• Elastomers and Composites
• /
• 제30권3호
• /
• pp.218-228
• /
• 1995

To make filler loaded conducting rubber which has excellent electronical and physical properties, CR and NBR were mixed with barium ferrite(BaO.6Fe2O3). From the result of this study, vulcanization characteristics shows that curve is upgraded as the filler concentration increases and CR has higher torque than NBR. In physical properties, elongation being higher, modulus comes to decrease. Tear strength gradually decrease after showing the maximum point when is in the 100phr in CR. Resilience is not good to cause the increase in filler concentration. In electrical properties, conductivity becomes low when filler concentration increase. The increase of voltage makes a conductivity grown, but the rate change is weak. The influence of temperature hardly changes on increasing temperature. The morphology and the dispersion of a conductivity filler in vulcanizates through SEM were good. The more filler concentration increases, the shorter the particle interval is.

• Elastomers and Composites
• /
• 제54권2호
• /
• pp.142-148
• /
• 2019

In this study, the effects of filler particle size and shape on the physical properties of silicone rubber composites were investigated using inorganic fillers (Minusil 5, Celite 219, and Nyad 400) except silica, which was already present as a reinforcing filler of silicone rubber. Fillers with small particle sizes are known to facilitate the formation of the bound rubber by increasing the contact area with the polymer. However, in this experiment, the bound rubber content of Celite 219-added silicone composite was higher than that of Minusil 5-added silicone composite. This was attributed to the porous structure of Celite 219, which led to an increase in the internal surface area of the filler. When the inorganic fillers were added, both thermal decomposition temperature and thermal stability were improved. The bound rubber formed between the silicone rubber and inorganic filler affected the degree of crosslinking of the silicone composite. It is well-known that as the size of the reinforcing filler decreases, the reinforcing effect increases. However, in this experiment, the hardness of the composite material filled with Celite 219 was the highest compared to the other three composites. Furthermore, the highest value of 2.19 MPa was observed for 100% modulus, and the fracture elongation was the lowest at 469%. This was a result of excellent interaction between Celite 219 filler and silicone rubber.

• Restorative Dentistry and Endodontics
• /
• 제24권1호
• /
• pp.88-99
• /
• 1999

The purpose of this study was to investigate the physical properties of experimental composite resins made with the spherical and crushed fillers. The 14 experimental composite resins containing 0, 5, 10, 15, 20 and 25%(w/w) in spherical filler group and 0, 10, 20, 30, 40, 50, 60 and 70%(w/w) in crushed filler group, incorporated in a Bis-GMA matrix (Aldrich Co., USA), were made with 1% ${\gamma}$-methoxy silane treated fillers. The polymer matrix was made by dissolving 0.7%(w/w) of benzoyl peroxide(Janssen Chemical Co. Japan) in methacrylate monomer, whereupon 0.7%(v/v) N,N-dimethyl-p-toluidine(Tokyo Kasei Co. Japan) was added to the monomer. The weight percentage of each specific particle size distribution could be determined from a knowledge of the specific gravity, the weight(w/w), and corresponding volume %(v/v) of the filler sample in resin monomer. In crushed silica group and spherical silica group, the diametral tensile strengths and compressive strengths were measured with Instron Testing Machine(No.4467), and analyzed in 14 experimental composite resins made by filler fractions. The shear bond strength of 14 experimental composite resins to bovine enamel was measured with universal testing machine(Instron No.4467). The fracture surfaces were sputter-coated with a gold film and investigated by SEM. The results were as follows; 1. The diametral tensile strength was tendency to increase in crushed silica group, but not in spherical silica group. The highest diametral tensile strength was found in 20% filler fractions of two groups. 2. The compressive strength was higher in 15%(w/w) and 20%(w/w) in spherical silica group than in crushed silica group, but not in spherical silica group. 3. The significant correlation was noticed in increase in shear bond strength in crushed silica group, but not in spherical silica group. 4. The significantly highest shear bond strength was noticed in 50% filler concentration in crushed silica group, and in 15% filler concentration in spherical silica group, it was not significant in relation. 5. In crushed silica group, cut surface of resin matrix and the interface between resin and filler is obvious. In spherical silica group, fractures that occurred through the filler particles were round in shape.

