• 제목/요약/키워드: Flash

검색결과 2,446건 처리시간 0.042초

A High Performance Co-design of 26 nm 64 Gb MLC NAND Flash Memory using the Dedicated NAND Flash Controller

  • You, Byoung-Sung;Park, Jin-Su;Lee, Sang-Don;Baek, Gwang-Ho;Lee, Jae-Ho;Kim, Min-Su;Kim, Jong-Woo;Chung, Hyun;Jang, Eun-Seong;Kim, Tae-Yoon
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제11권2호
    • /
    • pp.121-129
    • /
    • 2011
  • It is progressing as new advents and remarkable developments of mobile device every year. On the upper line reason, NAND FLASH large density memory demands which can be stored into portable devices have been dramatically increasing. Therefore, the cell size of the NAND Flash memory has been scaled down by merely 50% and has been doubling density each per year. [1] However, side effects have arisen the cell distribution and reliability characteristics related to coupling interference, channel disturbance, floating gate electron retention, write-erase cycling owing to shrinking around 20nm technology. Also, FLASH controller to manage shrink effect leads to speed and current issues. In this paper, It will be introduced to solve cycling, retention and fail bit problems of sub-deep micron shrink such as Virtual negative read used in moving read, randomization. The characteristics of retention, cycling and program performance have 3 K per 1 year and 12.7 MB/s respectively. And device size is 179.32 $mm^2$ (16.79 mm ${\times}$ 10.68 mm) in 3 metal 26 nm CMOS.

NAND Flash Memory Pattern Test를 위한 PMBIST (PMBIST for NAND Flash Memory Pattern Test)

  • 김태환;장훈
    • 전자공학회논문지
    • /
    • 제51권1호
    • /
    • pp.79-89
    • /
    • 2014
  • 최근 새롭게 보급되는 휴대기기(스마트폰, 울트라북, 태블릿 PC)로 인하여 고용량과 빠른 속도를 원하는 소비자가 증가하고 있다. 이에 따라 Flash Memory의 수요도 지속적으로 증가하고 있다. Flash Memory는 NAND형과 NOR형으로 구분되어 있다. NAND형 Flash Memory는 NOR형 Flash Memory에 비해 속도는 느리지만 가격이 저렴하다. 그렇기 때문에 NAND형 Flash Memory는 Mobile 시장에서 많이 사용되어지고 있다. 그래서 Flash Memory Test를 위한 Fault 검출은 메우 중요하다. 본 논문에서는 Fault 검출 향상을 위한 NAND형 Flash Memory의 Pattern Test를 위한 PMBIST를 제안한다.

Flash 영상과 No-flash 영상을 이용한 파노라마 영상합성 (Panoramic Image Synthesis Using Flash and No-Flash Image Pairs)

  • 예상명;박래홍
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2007년도 하계종합학술대회 논문집
    • /
    • pp.355-356
    • /
    • 2007
  • This paper proposes a new panoramic image synthesis method using flash and no-flash image pairs, which reduces undesirable artifacts. Generally, in panoramic images, it is difficult to determine to use a flash in indoor environment. A flash image has unwanted artifacts such as hot spots and tunnel effect whereas a no-flash image also has artifacts like glass reflection. We derive cross projection tensors using flash and no-flash image pairs and transform the gradient field of a no-flash image using them. The image reconstructed from the modified gradient provides enhanced results, which are applied to synthesis of panoramic images. The proposed method can provide a better panoramic image than the conventional method. Experimental results show the effectiveness of the proposed method.

