• Computers and Concrete
• /
• 제9권1호
• /
• pp.1-19
• /
• 2012

The size-effect study of various fracture parameters obtained from two parameter fracture model, effective crack model, double-K fracture model and double-G fracture model is presented in the paper. Fictitious crack model (FCM) for three-point bend test geometry for cracked concrete beam of laboratory size range 100-400 mm is developed and the different fracture parameters from size effect model, effective crack model, double-K fracture model and double-G fracture model are evaluated using the input data obtained from FCM. In addition, the fracture parameters of two parameter fracture model are obtained using the mathematical coefficients available in literature. From the study it is concluded that the fracture parameters obtained from various nonlinear fracture models including the double-K and double-G fracture models are influenced by the specimen size. These fracture parameters maintain some definite interrelationship depending upon the specimen size and relative size of initial notch length.

• Geomechanics and Engineering
• /
• 제32권3호
• /
• pp.321-333
• /
• 2023

Rock masses often contain natural fractures of varying sizes, and the size of the natural fractures may affect the propagation of hydraulic fractures. We conduct a series of triaxial hydraulic fracturing tests to investigate the effect of the pre-existing fracture size a on hydraulic fracture propagation. Experimental results show that the pre-existing fracture size impacts hydraulic fracture propagation. As the pre-existing fracture size increases, the hydraulic fracture propagates towards the pre-existing fracture tips, evidenced by the decreased distance between the final hydraulic fracture and the pre-existing fracture tips. Furthermore, the attracting effect of pre-existing fracture tips increases when the distance between the wellbore and the pre-existing fracture is short (L/D=2 or 4 in this study). With increased distance between the wellbore and the pre-existing fracture (L/D=6 in this study), the hydraulic fracture propagates to the middle of the pre-existing fracture rather than the tips, as the attracting effect of the pre-existing fracture diminishes.

• 소성∙가공
• /
• 제24권3호
• /
• pp.176-180
• /
• 2015

The current study is concerned with the prediction of fracture strains for DP980 steel sheets over a wide range of loading paths. The use of DP980 steel is increasing significantly in automotive industries for enhanced safety and higher fuel efficiency. The material behavior of advanced high-strength steels (AHSSs) sheets sometimes show unpredictable and sudden fracture during sheet metal forming. A modified Lou-Huh ductile fracture criterion is utilized to predict the formability of AHSSs because the conventional forming limit diagram (FLD) constructed based on necking is unable to evaluate the formability of AHSSs sheets. Fracture loci were extracted from three dimensional fracture envelopes by assuming the plane-stress condition to evaluate equivalent plastic strains at the onset of fracture for a wide range of loading paths. Three different types of specimens -- pure shear, dog-bone and plane strain grooved -- were utilized for tensile testing to calibrate the fracture model of DP980 steel sheets. Fracture strains of each loading path were evaluated such that there shows little deviation between fracture strains predicted from the fracture model and the experimental measurements. From the comparison, it is clearly shown that the three dimensional fracture envelopes can accurately predict the onset of the fracture of DP980 steel sheets for complicated loading conditions from compressive loading to shear loading and to equibiaxial tensile loading.

• Journal of Trauma and Injury
• /
• 제28권4호
• /
• pp.280-283
• /
• 2015

The adolescent Tillaux fracture is an avulsion fracture of the anterolateral corner of the distal tibial epiphysis caused by external rotation of the foot. This type of fracture occurs during epiphyseal fusion in adolescence. A difficult to detect Tillaux fracture was discovered on a preoperative radiograph, such fractures have rarely been reported to accompany a predominantly adult-type ankle fracture. Especially, to the best of our knowledge, no case of a trimalleolar ankle fracture in an adolescent with a Tillaux fracture has been reported. Thus, we present a case of a trimalleolar ankle fracture in a 15-year-old adolescent with a Tillaux fracture who was successfully treated surgically.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1358-1361
• /
• 2003