• 공업화학
• /
• 제9권7호
• /
• pp.961-967
• /
• 1998

종이제조에 있어서 종이의 광학적 성질 및 인쇄적성을 개선하기 위하여 여러 종류의 충전제가 사용되고 있다. 본 연구는 신문용지 제조에 있어서 여러 종류의 충전제, 즉 경질탄산칼슘(PCC), 중질탄산칼슘(GCC), 그리고 혼합된 충전제(PCC+미세활석(MVP) 또는 활석(talc), GCC+MVP 또는 talc))를 종이에 충전시켰을 때 종이의 여러 물성에 미치는 영향을 검토하였다. 얻어진 결과를 요약하면 다음과 같다. 1) 충전제를 지료전건중량당 5% 처리시 동일 처리조건하에서의 충전제 보류율은 PCC 처리시 GCC 처리시보다 16.8% 정도 높게 나타났으며, PCC 및 GCC를 처리했을 때 모두, 배합한 충전제의 입자경이 커질수록($PCC{\leq}GCC<MVP<talc$) 보류율이 증가하는 경향을 나타내었다. 2) PCC 처리시 무처리보다(92.2%) 대비 2.3% 이상의 비교적 높은 불투명도 개선효과를 나타내었으며, 배합한 충전제의 평균 입자경이 클수록 불투명도가 감소하는 경향을 나타내었다. 3) PCC 단독 처리시 GCC 단독 처리시보다 소폭의 인열강도 하락을 나타내었으며 20% 배합처리한 충전제의 평균 입자경이 커질수록 인열강도가 증가하는 경향을 나타내었다. 4) PCC 단독처리시 비교적 높은 인장강도를 나타내었으며, 다른 충전제와 혼합처리시 인장강도의 하락폭은 GCC 처리쪽이 적은 것으로 나타났다. 5) PCC를 처리하였을 경우, 배합한 충전제의 입자경이 커질수록 ($PCC{\leq}GCC<MVP<talc$) 파열강도는 직선적으로 감소하였다. 6) 충전제를 처리하였을때 무처리보다 비교적 우수한 인쇄적성 효과를 나타내었다.

• 인지과학
• /
• 제20권4호
• /
• pp.507-533
• /
• 2009

관계절의 공백과 채움어의 의존관계(gap-filler dependencies)가 어떻게 해결되는지에 대한 가설은 '채움어촉발 처리전략(filler-driven parsing strategy)'과 '공백촉발 처리전략(gap-driven parsing strategy)'으로 요약할 수 있다. 두 가설의 언어보편적 타당성을 알아보기 위해, 본 연구는 안구이동추적법(eyetracking)을 이용하여, 한국어 화자들이 후핵언어(head-final language)인 한국어의 주격관계절과 여격관계절을 실시간으로 처리하는 과정을 살펴보았다. 그 결과, 피험자들이 관계절 내 공백의 위치에서 채움어에 상응하는 그림을 거의 응시하지 않았으나, 관계사와 결합한 관계절동사를 들은 시점부터는 채움어 그림을 응시하는 비율이 큰 폭으로 증가하기 시작하여 머리어를 들은 시점에서 가장 많이, 가장 오래 채움어 그림을 응시하였다. 이 결과는 공백이 관계절의 처리를 촉발하는 것이 아니라, 관계사와 결합한 관계절 동사에서 관계절의 통사처리가 시작되어 채움어가 인지된 시점에서 완성됨을 보여주는 것이다. 또한 주격관계절과 여격관계절 간의 상이한 안구이동 양상은 관계절 내의 논항과 결합한 격조사의 통사정보에 기인하는 것으로 보여서, 한국어의 관계절은 채움어촉발 처리전략을 따르기는 하지만 영어와 같은 선핵언어와는 다른 처리전략이 사용됨을 알 수 있다.

• 한국식품과학회지
• /
• 제12권4호
• /
• pp.272-277
• /
• 1980

본 연구는 유용 세균의 포자를 정제화(tabletting)하는 과정에서 포자의 내구성 특히 타정 압력에 대한 세균 포자의 파괴율을 규명하려 하였다. Bacillus coagulans, Bacillus subtilis 및 Clostridium butyricum의 세가지 포자 형성균의 포자와 포자를 형성하지 않는 세균인 Streptococcus faecalis의 영양세포에 대하여 시험하였다. 정제제조 과정에서 포자의 파괴는 주로 타정과정에서 일어나며 세균의 포자는 타정압력에 대하여 대수적 파괴율을 나타내었다. 세균포자의 압력에 의한 파괴율은 세균의 종류에 따라 달라지며 이것을 정량적으로 나타내기 위하여 Decimal Reduction Pressure라는 개념을 도입하여 P-value라 칭하고 각 세균 포자의 P-value를 구하였든 바 B. subtilis의 포자는 $2.9\;ton/cm^2$, B. coagulans의 포자는 $2.6\;ton/cm^2$, Cl. butyricum의 포자는 $2.1\;ton/cm^2$의 값을 각각 나타내었다. 반면, Str. faecalis의 영양세포는 $1.7\;ton/cm^2$의 낮은 값을 나타내었다. 세균포자의 파괴율은 사용하는 부형제에 따라 영향을 받았으며 동일한 B. coagulans의 포자라도 lactose filler에서는 그 P-value가 $2.8\;ton/cm^2$이었으며 starch filler에서는 $2.0\;ton/cm^2$이었다. 동일한 부형제를 사용하였을 때 생존 포자수는 정제의 경도와 밀도에 역비례하였다. 그러나 경도와 밀도가 낮은 starch filler에서는 lactose filler에 비교하여 더 높은 포자 파괴율을 보였다. 결론적으로 부형제의 종류는 정제 형성뿐만 아니라 세균 포자의 생존에도 중요한 요인이며, 물리적 성질이 서로 다른 부형제를 알맞게 혼합함으로서 타정시 유용세균포자의 생존율을 크게 향상시킬 수 있다.

