• Korean Journal of Soil Science and Fertilizer
• /
• v.23 no.1
• /
• pp.15-20
• /
• 1990

A laboratory experiment was conducted to investigate the relationship between the composition of phosphorus forms and soil chemical properties. The soil samples were collected from the farms of the 149 locations where vegetables were intensively cultivated with heavy application of phosphorus. The composition percentages of Ca-P and Saloid-P to the total phosphorus were increased as increasing soil pH while those of Fe-P and Al-P were decreased, The composition percentage of Fe-P were increased up to pH 5.0-6.0 and decreased as increasing pH above 6.0. respectively. The pH dependency of Al-P and Fe-P composition percentage was more remarkable for the soils with high available phosphorus (>500ppm) than with low available phosphorus (<500ppm). Composition percentages were in order of Fe-P>Al-P>Ca-P>Saloid-P for the soils with available phosphorus below 500ppm, while those were in order of Al-P>Fe-P>Ca-P>Saloid-P for the soils with high available phosphorus above 1,000ppm. Composition percentages of Al-P and Fe-P were increased as increasing active Al content, and Fe-P was increased as increasing of active Fe and P sorbed but saloid-P, Al-P and Ca-P were decreased.

• Journal of the East Asian Society of Dietary Life
• /
• v.4 no.2
• /
• pp.9-16
• /
• 1994

This study was undertaken to investigate the effects of dietary low (Fe) levels on Fe metabolism of cadmium(Cd) poisoned rats. 40 male Sprague weaning Dawley rats weighing 80-90g were divided into 4 groups(LFe:low Fe, LFeCd:low Fe and Cd, AFe: adequate Fe, AFeCd: adequate Fe and Cd) according to Cd administration(0, 50ppm in drinking water) and Fe levels(Fe:6ppm, 40ppm in diet)for 12 weeks. The food intake and body weight gain of Cd group with low Fe(LFeCd) were significantly lower than those of without Cd group with adequate Fe(AFe)(p<0.01, P<0.05). But there was no significantly difference between Cd groups and without Cd groups in water intake. The blood levels of hemoglobin, hematocrit, and serum levels of Fe of LFeCd were significantly lower than those of AFe(p<0.01, p<0.05, p<0.001). The urinary and fecal excretion of Fe of LFeCd was significantly lower than that of AFe(p<0.05, p0.05). The levels of Fe of liver, spleen in LFeCd were lower than those of AFeCd(p<0.05, p<0.05). These results indicates that adequate iron supplementation to Cd pretreated rats induce protective effects on the reduction of Fe status by Cd poisoning.

• Korean Journal of Microbiology
• /
• v.52 no.2
• /
• pp.230-235
• /
• 2016

This study was carried out to analyze the differences in enzyme activity and stability between the native Fe superoxide dismutase (FeSOD) and the 6xHis-tagged superoxide dismutase (6xHis-FeSOD) of Streptomyces subrutilus P5. The optimum pHs for both native FeSOD and 6xHis-FeSOD were 7, while the pH range of the activity was narrower for the 6xHis-FeSOD. The native FeSOD was stable at pH 4-9, but the 6xHis-FeSOD lost its stability at pH > 9. The temperatures of the optimum activities were same for both types of enzymes. However, the heat stability of the 6xHis-FeSOD was clearly decreased; even at $20^{\circ}C$ the enzyme lost the activity after 360 min. In contrast, the native FeSOD was stable after 720 min at below $40^{\circ}C$. $H_2O_2$ inhibition was occurred already at 0.5 mM for the 6xHis-tagged enzyme. Therefore, from the results that the 6xHis-FeSOD retained the enzyme activity at pH 6-7 and $20-40^{\circ}C$, it can be assumed that the protein structure became destabilized under different storage conditions and sensitive to the enzyme inhibitor.

• Journal of IKEEE
• /
• v.26 no.4
• /
• pp.705-709
• /
• 2022

The effect of the annealing temperature of the poly(vinylidene fluoride-trifluoroethylene)(P(VDF-TrFE)) solid electrolyte layer on the electrical properties of the P(VDF-TrFE)-based memristor was analyzed. In morphological analyses, the P(VDF-TrFE) thin film with 200℃ annealing temperature (200P(VDF-TrFE)) was shown to have surface roughness ≈5 times larger and thickness ≈20% smaller than that with 100℃ annealing temperature (100P(VDF-TrFE)). Compared to the 100P(VDF-TrFE) memristor (M100), the set voltage of the 200P(VDF-TrFE) memristor (M200) decreased by ≈50% and the magnitude of its reset voltage increased by ≈30%. Moreover, M200 was found to have better memory retention characteristics than M100. These differences were attributed to relatively strong local electric fields inside M200 compared to M100. This study suggests the importance of the annealing temperature in polymer memristors.

