3$. The test results indicated the delamination growth rate depends on delamination shape factors.

• Korean Journal of Agricultural Science
• /
• v.22 no.2
• /
• pp.163-169
• /
• 1995

This study was carried out to examine the genetic constitution of serum proteins and enzymes in Holstein Friesian cattle population. The genetic variants of post-transferrin-2(pTf-2), transferrin(Tf), post-albumin(pAlb), ceruloplasmin(Cp) and amylase-I(Am-I) were analyzed by using PAGE(polyacrylamide gel electrophoresis) and STAGE(starch gel electrophoresis). In serum proteins, the pTf-2 locus were observed to be controlled by codominant alleles designated F and S, and the distribution of genotypes were 76.34, 14.50 and 9.10% for pTf-2 FF, FS and SS types, respectively. The gene frequencies of the pTf-2 F and S allele were 0.836 and 0.164. The Tf locus were found to be controlled by four alleles, Tf A, D1, D2 and E at a single locus, and the distribution of genotypes were 6.11, 32.06, 19.08, 1.53, 10.69, 18.32, 9.92 and 2.29% for Tf AA, AD1, AD2, AE, D1D1, D1D2, D2D2 and D2E type, respectively. The gene frequencies of the Tf A, D1, D2 and E wee 0.321, 0.359, 0.298 and 0.019. The pAlb locus were identified to be genetically controlled by two alleles, pAlb F and S allele, and the distribution of genotypes were 32.06, 29.77 and 38.17% for pAlb FF, FS and SS types, respectively. The gene frequencies of the pAlb F and S allele were 0.461 and 0.531. The Alb locus were observed to be controlled by Alb A and B allele, and the gene frequencies of these were 0.996 and 0.004. In serum enzymes, the Cp locus were found to be controlled by F and S allele, and the distribution of genotypes were 46.57, 27.48 and 25.95% for Cp FF, FS and SS types, respectively. The gene frequencies of F and S allele were 0.603 and 0.394. The Am-I locus were observed to be controlled by Am-I B and C allele, and the distribution of genotypes were 39.69, 21.73 and 38.93% for Am-I BB, BC and CC types, the gene frequencies of Am-I B and C were 0.503 and 0.497, respectively.

• Computers and Concrete
• /
• v.19 no.2
• /
• pp.153-159
• /
• 2017

In this study, the strength properties of alkali-activated silica fume (SF) mortars were investigated. The crushed limestone sand with maximum size of 0-5 mm and the sodium meta silicate ($Na_2SiO_3$) used to activate the binders were kept constant in the mortar mixtures. The mortar specimens using the replacement ratios of 0, 25, 50, 75 and 100% SF by weight of cement together with $Na_2SiO_3$ at a constant rate were produced in addition to the control mortar produced by only cement. Moreover, the mortar specimens using the replacement ratio of 4% titanium dioxide ($TiO_2$) by weight of cement in the same mixture proportions were produced. The prismatic specimens produced from eleven different mixtures were de-moulded after a day, and the wet or dry cure was applied on the produced specimens at laboratory condition until the specimens were used for flexural strength ($f_{fs}$) and compressive strength ($f_c$) measurement at the ages of 7, 28 and 56 days. The $f_{fs}$ and $f_c$ values of mortars applied the wet or dry cure were compared with the results of control mortar. The findings revealed that the $f_c$ results of the alkali activated 50% SF mortars were higher than that of mortar produced with Portland cement only. It was found that the $f_{fs}$ and $f_c$ of alkali-activated SF mortars cured in dry condition was averagely 4% lower than that of alkali-activated SF mortars cured in wet condition.

• Journal of the Korea Concrete Institute
• /
• v.16 no.3 s.81
• /
• pp.407-414
• /
• 2004

The purpose of this study is to evaluate the ability to resist chloride ions penetration of the concrete structure under marine environment in south-east asia especially. In this study, high strength concrete(HSC) with various combination of ordinary portland cement(OPC), blast-furnace slag(SG) and silica fume(SF) are cured 23 and $35^{\circ}C$ considering the site weather, and are cured in water for 3, 7 or 56 days respectively. And to investigate the fundamental properties and the resistance of chloride penetration of various HSC, setting time, slump flow, compressive strength, void and ASTM C 1202 test were conducted. Test results show that the compressive strength of HSC is similar regardless of SG replacement ratio and total charge passed of chloride is the smallest at 40% replacement of SG. The compressive strength of G4FS HSC is, besides, outstandingly high at early age compare with other HSC, but the compressive strength of G4F HSC, which is vary according to curing temperature and condition, most high at the age after 7 days. Total passed charge of HSC get larger in the order G4FS

• Journal of the korean academy of Pediatric Dentistry
• /
• v.47 no.4
• /
• pp.397-405
• /
• 2020

The aim of this study is to compare cariogenic characteristics of fluoride-sensitive Streptococcus mutans [fluoride-sensitive (FS) S. mutans ] and fluoride-resistant Streptococcus mutans [fluoride-resistant (FR) S. mutans] in the presence of sucrose, and to evaluate its effect on cariogenic biofilm formation. S. mutans ATCC 25175 was continuously cultured in trypticase soy broth (TSB) containing NaF (70 ppm) for 40 days to generate FR S. mutans. FS and FR S. mutans were inoculated in TSB with or without 2% sucrose, and optical density and pH were measured every hour. An oral biofilm was formed using saliva bacteria and analyzed through confocal laser scanning microscopy and CFU count. Finally, the expression of glucosyltransferases genes of both S. mutans was investigated through RT-PCR. FR S. mutans exhibited slower growth and lower acidogenicity in the presence of sucrose compared to FS S. mutans . Both cariogenic and single species biofilm formation was lower in the presence of FR S. mutans, along with reduced number of bacteria. FR S. mutans showed significantly low levels of gtfB, gtfC, and gtfD expression compared to FS S. mutans . On the basis of results, FR S. mutans may be less virulent in the induction of dental caries.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.4
• /
• pp.515-523
• /
• 2012

The study investigated the biochemical methane potential (BMP) assay of cellulose supplementing with mixed methanogens and cellulolytic bacteria to improve anaerobic digestion for methane production. For the BMP assay, 7 different microbial supplementation groups were consisted of the cultures of mixed methanogens (M), Fibrobacter succinogenes (FS), Ruminococcus flavefaciensn (RF), R. albus (RA), RA+FS and M+RA+FS including control. The cultures were added in the batch reactors with the increasing dose levels of 1% (0.5 mL), 3% (1.5 mL) and 5% (2.5 mL). Incubation for the BMP assay was carried out for 40 days at $38^{\circ}C$ and anaerobic digestate obtained from an anaerobic digester with pig slurry as inoculum was used. In results, 5% FS increased total biogas and methane production up to 10.4~22.7% and 17.4~27.5%, respectively, compared to other groups (p<0.05). Total solid (TS) digestion efficiency showed a similar trend to the total biogas and methane productions. Generally the TS digestion efficiency of the FS group was higher than that of other groups showing at the highest value of 64.2% in the 5% FS group. Volatile solid (VS) digestion efficiencies of 68.4 and 71.0% in the 5% FS and the 5% RF were higher than other groups. After incubation, pH values in all treatment groups were over 6.4 indicating that methanogensis was not inhibited during the incubation. In conclusion, the results indicated that the hydrolysis stage for methane production in anaerobic batch reactors was the late-limiting stage compared with the methanogenesis stage, and especially, as the supplementation levels of F. succinogenes supplementation increased, the methane production was increased in the BMP assay compared with other microbial culture addition.