In this study, intrinsic static/dynamic fracture toughness of Al 7175-T74 are evaluated from the apparent static/dynamic toughness of notched specimen. The notch/crack critical average stress fracture model is suggested to establish the relationship to predict the intrinsic fracture toughness from the apparent fracture toughness of a notched specimen. The notch/crack critical average stress fracture model is established using the relation between the notch root radius and the effective distance calculated by finite element analysis. It is conclude that the true fracture toughness can be estimated from test results of apparent fracture toughness measured by using a notched specimen. Also, critical notch root radius can be predicted by notch/crack critical average stress fracture model.

• 한국임상수의학회지
• /
• 제15권1호
• /
• pp.222-227
• /
• 1998

This survey was based on the data of one hundred four dogs with 108 case,T of fracture admitted to the veterinary teaching hospital, College of Veterinary Medicine, Kyungpook National University and 24 private small animal hospitals from January, 1995 to Decemberi 1996. The results were analyzed as following criteria; the distribution of fractures causes of fractured age and sexual distributions month of the most frequencel total body weights presence of communicating external wound, extent of damaged direction of fracture line, location of fracture liner fracture managements fixations methods, fixations methods according to location of fracture. The results of survey were as follow: 1. Main distribution of fracture; radius . ulna (23.1%).2. Causes of fracture; road toraffic accident (39.4 T,). 3. Age; over 24 months (27.9%). 4. Sex; male (53.89)), female (46.2%). 5. Month of the most frequence; July (14.4%) 6. Total body weight: 2-5 kg (45.27)). 7. Presence of communicating external wound; closed fracture (94.2%). 8. Extent of damage; complete fracture (92.6%). 9. Direction of fracture line: comminuted fracture (27.8 To). 10. Location of fracture line; diaphysis (62.0%). 11. Fracture management; open reduction (58.3% ). 12. Fixation methods; not treat (22.2%). 13. Fixation methods according to location of fracture; radius ulna-Kirschner wire fixation (45.5%), femur. shaft-intramedullary pinning (71.4%), pelvis-bone plate (53.3%), metacarpus-not treat, Kirschner wire fixation (each 30.8%).

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제26권5호
• /
• pp.507-513
• /
• 2000

Objective : The purpose of this study is to evaluate the vitality of the teeth in and adjacent to the mandibular fracture line according to variable conditions of fracture and to establish the protocol of treatment of fracture line teeth. Materials and Methods : The vitality of 97 teeth in fracture line and 104 teeth adjacent to fracture line of 52 patients were invested preoperatively. Of these, 66 teeth in fracture line and 72 teeth adjacent to fracture line were monitored at least 6 months after operation. An electric pulp tester was used to measure pulpal response. The relationships between the vitality of teeth in variable time(preoperation, immediate post-operation; within 1 week after operation, and 6 months after operation) and variable conditions of fracture(horizontal, vertical gap of fracture line, the number of fracture line)were evaluated statistically. Result : The vitality of fracture line teeth in the 6 months after operation statistically differed by the vertical gap of fracture line and the number of fracture line. The vitality of fracture line adjacent teeth in the immediate post-operation only statistically differed by the vertical gap of fracture line. There were statistically differences between preoperative EPT value and vitality of fracture line teeth on 6 months after operation. There were 5 cases of complications including periapical and periodontal abscess. Of these, only one tooth was extracted and the others were well treated with endodontic treatment and subgingival curettage. Conclusion : It is recommended to retain teeth and to monitor the vitality of teeth in and adjacent to fracture line, unless there is an absolute indication for extraction.

