• Proceedings of KOSOMES biannual meeting
• /
• 2003.11a
• /
• pp.127-133
• /
• 2003

In this study, the impact analysis for the steel fender system that designed for protection of collision between vessel and bridge was performed The size of objective collision vessel assumed as 3000 dead weight tonnage(DWT). The impact forces and the impact energies were estimated by formulas of several design codes, and the steel fender system was designed based on the estimated forces and energy. The bow of objective vessel was modeled as rigid body, and bridge substructure was modeled as fixed support. Since, the impact analysis have the dynamic nonlinear features, such as, material nonlinear, large deformation and contact, explicit structural analysis program was used The analysis results presented that the impact forces formulas in codes have the sufficient conservativeness.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.10a
• /
• pp.71-78
• /
• 2003

In this study, the impact analysis for the steel fender system that designed for protection of collision between vessel and bridge was peformed. The size of objective collision vessel assumed as 3000 dead weight tonnage(DWT). The impact forces and the impact energies were estimated by formulas of several design codes, and the steel fender system was designed based on the estimated forces and energy. The bow of objective vessel was modeled as rigid body, and bridge substructure was modeled as fixed support. Since, the impact analysis have the dynamic nonlinear features, such as, material nonlinear, large deformation and contact, explicit structural analysis program was used. The analysis results presented that the impact forces formulas in codes have the sufficient conservativeness.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.1 s.139
• /
• pp.43-49
• /
• 2005

in this paper a dolphin-fender moored pontoon-type floating structure in shallow water depth is studied focusing on mooring force. The pontoon-type floating structure is 500m long, 300m wide. The structure has partially non-uniform drafts of 2.0m and 3.0m. The employed mooring system is a guyed frame type dolphin-fender system. The 1/125 scale model fender system is made of rubber tube to have hi-linear load deflection characteristics. A series of model tests has been conducted focusing on motion and fender force responses in regular and irregular waves at KRISO's ocean engineering basin Non-linear numerical simulation of fender reaction force has been carried out and the results are compared with those of model tests. The simulated rigid body motion and mooring forces also have been compared with the test results.

• Transactions of Materials Processing
• /
• v.17 no.7
• /
• pp.511-516
• /
• 2008

A drawbead die for the experimental determination of drawbead forces was newly introduced in this paper. While the conventional Nine's drawbead die inevitably includes effects of a blank holding force on the measured drawbead forces, the new drawbead die excludes it by removing the blank holder contact in the dieface. Therefore, the new drawbead die can provide more realistic drawbead forces without considering somewhat arbitrary effect of blank holder with the computational procedure of forming process. The drawbead opening force and restraining force obtained by adopting the two experimental dies were compared for the validation of accuracy in the FEM simulation of automotive fender forming process. The compared section strains and draw-ins confirmed that the present drawbead die provides better drawbead forces for an accurate FEM simulation of sheet metal forming process.

• Journal of Ocean Engineering and Technology
• /
• v.29 no.2
• /
• pp.135-142
• /
• 2015

The float over method is the most preferred method for installing heavy topside onto a jacket platform. A very complex platform with multiple jacket structures on a specific field requires multiple installation procedures. This study validated the installation of two topsides using a single installation barge to reduce the operation and installation cost. The hydrodynamic properties of the installation barge during the installation of two topsides were calculated. The tension and fender forces during docking were investigated to show the validity of the proposed dual topside installation method. In conclusion, the operational safety of the proposed procedure was validated through the calculation of the motion of the installation vessel and loads on the jacket legs.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.217-219
• /
• 2008

A new experimental model for determining drawbead forces, which modifies the dieface of Nine's experimental model, is introduced and the better validity of the drawbead opening and restraining forces of new model than those of Nine's is demonstrated. While Nine's model considers a blank holding force as one of forming variables, new model excludes it by removing blank holder in the dieface. The comparison of the strains found by FEM simulation of automotive fender draw forming process with those measured in a formed panel recommends the new model for accurate drawbead forces.

• Transactions of Materials Processing
• /
• v.16 no.6
• /
• pp.457-462
• /
• 2007

The drawbeads, which are used for controlling the flow of the sheet into die cavity by imposing the tension and for preventing the forming defects like wrinkling, springback, etc. during the sheet forming process, affect the formability strongly because of the differences in the restraint and opening forces according to the drawbead shapes and dimensions. In this study, the experimental device enabling to measure the drawbead restraining and opening forces is manufactured and the drawing forces of circular, square, and step drawbeads are measured. The drawbead restraining and opening forces of a circular drawbead are increased as its drawbead height is increased. Similarly, those of a square drawbead are increased as its height is increased and shoulder radii decreased. The drawbead forces obtained from the experiment were compared with those calculated in the numerical simulation of stamping process of automotive fender. Good agreement was found so that the experimental measurements can be used in the simulation of auto-body stamping process.

• Proceedings of KOSOMES biannual meeting
• /
• 2004.05b
• /
• pp.107-112
• /
• 2004

In order to improve the safety r! ship berthing and the efficiency r! berth operation in the harbour, the berthing energy acting on a ship in berthing maneuver need to be estimated properly. The berthing energy is used as one q the criteria to determine the maximum permissible load of fender as well as important factors to establish the berthing speed and the required power r! tug-beat for pilot and ship operator. In this study, some problems r! present the method of berthing energy are discussed on the basis of the hydrodynamic aspects. Then, series calculations of berthing energy are carried out considering the effect of water depth on added mass and the ship shape for container series from 1,600TEU to 12,000TEU.

• Journal of Navigation and Port Research
• /
• v.29 no.8 s.104
• /
• pp.673-678
• /
• 2005

In order to improve the safety of ship berthing and the efficiency of berth operation in the harbour, the berthing energy acting on a ship in berthing maneuver need to be estimated properly. The berthing energy is used as one of the criteria to determine the maximum permissible load q{ fender as well as important factors to establish the berthing speed and the required power of tug-boat for pilot and ship operator. Some problems of berthing energy are discussed on the basis of the hydrodynamic aspects. Then, series calculations of berthing energy are carried out considering the effect of water depth on added mass and the ship shape for container series from 1,600TEU to 12,000TEU.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.6
• /
• pp.423-428
• /
• 2010

This study is aiming to find one of reasonable guidelines to select a proper berthing ship at Kwang Yang harbors for loading/unloading for the POSCO(Pohang Steel Co. Ltd.). For dynamic analysis for the moored ships, the selection of subjected vessels has to be given the priority, so that the motion characteristics are figured out. The calculation of the dynamic fluid forces and wave, wind and current forces in time domain are followed. Then, the dynamic mooring analyses are performed. This study might contribute to make a new guideline by which the proper sized and loaded ships could be moored safety at the berths of Kwang Yang Harbor.