  • PDF

에러 분포의 비대칭성을 활용한 대용량 3D NAND 플래시 메모리의 신뢰성 최적화 기법 (Reliability Optimization Technique for High-Density 3D NAND Flash Memory Using Asymmetric BER Distribution)

  • 김명석
    • 대한임베디드공학회논문지
    • /
    • 제18권1호
    • /
    • pp.31-40
    • /
    • 2023
  • Recent advances in flash technologies, such as 3D processing and multileveling schemes, have successfully increased the flash capacity. Unfortunately, these technology advances significantly degrade flash's reliability due to a smaller cell geometry and a finer-grained cell state control. In this paper, we propose an asymmetric BER-aware reliability optimization technique (aBARO), new flash optimization that improves the flash reliability. To this end, we first reveal that bit errors of 3D NAND flash memory are highly skewed among flash cell states. The proposed aBARO exploits the unique per-state error model in flash cell states by selecting the most error-prone flash states and by forming narrow threshold voltage distributions (for the selected states only). Furthermore, aBARO is applied only when the program time (tPROG) gets shorter when a flash cell becomes aging, thereby keeping the program latency of storage systems unchanged. Our experimental results with real 3D MLC and TLC flash devices show that aBARO can effectively improve flash reliability by mitigating a significant number of bit errors. In addition, aBARO can also reduce the read latency by 40%, on average, by suppressing the read retries.

총구화염저감용 소염기 설계에 관한 연구 (A Study on Designing Flash Suppressor for Reducing Muzzle Flash)

  • 이준호;채제욱;이성배;김현준
    • 한국군사과학기술학회지
    • /
    • 제12권2호
    • /
    • pp.146-151
    • /
    • 2009
  • It is known that muzzle flash can be generated by the reaction between the oxygen in the air and unburned gunpowder contained in the propellant gas if a barrel is not long enough to burn gunpowder fully inside of the barrel. A hugh muzzle flash, which is a characteristic of small arms with short barrel length, disturbs a shooter in aiming at the target at night by making the shooter blind for a while and endangers the shooter's life by revealing firing position to enemies. In addition, the heat of muzzle flash can deteriorate the performance of thermal sights, which are attached to small arms for effective night combat. In this paper, flash suppressors of different shapes were designed for a newly developed 5.56mm caliber rifle with short barrel length and the performance of each flash suppressor to reduce the muzzle flash was compared by on-site test firing. Through the test firing, a highly efficient design of flash suppressor for reducing the muzzle flash was identified. The result of the paper can be referred when designing flash suppressors for small arms with short barrel length.

Seta Flash 밀폐식 장치를 이용한 n-Propanol+n-Hexanol계와 n-Butanol+n-Hexanol계의 인화점 측정 (Flash Point Measurement of n-Propanol+n-Hexanol and n-Butanol+n-Hexanol Systems Using Seta Flash Closed Cup Tester)

  • 하동명;이성진
    • 한국안전학회지
    • /
    • 제34권1호
    • /
    • pp.34-39
    • /
    • 2019
  • Flash point is the important indicator to determine fire and explosion hazards of liquid solutions. In this study, flash points of n-propanol+n-hexanol and n-butanol+n-hexanol systems were obtained by Seta flash tester. The methods based on UNIFAC equation and multiple regression analysis were used to calculate flash point. The calculated flash point was compared with the experimental flash point. Absolute average errors of flash points calculated by UNIFAC equation are $2.9^{\circ}C$ and $0.6^{\circ}C$ for n-propanol+n-hexanol and n-butanol+n-hexanol, respectively. Absolute average errors of flash points calculated by multiple regression analysis are $0.5^{\circ}C$ and $0.2^{\circ}C$ for n-propanol+ n-hexanol and n-butanol+n-hexanol, respectively. As can be seen from AAE, the values calculated by multiple regression analysis are noticed to be better than the values by the method based on UNIFAC eauation.

향상된 혼합 사상기법을 이용한 효율적인 대블록 플래시 메모리 변환계층 설계 및 구현 (Design and Implementation of an Efficient FTL for Large Block Flash Memory using Improved Hybrid Mapping)