• Journal of Chest Surgery
• /
• 제45권4호
• /
• pp.246-250
• /
• 2012

Background: Although it is rare for the fracture itself to become a life threatening injury in patients suffering from rib fracture, the lives of these patients are occasionally threatened by other associated injuries. Especially, early discovery of patients with rib fracture and intra-abdominal organ injury is extremely important to the prognosis. This study analyzed the link between rib fracture and intra-abdominal injury to achieve improved treatment. Materials and Methods: Among trauma patients that had visited the hospital emergency room from January 2007 to December 2009, a retrospective study was conducted on 453 patients suffering from rib fracture due to blunt trauma. Rib fracture was classified according to location (left, right, and bilateral), and according to level (upper rib fracture [1-2nd rib], middle rib fracture [3-8th rib], and lower rib fracture [9-12th rib]). The researched data was statistically compared and analyzed to investigate the correlation between the location, level, and number of rib fracture and intra-abdominal organ injury. Results: Motor vehicle injury was found to be the most common mechanism of injury with 208 cases (46%). Associated injuries accompanied with rib fracture were generated in 276 cases (61%). Intra-abdominal organ injury was discovered in 97 cases (21%). Liver injury was the most common intra-abdominal injury associated with rib fracture with 39 cases (40%), followed by spleen injury, with 23 cases (23%). Intra-abdominal injury according to level of rib fracture was presented as upper rib fracture in 11 cases (11%), middle rib fracture in 31 cases (32%), and lower rib fracture in 55 cases (57%), thus verifying that intra-abdominal injuries were commonly accompanied in lower rib fractures (p=0.03). In particular, significant increase of intra-abdominal injury was presented in fractures below the 8th rib (p=0.03). The number of intra-abdominal injuries requiring emergency operations was significantly higher in patients with more than 6 rib fractures (p=0.04). Conclusion: Intra-abdominal organ injury is more common in patients with lower rib fracture, especially fractures below the 8th rib. Intra-abdominal organ injuries generated in multiple rib fracture patients with more than 6 fractures significantly higher severity. These cases must be thoroughly inspected and carefully observed as there is possibility of emergency operation.

• 한국가스학회지
• /
• 제19권5호
• /
• pp.13-19
• /
• 2015

본 연구에서는 보다 현실적인 파쇄균열 전파를 묘사하기 위해 수압파쇄균열 전파 모델을 개발하였다. 이 모델에서는 두 가지 균열 전파 기준을 적용하였다. 첫 번째는 균열의 발생각을 결정하기 위한 최대 접선응력 기준과 두 번째는 파쇄균열의 자연균열 통과 여부 기준이다. 본 모델의 검증 결과, 수압파쇄균열이 자연균열을 통과하는 양상이 실험값과 동일함을 확인하였다. 균열의 전파에 직접적인 영향을 미치는 요소인 최대수평응력 방향, 균열면의 마찰계수, 자연균열의 방향성에 대한 민감도 분석 결과, 이론적 기준에 적합하게 균열의 전파 방향과 통과 여부가 결정되는 것으로 나타났다. 기존의 수직 판형 균열 전파 모델과 본 모델을 비교하여 균열의 연결성과 유정 자극부피 측면에서 차이가 있음을 확인하였다.

• Computers and Concrete
• /
• 제15권2호
• /
• pp.199-213
• /
• 2015

The residual fracture toughness of post-fire normal-strength concrete subjected up to $600^{\circ}C$ is considered by the wedge splitting test. The initial fracture toughness $K_I^{ini}$ and the critical fracture toughness $K_I^{un}$ could be calculated experimentally. Their difference is donated as the cohesive fracture toughness $K_I^c$ which is caused by the distribution of cohesive stress on the fracture process zone. A comparative study on determining the residual fracture toughness associated with three bi-linear functions of the cohesive stress distribution, i.e. Peterson's softening curve, CEB-FIP Model 1990 softening curve and Xu's softening curve, using an analytical method is presented. It shows that different softening curves have no significant influence on the fracture toughness. Meanwhile, comparisons between the experimental and the analytical calculated critical fracture toughness values further prove the validation of the double-K fracture model to the post-fire concrete specimens.