• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.69-72
• /
• 2002

섬유산업은 fiber로부터 시작하여 yarn, fabric을 거쳐 최종 섬유제품인 clothing을 생산하는 긴 stream을 가지고 있으며, 이와 같이 여러 단계의 공정을 거치는 가운데 섬유물은 새로운 형태를 가지게 되며 부가가치가 형성된다. 특히 garments manufacturing 공정에는 fusing press기가 사용되는데 이 방식은 같은 각속도와 지름을 가진 cylinder로 구동되는 두 개의 상하 벨트구동기구와 내부에 열전식 heather로 구성되어 상하 벨트의 내부로 원단과 심지를 통과시키며 열을 가함으로써 원단과 심지를 접착시킨다. (중략)

• Journal of Biosystems Engineering
• /
• v.25 no.5
• /
• pp.385-390
• /
• 2000

The heat pump is one of heating and cooling systems driven by electricity using natural energy as a heat source. The heat pump system was mainly adopted to a cooling system or a refrigeration system. In regions with a large amount of electricity, it is used as a heating system or a heating and cooling system of houses, buildings and agricultural facilities. During cold weather, air source heat pumps do not work well because of some technical problems, such as frosting on evaporator coil when outside air temperature is below -5$^{\circ}C$. In this research, the heat regenerative technology was employed to eliminate the frosting on evaporator coil and improve the COP of the heat pump system. This fiber belt heat regeneration system(FBHRS) has very simple structure consisting of a geared motor and a porous fiber belt passing through alternatively between cold and warm air duct. The laboratory test showed that the heat pump system with a FBHRS yielded an impressive COP higher than 3.5 at the outside air temperature of -7$^{\circ}C$ in heating mode.

• Steel and Composite Structures
• /
• v.15 no.4
• /
• pp.451-466
• /
• 2013

This paper deals with the multi-objective optimization of tire reinforcement structures such as the tread belt and the carcass path. The multi-objective functions are defined in terms of the discrete-type design variables and approximated by artificial neutral network, and the sensitivity analyses of these functions are replaced with the iterative genetic evolution. The multi-objective optimization algorithm introduced in this paper is not only highly CPU-time-efficient but it can also be applicable to other multi-objective optimization problems in which the objective function, the design variables and the constraints are not continuous but discrete. Through the illustrative numerical experiments, the fiber-reinforced tire belt structure is optimally tailored. The proposed multi-objective optimization algorithm is not limited to the tire reinforcement structure, but it can be applicable to the generalized multi-objective structural optimization problems in various engineering applications.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.293-294
• /
• 2003

최근 다양화된 합섬소재의 등장으로 인해 원사가 다양화되고 그에 따른 가공기술 등의 공정이 복잡해짐에 따라 이들 소재의 기본이 되는 원사의 물성은 여러 공정들을 거치게 되면서 그 역학적 물성들이 변화하게 된다. 원사이후의 공정 특히 사가공 공정에서의 공정에 따른 絲의 물성을 파악하는 것은 직물의 물성 예측에 중요하다. 원사를 가공하는 공정 중 Belt type의 가연기구는 絲손상이 크고 가연 torque가 크며 특히 belt spped의 변화에 의해 적당한 장력이 선정되기 때문에 Pin type과 frictin disk type에서 설정 불가능한 낮은 T$_2$(Untwisting Tension) 장력범위의 가공도 가능하여 부가가치가 높은 絲의 가공이 가능하다. (중략)

• Elastomers and Composites
• /
• v.44 no.3
• /
• pp.299-307
• /
• 2009

The effects of reinforcing materials on durability and mechanical properties of V-rib belt were investigated. Cotton fiber and ZnO were used as a filler for CR, and cotton and aramid fiber were used for EPDM rubber compounds. These materials were prepared as a specimen and V-rib belt for heat resistant and mechanical test. High contents of ZnO give improved wear resistance, and higher contents of cotton fiber showed higher durability in high rotation speed but lower wear resistance for CR rubber compounds. Using the aramid and cotton fiber together in EPDM rubber compounds, thermal and wear resistance were improved simultaneously. The material containing EPDM matrix showed better durability and wear resistance than those of containing CR matrix comparing in the same cotton fiber contents.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.295-296
• /
• 2003

급격히 변하는 국제경쟁사회에서 대다수 섬유기업들은 고기능성, 첨단신소재, 산업용 섬유소재개발 등 실용성이 높은 다양한 새로운 직물을 개발하고 이에 관련된 연구가 이루어지고 있는 추세이다. 이런 다양한 직물을 생산하기 위해서는 원사 자체의 물성에 대한 정확한 data$^{l}$)/를 가지고 원사 이후의 공정 특히 사가공 공정에서의 각 공정에 따른 絲의 물성 변화를 파악하는 것이 중요하다. (중략)

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.118-121
• /
• 2003

PET는 의류용과 비의류용에서 다양화 된 소재로 많이 사용되고 있다. 그러나, 일반적으로 생산되는 regular 絲의 경우 경쟁력이 떨어지기에 고부가가치의 소재를 생산하기 위한 많은 연구가 현재 진행중이다. 최근 국내 원사 Maker에서는 고속생산 및 자동화에 따른 대량생산 System으로 제조원가 절감에 주력하는 한편 기존 공정에서 차별화 소재를 생산 할 수 있는 연구를 계속하고 있다. (중략)

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.6 s.237
• /
• pp.804-808
• /
• 2005

A pneumatic tire is made up of many flexible filaments of high modulus cord of natural textile, synthetic polymer, glass fiber, or fine hard drawn steel embedded in and bonded to a matrix of low modulus polymetric material. Adhesion property of these materials is very important in tire durability safety because belt-leaving-belt tread separation reduces the ability of a driver to control a vehicle, whether or not the separation is accompanied by a loss of air. In this study adhesion test of carcass-belt-tread is conducted on material properties of 5 PCR tire model, which are on sale in domestic market and analyzed adhesion properties. For those tire models FMVSS 109 indoor high speed durability test is conducted to analyze the correlation between adhesion force and high speed performance of tires and found the correlation between the two test results.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.39-40
• /
• 2003

This research surveys the effects of POY physical properties and processing conditions of belt texturing machine to the draw textured yarns. The various textured yarns are made with variation of 1st heater temperature, draw ratio and velocity ratio, and the physical properties of these specimens such as yarn linear density, tensile properties and wet and dry thermal shrinkages are measured and analyzed with POY physical properties and processing conditions of texturing machine. Especially yarn mechanical properties of DTY are analysed with the variation of untwisting tension (T$_2$) on the untwisting part in DTY process and thin and thick DTY yam model are proposed with surging phenomena in DTY process.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11c
• /
• pp.647-653
• /
• 2000

In this research the heat regenerative technology was employed to eliminate frosting on evaporator coil and improve COP of the heat pump system. This heat regenerative device(HRD) has very simple structure consisting a geared motor and a porous fiber belt passing through alternatively between cold and warm air duct. The laboratory test showed that the heat pump system with HRD yielded an impressive COP higher than 3.5 at the outside air temperature of $-7^{circ}C$ in heating mode.