• Journal of the Korea Fashion and Costume Design Association
• /
• v.8 no.2
• /
• pp.27-35
• /
• 2006

We studied the 3D simulating shapes of the flared skirt using NARCIS-Drape Simulation software made in Korea D&M FT. The experimental conditions were made of three types of cuttings (lengthwise, crosswise, 45 bias) and polyester fabrics for flared skirt (light, medium, heavy) and different simulating repetitions (1, 2, ${\cdots}$, 9, 10 times). We accomplished some experimental data on the 3D simulating shapes of the flared skirt made by different conditions. The 3D simulation shapes of the flared skirts were gradually getting stabilized from 5 repetitions. And the length of skirts and the width and depth of hems diminished lower by degrees as the simulating repetitions. It is considered that the simulating repetition for the flared skirt was appropriate in the range of 8 to 10 times. But it was not reasonably showed that the difference in the drape of the flared skirt was made by different cuttings and fabrics.

• Fashion & Textile Research Journal
• /
• v.12 no.5
• /
• pp.626-632
• /
• 2010

The results of the image evaluations by various shapes of skirts which are typical female's lower garment were as follows; 1. The composition factors of images by the shapes of skirts were classified into five factors. The 1st factor is lovely image factor, the 2nd is attractive image factor, the 3rd is practical image factor, the 4th is slim-looking image factor and the 5th is long-looking image factor. 2. In the 1st factor- lovely image factor, tiered skirt, $360^{\circ}$ flared skirt and $180^{\circ}$ flared skirt were evaluated to express lovely images. In the 2nd factor- attractive image factor, $180^{\circ}$ flared skirt was evaluated to express refine and attractive images. In the 3rd factor- practical image factor, $360^{\circ}$ flared skirt and gathered skirt were evaluated to express easy and practical images. In the 4th factor- slim looking image factor, males evaluated 8gored skirt and females evaluated gathered skirt to express fat images. In the 5th factor- long looking image, $180^{\circ}$ flared skirt was evaluated to express long looking images by both sexes. 3. In the lovely image factor, gathered skirt was evaluated most differently between the sexes. Both in the attractive and practical image factor, tiered skirt was evaluated most differently between the sexes. 4. In the preference of male and female university students according to the shapes of skirts, both the sexes prefered flared skirt. But the low prefered shapes of skirts were differently evaluated between the sexes; the male students' was A-lined skirt and the female's was pleated skirt and wrap skirt.

• Fashion & Textile Research Journal
• /
• v.10 no.6
• /
• pp.989-996
• /
• 2008

The purpose of this study is to provide the basic knowledge for the pattern development of a flared skirt. Two flat pattern (FP) methods, the concentric circle method and the corrected concentric circle method, and a draping were used for pattern making. Using these patterns, skirts were made with lengthwise grain in the centerline. The influence of pattern making method on the silhouette of the flared skirt was evaluated by the hemlines formed at the skirt worn in a dress form. Moreover, the combined influence of pattern making method and cutting direction on the silhouette of the flared skirt was examined with the draping pattern (DP) skirt and a FP skirt with $45^{\circ}$ bias grain in the centerline. The DP skirt had more uniform nodes and formed a stable wave form than the FP skirts throughout the whole hemlines. The number of nodes was reduced with lining in the two FP skirts, whereas the number of nodes was not changed in the DP skirt. The unit wave form of all the skirts by three patterns showed long loop form, and the slope angles of the unit wave form of the two FP skirts were higher than that of the DP skirt. The silhouette of the flared skirt was highly influenced by the shape of the waist circumference line in patterns. The DP skirt with lengthwise grain in the centerline showed good silhouette with uniform nodes and high marking efficiency, compared to the FP skirt with $45^{\circ}$ bias grain in the centerline.

