• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.29 no.3
• /
• pp.66-75
• /
• 2021

As the domestic aviation industry develops, demand for pilots is increasing. As a result, the demand for flight training using flight simulation training devices that implement the same or similar interior of aircraft is also increasing. Despite this increase in demand, domestic laws, regulations and management systems related to flight simulation training devices have remained unchanged since 2009. As a result, the criteria for designation of new or developed flight simulation training devices are ambiguous. In addition, proper improvement of the current system should be prioritized for designation of new devices such as UAM and VR, along with developing flight simulation training devices. It is intended to present measures to improve the domestic flight simulation training system by investigating and analyzing advanced cases overseas.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.26 no.4
• /
• pp.129-141
• /
• 2018

In this paper, two different flight training devices were constructed to verify the effectiveness of a pilot training system based on a Virtual Reality Head Mount Display. VFR Flight Procedure and IFR Flight Procedure were conducted by high level pilots with Commercial Pilot Licence. Flight data and pilot's visual data for each flight procedure were extracted, compared and analyzed with two training systems. Finally, the effectiveness of the training systems based on the VR HMD was demonstrated by assessing the given mission and the flight results.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.29 no.3
• /
• pp.117-121
• /
• 2021

The Multi-crew Pilot License (MPL) is a new pilot qualification introduced by ICAO to train co-pilots for transport aircraft based on efficient and stable competency to respond to changes in the operating environment and technology. ICAO and the European Union Aviation Safety Agency (EASA) require a minimum flight of 240 hours for MPL qualification training, and allow the use of flight simulation training devices (FSTDs) for most of the training, specifying the performance requirements for FSTDs. As South Korea is also preparing for the operation of the MPL training program, it is essential to establish the operating standards for FSTDs required for MPL training. This study aims to identify the international standards for FSTDs related to MPL training, and to compare them with the current operating standards for FSTDs in South Korea for presenting a standard (draft) that can be used when introducing domestic MPL training programs in the future.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.3
• /
• pp.477-483
• /
• 2022

A flight simulator is a device that allows pilots attain proficiency of various situations and a sense of flight, and as interest in scientific training increases in modern aviation, aviation training organization develop and operate simulators. Therefore, in this study, the process of developing a motion-based helicopter simulation Training Device using a commercial program. Citing previous studies, the specificity of helicopter flight education and the positive effect of motion simulators were confirmed. In addition, the design and program of the motion device were studied in the process of checking the configuration and current regulations of flight simulation training devices and developing a helicopter motion simulator. A motion program was set based on the system design and structural design of the flight simulator, and data received from the flight simulator was identified to confirm the expected operating shape. Through this study, we intend to create a positive expected effect on pilot training by completing a motion-based helicopter simulator.

• Journal of Advanced Navigation Technology
• /
• v.27 no.1
• /
• pp.23-35
• /
• 2023

Evidence-based training (EBT) improves a pilot's competency and confidence based on the data(Evidence) from actual aircraft accidents, incidents, operations, and training for safe operation in the fast-paced and large-scale air transportation field. It is a training/assessment program that strengthens resilience for problem solving. As a way to apply this evidence-based training(EBT) to the educational system of ATO and to resolve the problems, I propose 3 improvement plans. They are evaluation criteria that apply the core competencies of EBT to the educational evaluation system, the way to improve the system for standardization of practical test examiners and instructors and also the ways to use Flight Simulation Training Devices(FSTD).

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.12
• /
• pp.1035-1042
• /
• 2016

By using commercial flight simulation game engine, X-Plane, we have studied QTG(Qualification Test Guide) generation that can satisfy FTD level 5. Flight model is SR-20 of Cirrus. In list of QTG, There are some items to measure control forces. therefore, we have installed CLS(Control Loading System) to flight control devices in order to make it possible to measure control forces. We made Autopilot function externally to make flight model in trim conditions because X-Plane don't provide internal trim routine function. In addition to develop an algorithm, it can automatically perform the test. To avoid the inconvenience to control as it was to be carried out in same conditions. In case of FTD level 5, it is possible to use alternative data sources not only real flight data. By using these alternative data sources, all test results satisfy a scope given by CFR Part 60.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.7 no.1
• /
• pp.19-29
• /
• 1999

This paper proposes a system intergration method for M20J flight simulator development. The simulator consists of three modules. The first module is for flight dynamics simulation, and the second module is for avionic systems and flight instrument and the last module is for interface card which connects PC and input devices using rotary encoders and switches. Two computers are equipped in the simulator for instructor and trainee. An instructor can give a mission to a trainee, and control the flight simulation options through RS-232C serial port. Also, the instructor can monitor the training results of the trainee.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.27 no.2
• /
• pp.54-69
• /
• 2019

The primary objective of this paper is to introduce the application of Human-Machine Interface (HMI) and Augmented Reality (AR) technologies in flight operations. These include: self-check-in, baggage handling, airport security and surveillance, airport operations monitoring, In-Flight Entertainment and Connectivity (IFEC), cockpit design, and cabin crew support. This paper investigates the application status and development trends of HMI and AR technologies for airports and aircraft. These technologies can provide more efficient in-flight passenger service and experience by using AR devices. This paper also discusses the developments such as; the Integrated Control Application (ICA) for the IFEC interface, AR flight simulation training program using the fixed-based simulator, and the AR aircraft cabin interior concept test program. These applications present how HMI and AR techniques can be utilized in actual flight operations. The developed programs in this paper can be applied to their purpose within aircraft interiors and services to enhance efficiency, comfort, and experience.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.17 no.4
• /
• pp.48-54
• /
• 2009

We implemented the Aural Cueing System(ACS) system of the reconfigurable tactical trainer(RTT) for th rotor aircraft. RTT provides a collective training system to meet aviation training requirements and supports organizational training for aviations units in combined arms collective training and mission rehearsal. ACS handles the volume, pitch and repetition of the digitally stored sounds based on commands it receives from an UDP/IP. In this paper, we explained and implemented the conceptual and detail design the ACS system for the rotor aircraft such as AH-1H(Iroquios), UH-60(Blackhwak), AH-1(Cobra) etc. The conceptual design composed of the sound cueing data analysis, sound modelling which is inner, outer, weapon and warn environment of rotor aircraft, sound synthesis and replay.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.44-51
• /
• 2005

Water flow in rivers during flood season can be 10 to 100 fold higher than normal seasons (low precipitation) in Japan and predicting flood runoff is essential for operating reservoirs with discharging gates. Abundant experiences and knowledge are requisites for operators to be able to make efficient decisions at work. This research investigated a method to transfer technical knowledge by acquiring skills and knowledge from actual dam operators and by using the information to construct an educational training system. The purpose of the research was to enable the execution of a secure and rational reservoir operation during flood period. The educational training system for reservoir operation was developed with the focuses on acquiring knowledge on hydraulics and hydrology and learning about decision making related to the reservoir operation as well as the timing of control. The system is capable of conducting education that corresponds to individual levels in each location. Of the educational training methods, a lecture method that uses textbooks is effective for the understanding of basic knowledge and concepts while a training method that uses a simulation device is essential for the practice of advanced and specialized procedures in specific fields. Simulation devices are used in operational training for airplane flight and driving cars and trains. The educational system presented here was designed to provide further assistance to those who have acquired basic knowledge and concepts through textbooks and also to at low them to perform the satisfactory operation of dam equipment. Our research proposes a method which can realize a system to acquire technical skills-the skills which are the foundation of technical knowledge and operation.