  • 박동주;곽경훈
    • 한국정보과학회논문지:컴퓨팅의 실제 및 레터
    • /
    • 제15권1호
    • /
    • pp.1-13
    • /
    • 2009
  • 플래시 메모리는 크기가 작고, 적은 전력을 사용하며 충격에 강하기 때문에 MP3 플레이어, 핸드폰, 디지털 카메라와 같은 휴대용 기기에서 저장장치로 널리 사용되고 있다. 플래시 메모리의 많은 장점 때문에 개인용 컴퓨터 및 노트북에서 사용되는 저장장치인 하드디스크를 플래시 메모리로 대체하고자 하는 연구도 진행되고 있다. 플래시 메모리는 덮어쓰기가 허용되지 않으며 읽기/쓰기의 기본 단위와 삭제의 기본 단위가 다르기 때문에 FTL(Flash Translation Layer)라는 플래시 변환 계층을 사용한다. 최근에는 기존의 플래시 메모리와 다른 물리구조와 특성을 갖는 대블록 플래시 메모리가 등장하여 기존의 FTL을 그대로 사용하게 되면 플래시 메모리를 효율적으로 사용할 수 없다. 본 논문에서는 기존의 FTL 중 가장 좋은 성능을 내는 FAST(Fully Associative Sector Translation)을 기반으로 데이타블록 내에서 페이지단위 사상을 적용하여 대블록 플래시 메모리의 특성에 맞는 FTL 기법을 제안한다.

UNIFAC 그룹 기여 모델에 의한 n-Octnae+n-Decane 계와 n-Octane+n-Dodecane 계의 인화점 계산 (Flash Point Calculation for n-Octane+n-Decane and n-Octane+n-Dodecane by UNIFAC Group Contribution Model)

  • 하동명;이성진
    • 한국안전학회지
    • /
    • 제30권4호
    • /
    • pp.86-91
    • /
    • 2015
  • The flash point is used to categorize inflammable liquids according to their relative flammability. Such a categorization is important for the safe handling, storage, and transportation of inflammable liquids. The flash point temperature of two binary liquid mixtures(n-octane+n-decane and n-octane+n-dodecane) has been measured for the entire concentration range using Seta-flash closed cup tester based on the ASTM D3278 method. The closed cup flash point temperature was estimated using the UNIFAC(Universal Functional Activity Coefficient) group contribution model. The experimentally derived flash point was also compared with the predicted flash point from the UNIFAC model. The UNIFAC model is able to estimate the flash point fairly well for n-octane+n-decane mixture and n-octane+n-dodecane mixture.

Preventing Fast Wear-out of Flash Cache with An Admission Control Policy

  • Lee, Eunji;Bahn, Hyokyung
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제15권5호
    • /
    • pp.546-553
    • /
    • 2015
  • Recently, flash cache is widely adopted as the performance accelerator of legacy storage systems. Unlike other cache media, flash cache should be carefully managed as it has peculiar characteristics such as long write latency and limited P/E cycles. In particular, we make two prominent observations that can be utilized in managing flash cache. First, a serious worn-out problem happens when the working-set of a system is beyond the capacity of flash cache due to excessively frequent cache replacement. Second, more than 50% of data has no hit in flash cache as it is a second level cache. Based on these observations, we propose a cache admission control policy that does not cache data when it is first accessed, and inserts it into the cache only after its second access occurs within a certain time window. This allows the filtering of data disruptive to flash cache in terms of endurance and performance. With this policy, we prolong the lifetime of flash cache 2.3 times without any performance degradations.

Determine the return period of flash floods by combining flash flood guidance and best fit distribution

  • Duong, Ngoc Tien;Kim, Jeong-Bae;Bae, Deg-Hyo
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2020년도 학술발표회
    • /
    • pp.362-362
    • /
    • 2020
  • Flash flood is a dangerous weather phenomenon, affecting humans and the economy. The identification, forecast of the changing trend and its characteristics are increasingly concerned. In the world, there have many methods for determining the characteristics of flash floods, in which flash flood guidance (FFG) is a fast, effective and widely used method. The main source of flash floods is short-term rainfall. In this study, we used the data of cross-sectional measurement at the tributaries and the hourly rain data from the automatic rainfall measurement stations in the Geum river basin. Besides, we use a combination of the flash flood guidance and the best fit distribution function to estimate the repeatability of flash floods for head-water catchments in Geum river basin. In which, FFG determines the threshold of rainfall for flash floods. The study has determined the best hourly rainfall distribution function for the Geum river basin and estimated the maximum rainfall of 1hr according to the return periods.

  • PDF