• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.301-303
• /
• 2014

Flameless combustion, well known as MILD (Moderate Intensity Low oxygen Dilution) combustion or CDC(Colorless Distributed Combustion), is considered as one of the promising technology for achieving low NOx and CO emissions with improving thermal efficiency of combustion system. In this paper, the effects of exhaust gas dilution rate on formation of flameless combustion of liquid fuel were analyzed using three-dimensional numerical simulations for application of gas turbine combustor with high power density. Results show that the local high temperature region was decreased and flame temperature was spatially uniformly distributed due to higher dilution rate of burnt gas as similar pattern of gas phase flameless combustion. But the evaporation and mixing process of liquid fuel are found to be another important factors for formation of flameless combustion.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.189-192
• /
• 2012

The flameless combustion has been considered as one of the promising combustion technology for high energy efficiency and reducing NOx and CO emissions. To investigate the effects of fluid conditions on the formation of flameless combustion, a numerical approach was performed. The flameless combustion possesses lower temperature region and more uniform temperature distribution than conventional flame. The results show that the flow rate of the system which mainly influence on recirculation ratio is the most important parameter for flameless combustion.

• 한국연소학회지
• /
• 제18권2호
• /
• pp.8-16
• /
• 2013

The flameless combustion has been considered as one of the promising combustion technology for high thermal efficiency, reducing NOx and CO emissions. In this paper, the effect of air and fuel injection condition on formation of flameless combustion was analyzed using three dimensional numerical simulation. The results show that the high temperature region and the average temperature was decreased due to increase of recirculation ratio when air velocity is increased. The average temperature was also affected by entrainment length. Generally mixing effect was enhanced at low entrainment length and dilution was dominated at high entrainment length. This entrainment length was greatly affected by air and fuel injection velocity and distance between air and fuel. It is also found that the recirculation ratio and dilution effect were generally increased by entrainment length and the recirculation ratio, mixing and dilution effect are the significant factor for design of flameless combustion system.

• 청정기술
• /
• 제28권3호
• /
• pp.238-248
• /
• 2022

세계는 탄소 중립 사회로의 전환을 추진하고 있으며, 탄화수소계 연료를 수소로 대체함으로써 탄소 중립에 대한 기여를 기대할 수 있다. 하지만 수소 연소에 따른 질소산화물을 제어하기 위한 기술이 필요하며, 무화염 연소 기술이 하나의 대안이 될 수 있다. 본 연구는 수소 함량 및 배가스 재순환율에 따른 메탄-수소 연료의 연소 및 반응 특성을 분석하기 위해 Chemkin 기반의 1차원 대향류 확산화염 모델을 이용하여 해석을 수행하였다. 메탄 연소시 재순환율이 2에서 3으로 증가할 때 열방출의 흡열 구간이 없고 최대 열방출률 영역이 하나로 병합되는 무화염 연소가 달성되었다. 재순환율 3의 수소 전소 시 열방출 측면에서 무화염 연소가 달성되었으나, 화염 구조의 측면에서는 무화염 연소 달성 여부의 판단이 어렵다. 하지만 NO 생성량은 메탄 무화염 연소와 비교하여 유사한 수준으로 예측되었기에 수소 무화염 연소를 규정하기 위해서는 화염 구조, 열방출, NOx 생성에 대한 복합적인 고려가 필요하다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.339-340
• /
• 2012

The purpose of this study is to analyse, the basic parameters through experimentally and with CFD modelling, internal recirculation of the flameless combustion of natural gas. The test rig is made up of a vertical combustion chamber of circle cross section. The inner dimensions of the chamber are $0.2m{\times}1m$ (diameter x height). And CFD simulations of the combustion chamber have been performed using FLUENT 14.0. Some results of this study present the basic parameters and data of flameless combustion.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.449-452
• /
• 2004

“Flameless combustion” of lean to ultra lean mixtures, supported by high-temperature burned gas, can resolve the dilemma between complete combustion versus ultra-low NOx emissions in gas turbine combustors. The characteristics of NOx emissions and combustion in “lean-lean” two-stage combustion were investigated for fuel vapor and droplets / air mixture jets injected from the main injection tube that was placed perpendicular to the combustor wall into the primary hot burned gas prepared by combustion of lean mixtures on a perforated flame holder. The present results clearly show that the ultra-low NOx combustion supported by the reaction of lean mixtures well mixed with the hot burned gas from the primary stage is much more advantageous in achieving ultra-low NOx emissions while maintaining high combustion efficiency.

• 한국연소학회지
• /
• 제15권2호
• /
• pp.27-33
• /
• 2010

Recently, much attention has been paid to utilizing highly preheated air up to $1,000^{\circ}C$ through waste gas in industrial furnaces. The regenerative burner technology has shown to provide significant reduction in energy consumption (up to 60%), downsizing of the equipment (about 30%) and lower emissions (about 30%) while maintaining high thermal performance of the system since 2000. The object of this study is to develop the flameless regenerative burner for industrial furnaces based on the FLOX(Flameless Oxidation) principle and it has been designed and manufactured as pilot scale. Performance tests are experimentally done and their results are discussed. They showed 1) a very good uniformity in temperature distribution, 2) about 100 ppm in NOx at the temperature $1,300^{\circ}C$, 3) about 95% in temperature efficiency. Besides, the regenerative burner has advantage in easy maintenance and high usage rate of regenerator due to the separate and portable type of heat exchanger.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2013년도 제46회 KOSCO SYMPOSIUM 초록집
• /
• pp.47-49
• /
• 2013

Entrainment length and recirculation ratio that are important factors of flameless combustion systems were analyzed by injection conditions using three dimensional numerical simulation. As a result, the entrainment length increased with an increase of momentum ratio and distance of between nozzle. Also, in case of increasing in momentum of oxidation, recirculation ratio was increased and the average temperature was decreased.

• 한국연소학회지
• /
• 제8권1호
• /
• pp.17-24
• /
• 2003

The conventional regenerative system has a high thermal efficiency as well as energy saving using the high preheated combustion air. in spite of these advantages, it can not avoid high nitric oxide emissions. Recently, flameless combustion has received much attention to solve these problems. In this research, numerical analysis is performed for flow-combustion phenomena in the self regenerative burner. In this analysis we used Fluent 6.0 code. the that is developed for commercial use, Methane gas is used as a fuel and two-step reaction model for methane and Zeldovich mechanism for NO generation are used. the velocity of the preheated combustion air is used as a parameter and we analyze the characteristics of flow-field, temperature distributions and NO emissions. Due to the increased recirculation rate, the maximum temperature of flame is significantly increased and NOx emissions is reduced.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제25회 KOSCI SYMPOSIUM 논문집
• /
• pp.97-104
• /
• 2002

The conventional regenerative system has a high thermal efficiency as well as energy saving using the high preheated combustion air. in spite of these advantages, it can not avoid high nitric oxide emissions. Recently, flameless combustion has received much attention to solve these problems. In this research, numerical analysis is performed for flow-combustion phenomena in the self regenerative burner. In this analysis we used Fluent 6.0 code. the that is developed for commercial use, Methane gas is used as a fuel and two-step reaction model for methane and Zeldovich mechanism for NO generation are used. the velocity of the preheated combustion air is used as a parameter and we analyze the characteristics of flow-field, temperature distributions and NO emissions. Due to the increased recirculation rate, the maximum temperature of flame is significantly increased and NOx emissions is reduced