• Journal of Fashion Business
• /
• v.18 no.6
• /
• pp.38-56
• /
• 2014

This study compared the flared skirts on 3D simulation and in real to show diverse forms in women's clothing depending on the body's gait and motion. By finding the problems, we suggested the possible methods for utilizing the 3D simulation in the clothing industry. First, the 3D simulation of flared skirts showed similar forms of appearance according to the flare length and volume. However, virtually formed drape shape was even in size and spacing, whereas it was not even in real. Second, according to the results of appearance test on the length and flare volume at $90^{\circ}$ and $180^{\circ}$, both real and 3D simulation skirts were evaluated to have outstanding appearances regardless of the skirt length. However, as the flares volume increased, the skirts with longer length were evaluated to have superior appearances compared to the skirts of shorter length. Third, it showed higher resemblance between the real and virtual simulation, when the skirt had less flare and as the skirt length shortened. However, it showed greater difference between the real and virtual simulation when flare volume and length increased. The length and volume of the skirt and the physical properties of the material are predicted to be different between the real and virtual simulation. However, they usually are similar in forms, so it is believed possible to use for predicting the design's silhouette or the feel when it is worn. This method can be applied on internet shopping malls, which can possibly reduce unnecessary time and expenses.

• The Research Journal of the Costume Culture
• /
• v.17 no.3
• /
• pp.472-483
• /
• 2009

The purpose of this study is to analyse the effects of knit samples' mechanical properties on changes of skirt length of knit flared skirt, and to compare it to the knitting method of a seamless knitted flare skirt. So, I compared the appearance and 3-dimensional shape of a seamless knitted flare skirt with those of a fully cut knit flared skirt. For this study, 18 kinds of cut and sew or seamless knitted test garment were made. The data analysis methods used in this study were descriptive statistics, one-way ANOVA, correlation analysis, and regression analysis. The results are as follows: The result of the evaluation of knit samples' mechanical properties by the KES-FB system showed that elongation decreased as gauge increased and course direction was greatest among grain directions. The length change after wearing the knitted flare skirts appeared wholly equal to the seamless knitted, compared with the cut and sew. The change was biggest at $180^{\circ}$, 7G of the cut and sew. In grain direction, bias cut showed more than 1.2cm of length change. As the weight and thickness increased, the length changes become larger. The regression analysis indicated that the greatest contributive variables on the length changes were elongation, weight, and thickness.

• Fashion & Textile Research Journal
• /
• v.10 no.5
• /
• pp.660-667
• /
• 2008

The purpose of this study was to modify a Flared Skirt for women according to the somatotype of lower body. The subjects for the wear test were 3 students, who were in $mean{\pm}1{\sigma}$ each somatotype. The results of this study are as follows: First, the Flared Skirt pattern was modified according to each type. The front waist line rising measurement proposed for type 1 and type 2 were 0.5cm, because of lower front silhouette with waist shape. The back waist line rising measurement proposed for type 2 was 1cm and type 3 was 0.5cm, because of lower back shape with hip. Second, the wave-height of nodes were regular at front and back in type 1. Also, the wave-height of nodes were evenly distributed side and center. The variation ratio of wave-height of back nodes were lower than existing pattern in type 2 and type 3. It means the variation ratio of wave-height of back nodes were regular in modification pattern. Altogether, modification patterns were more regular and lower than existing pattern in the number of nodes, the distribution ratio of nodes, the wave-height of node, the variation ratio of wave height of nodes.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.9 no.3
• /
• pp.35-46
• /
• 2007

The purpose of this study was to modify a Flared Skirt for women according to the somatotype of lower body. The subjects for the wear test were 3 students, who were in mean${\pm}1{\sigma}$ each somatotype. As seen in the study, it was found out that there was a difference in three dimensional shape of the lower part of the body even in the group of whom the body heights, measured by Martin's system, are alike. Due to such a difference in the three dimensional shape of the lower part of the body, it was found out to be a difference in drapability of the flare skirts. In order to have better fitness of the lower part of the body and to raise the visual effect, therefore, it is suggested that there need to develop a new model of the flare skirts considering three dimensional shape of the lower part of the body for the wearer or to take complementary measures for each body shape in case of applying traditional model.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.13 no.4
• /
• pp.388-399
• /
• 1989

