• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.1049-1053
• /
• 2002

An unconstrained tuning fork with a 3-D model has been numerically analyzed by Finite Element Method (FEM) and Boundary Element Method (BEM). The first three natural frequencies were calculated by the FEM modal analysis. Then the change of the modal frequencies was examined with the variation of the tuning fork length and width. Analytical model equations were derived from the numerically relating results of the modal frequency-tuning fork length by approximating minimization. Finally the BEM was used for the sound pressure field calculation from the structural displacement data.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.353-358
• /
• 1998

In general, we have used the finite element method(FEM) to find natural frequencies of plates. In this method, however, it is necessary to use a large amount of computer memory and computation time because the FEM requires many degrees of freedom for finding natural frequencies of plates correctly. Therefore it was very difficult to analyze the free vibration of plates correctly on personal computer. For overcoming this disadvantage of the FEM, the authors have developed the finite element-transfer stiffness coefficient method(FE-TSCM) which is based on the concept of modeling techniques in the FEM and the transfer of the stiffness coefficient in the transfer stiffness coefficient method. In this paper, we formulate free vibration analysis algorithm of rectangular plates using the FE-TSCM. Some numerical examples of rectangular plates are proposed, and their results and computation times obtained by the FE-TSCM are compared with those by the FEM and the finite element-transfer matrix method in order to demonstrate the accuracy and efficiency of the FE-TSCM.

• Information and Communications Magazine
• /
• v.28 no.11
• /
• pp.16-23
• /
• 2011

휴대폰은 스마트화되면서 퍼스널 컴퓨터에 버금가는 성능으로 발전하고 있다. 또한 모바일 환경에서 높은 데이터 전송 속도 및 많은 사용자가 동시에 사용할 수 있는 시스템을 적용하고 있다. 차세대 이동통신서비스나 B4G(Beyond 4 Generation)에서는 다중밴드/다중 모드/다중경로 처리구조의 융합 단말기가 시장을 형성하게 되며, 갈수록 휴대폰의 RF Front-End는 복잡하게 된다. 또한 FEM(Front End Module)의 성능은 단말기 시스템의 품질(QoS, Quality of Services)을 좌우하는 핵심부품으로 High Data Rate를 위하여 고성능화가 요구되고 있다. 본고에서는 FEM의 발전 트랜드와 구성하는 블록도 및 주요 핵심부품의 특성과 모듈의 소형화 패키징 기술에 관하여 제시하였다. 또한 4G LTE와 Wimax듀얼밴드 Tx/Rx통합 FEM을 소개하였고, 향후에 구성되게 되는 Future FEM의 블록도를 제시하였다.

• Proceedings of the KWS Conference
• /
• 2006.10a
• /
• pp.45-47
• /
• 2006

Lightweight design, safety, vibration, energy absorption capability can no longer achieve without adhesive bond joint. Base on those concepts and cost reduction, adhesive bond FEM model development has been done. The FEM analysis and experiments were conducted in this study. Crash condition is 143 Kg Hammer weight and unit meter Height. and then These test results were used to develop resonable FEM model. To estimate which FEM model is resonable, compare hybrid joint specimen experiment results with FEM analysis results. Conclusively this study achieves optimization bonding model related crash and adhesive bond jointed hat profile crash characters.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2010.05a
• /
• pp.87-88
• /
• 2010

A permeability of concrete is a very important factors evaluating durability. So, we are carrying out a lot of relational data bases and experiment regarding a permeability. In order to evaluate a permeability of concrete, we are proceeding study on the water penetration and diffusion in concrete by water pressure. Because a way to evaluate a permeability of concrete has a limit. We will present a good method of evaluating durability of concrete using the water penetration depth of concrete by water pressure. To carry this out, we executed experiment with penetration depth of concrete by water pressure and verified it though FEM analysis.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.5
• /
• pp.245-249
• /
• 2006

This study tries to test and analyze the static friction torque generated by an electromagnetic clutch. Then the torque is improved by optimizing the shape of armature. For the purpose of design change and optimization of the electromagnetic clutch, the static friction torque prediction is very important. We construct an axi symmetric FEM model for analyzing the static friction torque and used a torque tester for evaluating the real torque. For a test, predicted static friction torque is compared with the experimental one to discuss the rationality of torque analysis process. The analytical result agrees well with experimental data, explaining the validity of the mathematical process and FEM model. After confirming the torque analysis process, the optimization process is investigated. The optimization result shows that the static torque is improved by changing the armature shape.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2568-2570
• /
• 2004

CEMTool is a command style design and analyzing package for scientific and technological algorithm and a matrix based computation language. In this paper, we present new FEM (Finite Element Method) package in CEMTool environment. In contrast to the existing MATLAB PDE Toolbox, our proposed FEM package can deal with the combination of the reserved words. Also, we can control the mesh in a very effective way With the introduction of new mesh generation algorithm and NDM (Hosted Dissection Method), our FEM package can guarantee the shorter computational time than MATLAB PDE Toolbox. In addition, using the advanced electromagnetics library of CEMTool FEM package, we can analyze the practical problems such as the motor field analysis. Consequently, with our new FEM package, we can overcome some disadvantages of the existing MATLAB PDE Toolbox.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.6
• /
• pp.63-70
• /
• 2008

Conical horn is used in many high frequency ultrasonic horns, to achieve a longitudinal vibration mode across a wide ultrasonic tool horn output surface. Modal analysis is method for designing tuned ultrasonic tool horn and for the prediction natural frequency of ultrasonic tool horn vibration mode. The design of ultrasonic horn is based on prototype estimate obtained by FEM analysis. The FEM simulated ultrasonic tool horn is built and characterized experimentally through laser vibrometer and electrical impedance analysis. In this paper, FEM analysis is developed to predict the natural frequency of ultrasonic tool horn and use of in the optimal design of ultrasonic horn shape.

• Structural Engineering and Mechanics
• /
• v.51 no.2
• /
• pp.229-248
• /
• 2014

In this paper, the development of a new optimization software for finite element model updating of engineering structures titled as FemUP is described. The program is used for computational FEM model updating of structures depending on modal testing results. This paper deals with the FE model updating procedure carried out in FemUP. The theoretical exposition on FE model updating and optimization techniques is presented. The related issues including the objective function, constraint function, different residuals and possible parameters for FE model updating are investigated. The issues of updating process adopted in FemUP are discussed. The ideas of optimization to be used in FE model updating application are explained. The algorithm of Sequential Quadratic Programming (SQP) is explored which will be used to solve the optimization problem. The possibilities of the program are demonstrated with a three dimensional steel frame model. As a result of this study, it can be said that SQP algorithm is very effective in model updating procedure.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.373-380
• /
• 2006

Accurate and fast haptic simulations of deformable objects are desired in many applications such as medical virtual reality. In haptic interactions with a coarse model, the number of nodes near the haptic interaction region is too few to generate detailed deformation. Thus, local refinement techniques need to be developed. Many approaches have employed purely geometric subdivision schemes, but they are not proper in describing the deformation behavior of deformable objects. This paper presents a continuum mechanics-based finite element adaptive method to perform haptic interaction 'with a deformable object. This method superimposes a local fine mesh upon a global coarse model, which consists of the entire deformable object. The local mesh and the global mesh are coupled by the s-version finite element method (s-FEM), which is generally used to enhance accurate solutions near the target points even more. The s-FEM can demonstrate a reliable deformation to users in real-time.