• Korean Journal of Materials Research
• /
• v.8 no.11
• /
• pp.1026-1030
• /
• 1998

Thermal properties of Fe- base amorpous alloys were investigated. $Fe_{80}P_6C_{12}B_{12}$ and $Fe_{73}P_{11}C_6B_4AI_4Ge_2$ amorphous alloys were fabricated by melt spinning method and thermal analysis was done by differential scanning calorimeter. After isothermal crystallization. the Avrami exponents of $Fe_{80}P_6C_{12}B_{12}$ and $Fe_{73}P_{11}C_6B_4AI_4Ge_2$ amorphous alloys were 1.8-2.2 and 2.5-4.0, respectively. It means the former alloy shows diffusion controlled growth and the latter one shows interface controlled growth. For $Fe_{80}P_6C_{12}B_{12}$ and $Fe_{73}P_{11}C_6B_4AI_4Ge_2$ amorphous alloys. the activation energies of isothermal crystallization was 353 and 371kJlmol. Also the activation energies of nucleation and growth were 301, 324kJlmol and 273. 30lkJ/mol, respectively. Thus $Fe_{73}P_{11}C_6B_4AI_4Ge_2$ amorphous alloy is considered to be more stable than $Fe_{73}P_{11}C_6B_4AI_4Ge_2$ amorphous alloy.

• Journal of Powder Materials
• /
• v.6 no.4
• /
• pp.286-293
• /
• 1999

This study was to analyse the relationship between process parameters of the sintered composite and plasma nitriding properties with pulsed DC plasma. Fe-40at%$SiC_p$ composites of full density were fabricated by hot pressing at 1100~$1150^{\circ}C$. Sintered Fe-40at%Al and Fe-40at%$Al/SiC_p$ alloys were nitrided under pulsed DC plasma. Excellent surface hardness in the FeAl alloys could be obtained by plasma nitriding. ($H_v$ :100gf, diffusion layer : 1100~$1450kg/mm^2$, matrix : 330~$360kg/mm^2$) The wear resistance of $FeAl/SiC_p$ composites were improved about by 4~6times than FeAl and nitrided $FeAl/SiC_p$ were improved about 2 times than $FeAl/SiC_p$ matrix.

• Journal of Sensor Science and Technology
• /
• v.12 no.1
• /
• pp.10-15
• /
• 2003

$PbTiO_3$/P(VDF/TrFE) thin film for pyroelectric infrared sensor's sensing materials have been fabricated by spin coating technique. 65 wt% VDF and 35 wt% TrFE were for P(VDF/TrFE) powder. $PbTiO_3$ powder was used for a ceramic - polymer composites materials. Surface of composite thin film by ceramic fraction factor was observed by SEM. The $PbTiO_3$/P(VDF/TrFE) thin film capacitancy, dielectric constant and dielectric loss measured by impedence analyzer(HP4192A) and pyroelectric coefficient was measured by semiconductor parameter analyzer(HP4145B).

• Journal of the Korean institute of surface engineering
• /
• v.36 no.6
• /
• pp.461-465
• /
• 2003

The microstructures and magnetic properties of electrodeposited Fe-45 wt%Ni-P alloys have been investigated. The structures of electrodeposited Fe-45 wt%Ni alloy was FCC i.e. ${\gamma}$ phase and the size of crystallite was 10 nm. The structure of electrodeposited Fe-45 wt%Ni-1 wt%P alloy showed ${\gamma}$ phase and 7 nm sized nanocrystalline. The electrodeposited Fe-45 wt%Ni-P alloys containing 2∼3 wt% of P exhibited ${\gamma}$ ＋ $\alpha$ dual phases. The electrodeposited Fe-45 wt%Ni-P alloys above 3.5 wt% showed an amorphous structure. P in the alloys acted grain refining and phase changing element. The resistivity of the electrodeposited alloys increased with P contents. Effective permeability at high frequency (above 1 MHz) increased with P contents up to 2 wt% and this was ascribed to the easier magnetization rotation owing to the reduction of eddy current. Effective permeability decreased with P contents above 3 wt% and this was ascribed to the transformation of the ferromagnetism of Fe-45 wt%Ni alloy gradually into paramagnetism with the introduction of P into the electrodeposited alloy matrix.

• Korean Journal of Soil Science and Fertilizer
• /
• v.15 no.3
• /
• pp.162-165
• /
• 1982

As an approach to the explanation of increased availability of phosphate in reduced wetland soils, the interrelationships among pH, pe, $Fe^{+{+}}$ and water soluble phosphate in reduced soil-water suspension was studied. 1. p.e value of soil incubated for 8 weeks at $30^{\circ}C$ under waterlogged condition was sufficiently low to allow the conversion of strengite to vivianite. 2. The concentration of water soluble $Fe^{+{+}}$ in this system was higher than that is allowable by the solubility of vivianite. 3. From the relationship between pH and the concentration of water soluble $Fe^{+{+}}$, the concentration of water soluble $Fe^{+{+}}$ could be determined with the solubility of $FeCO_3$. 4. No definite relationship between pH and water soluble P was recognized which implied that the concentration of water soluble P in this system could not determined with the solubility of vivianite.

• Polymer(Korea)
• /
• v.35 no.5
• /
• pp.375-377
• /
• 2011

$PbTiO_3$/P(VDF/TrFE) 0~3 composites thin films with 0.10 and 0.13 of ceramic volume fraction factor have been fabricated by two-step spin coating technique and analyzed. 0~3 connectivity of $PbTiO_3$/P(VDF/TrFE) composites film was observed successfully by SEM micrography. The SEM picture confirmed 0~3 connectivity. And, in all the properties, 0~3 $PbTiO_3$/P(VDF/TrFE) composites film was superior to P(VDF/TrFE) copolymer. Therefore, with a good low-dielectric constant and a high pyroelectric coefficient, the composite thin films can be used for a new pyroelectric infrared sensor of higher performance.