• Korean Journal of Optics and Photonics
• /
• v.12 no.5
• /
• pp.406-413
• /
• 2001

We report theoretical and experimental results for the wavelength and polarization selectivity of a fiber-to-planar waveguide coupler made of a side polished single mode fiber covered with a planer waveguide incorporating a thin metal film. A simple but exact approach to obtain the modal properties of multilayer planar waveguide with a thin metal film is described. The device was modeled into equivalent 1 dimensional structure and its behaviour was analyzed based on coupled mode theory. The effects of metal film thickness and refractive index of superstrate on the device properties were measured and explained.

• Journal of Plant Biology
• /
• v.38 no.4
• /
• pp.337-341
• /
• 1995

Hairy roots of Korean ballon flower (Platycodon grandiflorum A. DC) were induced from the root tissues infected with Agrobacterium rhizogenes ATCC 15834. Growth and polyacetylene [lobetyol (1), lobetyolin (2) and lobetyolinin (3)] production fo ten hairy root clones cultured in 1/4 Gamborg B5 (B5) liquid medium were determined. One selected hairy root clone (D6) grew well in hormone free-B5 liquid medium and showed maximum content of polyacetylenes at week 6 for 1 (0.375% dry wt) and at week 7 for 2 and 3 (3.030% and 0.206% dry wt, respectively) whose levels were much higher than those of the intact plant root (1:0.019%, 2:0.077% dry wt, 3 was not detected).

• Korean Journal of Optics and Photonics
• /
• v.13 no.1
• /
• pp.58-64
• /
• 2002

Using Mach-Zehnder type intensity modulator, we stabilized a 10 GHz harmonically mode-locked dispersion-compensated fiber ring laser using a feedback controlling system, and we measured its stability. The laser was stabilized for more than 16 hours by controlling the cavity length to suppress the relaxation oscillation frequency component which had caused the laser output instability. The ms timing jitter and ms amplitude noise were measured to be 260-524 fsec and 4~11.5%, respectively, and BER test measurement showed a value of 10$^{-13}$ .

• Korean Journal of Optics and Photonics
• /
• v.12 no.6
• /
• pp.463-467
• /
• 2001

In this study, we developed a FFPI (fiber optic Fabry-Perot interferometer) pressure sensor using the Si diaphragm which measures pressure in vivo. The diaphragm and its supporting structure were etched in KOH solution and were fabricated with micromachining technology. For the configuration of the sensor, the length of the cavity of the Fabry-Perot etalon is 15 mm and one end of the etalon was bonded to a Si diaphragm with 507m thickness. When the area of the Si diaphragm was 2$\times$2 mm2 (cavity length 15 mm), it turns out that the pressure sensitivity was about 1.5 degree/kPa. The pressure sensor developed in this study showed that the phase change was linearly proportional to the increasing pressure in the range of 80 kPa.

• Korean Journal of Optics and Photonics
• /
• v.12 no.5
• /
• pp.389-393
• /
• 2001

A wavemeter is realized using the fact that the coupling coefficient of a WDM coupler is a function of wavelength. Prototype devices with 1500 nm/1600 nm and 1510 nm/1550 nm WDM couplers are successfully fabricated and tested in the laboratory. The measurement resolutions are $\pm$0.27 nm over a wavelength range of 1515 nm~1576 nm for the device with 1500 nm/1600 nm WDM coupler and $\pm$0.103 nm over a wavelength range of 1520 nm~1543 nm for th4e device with 1510 nm/1550 nm WDM coupler. The dependence of operating characteristics on the input signal power is insignificant. However the temperature dependence is ~0.06 nm/$^{\circ}C$.

• Korean Journal of Optics and Photonics
• /
• v.12 no.5
• /
• pp.371-375
• /
• 2001

We have implemented a sensor head which consists of erbium doped fiber pumped by 1480 nm LD and single fiber Bragg grating for simultaneous measurement of strain and temperature. The measurement precision and speed are improved by using Mach-Zehnder interferometer instead of optical spectrum analyzer (OSA) as a demodulator. The measurement precision of temperature measured by the amplitude variation of output signal is 0.05$^{\circ}C$ and that of strain measured by the phase variation of output signal is 0.1$\mu$strain. The measurement precision of temperature and strain are improved nearly 140 times and 700 times, respectively, compared to those using an OSA with wavelength resolution of 0.97 nm as d demodulator.