The purpose of this study was to investigate the effects of garment design, fabric type and the presence of lining on the thermal insulation value $(I_{cle}\;and\;I{cl})$ and clothing area factor $(f_{cl})$ of skirts. A standing, electrically heated thermal maninkin was used to measure the insultation value of eighty skirts-five skirt styles with eight different fabrics, with and without lining. The air temperature of the chamber was set at $22.2^{\circ}C{\pm}0.5^{\circ}C$ , air velocity was limited to less than 0.1 m/s, and relative humidity was approximately $50\%$. The results are as follows: 1) The Ic, values of gathered skirt and flared skirt, which had high $f_{cl}$ values, were significantly higher than those of other skirts, though the highest $I_{cle}$ value among five styles wer pegged skirt. 2) Insulation values of various skirts were more relevant with physical properties such as thickness, air permeability, and thermal transmission of the materials rather than fiber content. 3) The addition of lining made significant difference in the insulation values of skirts and the differences of gathered and flared skirt were significantly higher than those of othere types of skirts.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.13 no.2
• /
• pp.103-119
• /
• 2011

This study set out to analyze the solid shapes of knit flared skirts, which are best represented in a 3-dimensional shape for all knit skirts, according to the seamed and seamless production method and to estimate the silhouettes of knit flared skirts based on the results. It also aimed to help with the introduction and spread of seamless weaving by revising and supplementing potential problems and provide findings that would be put to active use as basic data, thus contributing to the development of original knitwear and offering fundamental materials for the development of the knitting industry. A number of experimental knit flared skirts were made according to skirt angle ($90^{\circ}$ and $180^{\circ}$), gauge (7G, 12G, and 15G), and grain (bias, wale, and radial), including 12 kinds of seamed knit flared skirts and 6 kinds of seamless knit flared skirts. Using a three-dimensional shape measurement system, the investigator measured the cross-sectional shapes of their hemlines. The SPSS 12 Version program was used for statistical processing, and descriptive statistics such as mean and standard deviation were used to compare the seamed and seamless knit flared skirts in the measurements (measurement items) of their solid shapes according to the width, gauges, and grain directions. The central grain direction of seamless knit flared skirts was in a radial form and even hemlines, thus presenting a beautiful appearance and solid shape. The 3-dimensional shapes show that seamless knit flared skirts are superior to seamed ones. The research findings are expected to open a door for Korea's knitting industry to quickly respond to small quantity batch production and additional orders.

• Fashion & Textile Research Journal
• /
• v.17 no.4
• /
• pp.613-625
• /
• 2015

This research was conducted to provide basic data to improve expressivity required for virtual clothing to replace actual clothing. For the experiment, 6 materials were selected and 12(2 kinds of length) actual flared skirts were made. At the same time, simulations were carried out on OptiTex Runway 12.0 for 36(12 kinds of skirts $\times$ KES, FTU, KES weight/10) kinds of virtual flared skirts, which were applied with the measured property values (thickness, weight, bending, shear, friction, and stretch). Also, the study compared and analyzed the wearing images, silhouette overlapping images, and skirt length measurements of the actual and virtual skirts put on a dummy. As a result, the actual skirts showed clear distinction for each material. In contrast, virtual 1 and 2 expressed fabric 3 in the most similar way, but could not recreate the uniform, soft, and natural flare shape of the actual skirts in general. Virtual 3 formed natural flares as those of the actual skirts, and expressed fabric 1, 5, and 6 in a similar way. However, virtual 3 had too much volume and barely showed any distinction for each material. All of virtual 1, 2, and 3 expressed different flare shapes on the front and back sides of the skirt similarly to the actual skirts, and had a good visual expression for the color and texture of the materials. However, they could not effectively express the elasticity and fabric sagging in the bias direction.