• 한국산학기술학회논문지
• /
• 제19권12호
• /
• pp.686-693
• /
• 2018

철근 콘크리트 구조물에 다양한 종류의 철근 이음 방법이 개발되고 이를 현장에서 적용하여 왔다. 지난 여러 연구들에 따르면 철근의 직경이 굵어지고 철근의 강도가 커질 경우, 원가 효율 면에서 기계적 이음이 겹침이음보다 상대적으로 우수한 것으로 나타났다. 본 연구에서는 철근 콘크리트 구조물의 고강도 철근(SD600)에 대한 에폭시 충전형 기계적 이음장치를 제시하고 실험을 실시하였다. 이형 철근을 원형 튜브형 강재로 된 커플러에 삽입하고 고강도 에폭시 충전재를 커플러 안으로 주입하면 커플러 안에서 충전재가 경화되면서 이음 장치가 구성된다. 에폭시의 압축강도, 커플러의 길이, 철근의 지름 등에 따른 에폭시 충전형 기계적 이음장치에 대한 일방향 인장시험을 수행하였으며, 실험체의 파괴하중 및 파괴 양상을 관찰하였다. 실험 결과, 실험체의 실제 파괴하중은 에폭시 충전재의 예상 파단 내력의 약 2배 이상으로 나타나 강재 커플러의 구속으로 인하여 경화 에폭시 충전재의 파괴하중이 크게 증가했다는 것을 확인하였다.

• 펄프종이기술
• /
• 제47권5호
• /
• pp.61-67
• /
• 2015

As the production of palm oil has been increased, the generation of oil palm biomass is also increased and the utilization of the oil palm biomass become more significant topic. One third of the oil palm biomass is empty fruit bunch (EFB) and the other two thirds are oil palm trunks and fronds. However, the effective use of oil palm biomass has not been developed and most of it is discarded near oil palm plants. In this study, we investigated the applicability of EFB to the paperboard mills, as an organic filler. The new organic filler was manufactured in a laboratory by grinding and fractionating dried EFB powder, and its properties were analyzed. The particles of EFB organic filler were larger and more spherical than those of the commercial wood powder. The use of EFB organic filler resulted in a higher bulk of the handsheets with similar trends of physical strength, compared to those made with wood powder. It was concluded that EFB could be used as a raw material to manufacture organic filler for paperboard production.

• 펄프종이기술
• /
• 제47권2호
• /
• pp.53-60
• /
• 2015

The effects of stirring speed during filler modification by dual polymers on flocculation and reflocculation of PCC (precipitated calcium carbonate) particles and its effect on handsheet properties were elucidated. PCC surface was modified by adsorbing A-PAM (anionic polyacrylamide) and C-starch (cationic starch) in series at various stirring speeds. It was found that increasing stirring speed during filler modification decreased the initial floc size of PCC. Continuous stirring with the same speed for filler modification resulted in the decrease of a floc size, eventually reached a steady state. The variations in a floc size was influenced by the stirring speed during filler modification: the lower the stirring speed during filler modification, the larger the floc size variations. Conclusively, the stability of PCC floc could be improved by increasing the stirring speed. In addition, the stirring speed influenced the handsheet properties. The smaller the PCC floc, the lower the strength of handseet. However, too much larger floc size also deteriorated paper strength. There exists an optimum floc size in term of paper strength which shall be controlled by stirring speed during filler modification.

• Journal of Welding and Joining
• /
• 제34권2호
• /
• pp.46-53
• /
• 2016

Effect of heating rate on microstructure of brazed joints with STS 304 Printed Circuit Heat Exchanger (PCHE),which was manufactured as large-scale($1170(L){\times}520(W)){\times}100(T)$, mm), have been studied to compare bonding phenomenon. The specimens using MBF 20 was bonded at $1080^{\circ}C$ for 1hr with $0.38^{\circ}C/min$ and $20^{\circ}C/min$ heating rate, respectively. In case of a heating rate of $20^{\circ}C/min$, overflow of filler metal was observed at the edge of a brazed joints showing the height of filler metal was decreased from $100{\mu}m$ to $68{\mu}m$. At the center of the joints, CrB and high Ni contents of ${\gamma}$-Ni was existed. For the joints brazed at a heating rate of $0.38^{\circ}C/min$, the height of filler was decreased from $100{\mu}m$ to $86{\mu}m$ showing the overflow of filler was not appeared. At the center of the joints, only ${\gamma}$-Ni was detected gradating the Ni contents from center. This phenomenon was driven from a diffusion amount of Boron in filler metal. With a fast heating rate $20^{\circ}C/min$, diffusion amount of B was so small that liquid state of filler metal and base metal were reacted. But, for a slow heating rate $0.38^{\circ}C/min$, solid state of filler metal due to low diffusion amount of B reacted with base metal as a solid diffusion bonding.