• Analytical Science and Technology
• /
• v.20 no.2
• /
• pp.124-130
• /
• 2007

In this study, we present the preparation and characterization of oxidized fullerene and fullerene dimer [$C_{120}$]. From the XRD data, other weak peaks with pristine fullerene [$C_{60}$] peaks were observed in the X-ray diffraction patterns for fullerene dimer [$C_{120}$]. SEM micrographs for the fullerene dimer [$C_{120}$] indicated that practically all the surface state was shown the drastic morphology changes and its outer surface is clearly visible and resulted in clogging and frost-like formation. From the MALDI-TOF mass spectra, the differences in the spectra recorded on two kinds of fullerene are due to the oxidation including chemical bonding and bridging between the $C_{60}$ molecules. We also obtained additional information from FT-IR spectra on functional component on the chemically modified surface of oxidized fullerene and fullerene dimer [$C_{120}$].

• Elastomers and Composites
• /
• v.45 no.2
• /
• pp.74-79
• /
• 2010

In this review, the properties of buckminsterfullerene and its organic and polymeric reactions were focused. In addition, polymer blending with $C_{60}$ will be briefly introduced. As soon as $C_{60}$ was discovered, chemists put their efforts to explore its reactivity with other compounds. The knowledge of the organic reactions with $C_{60}$ was extended to construct different types of fullerene polymers such as side chain fullerene polymers, main chain fullerene polymers, star shaped fullerene polymers, and dendritic fullerene polymers.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.400-401
• /
• 2008

전기영동형 전자종이 디스플레이의 새로운 소재로써 $C_{60}$(fullerene)와 같은 나노 입자를 포함하는 새로운 전기영동 입자를 제조하였다. 본 연구에서는 안정제로 poly(vinyl pyrrolidone)(PVP)를 사용하여 fullerene을 포함하는 styrene emulsion을 안정화 한 후 라디칼 중합을 통해 fullerene이 포함된 polystyrene microemulsion particles을 제조 합으로써 입자의 분산안정성을 높이고 전기영동에 따른 입자의 움직임을 최적화하도록 하였다. 이 실험에서는 fullerene의 양에 따라 제조된 입자의 크기와 입자 분포를 관찰하였다. 입자의 크기와 입자 분포는 주사형 전자현미경 (SEM) 을 이용하여 확인하였다. 또한 fullerene-PS 입자의 구조 분석과 특성평가를 위해서 FT-IR를 측정하였고, 입자의 열적 성질을 위해 TGA를 측정하였다.

• Carbon letters
• /
• v.10 no.4
• /
• pp.325-328
• /
• 2009

This cycloaddition of [70]fullerene with methyl azidoacetate in benzene under ultrasonic irradiated condition afforded the closed [5,6]-bridged aziridino[70]fullerene derivative, which was unusual product of cycloaddition to the 5,6-junction of fullerene. Its structure was determined by FAB-MS, UV-vis, $^1H-$ and $^{13}C$-NMR spectral data. The closed [5,6]-bridged aziridino[70]fullerene-functionalized gold nanoparticle films were self-assembled using the layer-by-layer method on the reactive of glass slides functionalized with 3-mercaptopropyl trimethoxysilane. The functionalized glass slides were alternately soaked in the solution containing closed the [5,6]-bridged aziridino[70]fullerene and 4-aminothiophenoxide/hexanethiolate-protected gold nanoparticles. The closed [5,6]-bridged aziridino[70]fullerene-functionalized gold nanoparticle films have grown up to 5 layers depending on the immersion time. The self-assembled nanoparticle multilayer films were characterized using UV-vis spectroscopy showed that the surface plasmon band of gold at 527 nm gradually became more evident as successive layers were added to the films.

• Toxicological Research
• /
• v.26 no.4
• /
• pp.267-273
• /
• 2010

As the use of carbon fullerene increases in the chemical industry, the concern over its biological and toxicological effects is also increasing. In this study, the suspension of carbon fullerene (C60) in phosphate buffered saline was prepared and toxicity was investigated using cultured RAW 264.7 and in intraperitoneally injected mice, respectively. The average size of carbon fullerene in the suspension was $53.7{\pm}26.5nm$ when determined by particle size analyzer. Cell viability was significantly decreased by the exposure of carbon fullerene ($0.25\sim2.00\;{\mu}g/ml$) for 96 hrs in the cultured RAW 264.7 cells. Intracellular reduced glutathione (GSH) level was also decreased compared to the level of the non-treated control group during the exposure period, while the level of nitric oxide was increased. When mice were intraperitoneally injected with carbon fullerene, serum cytokine levels of IL-1 and IL-6 were increased with the increased expression of inflammatory genes in peritoneal macrophage and T cell distribution in blood lymphocytes. The results suggested inflammatory responses were induced by carbon fullerene.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.5
• /
• pp.908-916
• /
• 2010

Fullerene-60 nanoparticles were used for studying their effect on the low-density polyethylene (LDPE) biodegradation efficiency of two potential polymer-degrading consortia comprising three bacterial strains each. At a concentration of 0.01% (w/v) in minimal broth lacking dextrose, fullerene did not have any negative influence upon the consortia growth. However, fullerene was found to be detrimental for bacterial growth at higher concentrations (viz., 0.25%, 0.5%, and 1%). Although addition of 0.01% fullerene into the biodegradation assays containing 5mg/ml LDPE subsided growth curves significantly, subsequent analysis of the degraded products revealed an enhanced biodegradation. Fourier transform infrared spectroscopy (FT-IR) revealed breakage and formation of chemical bonds along with the introduction of ${\nu}C$-O frequencies into the hydrocarbon backbone of LDPE. Moreover, simultaneous thermogravimetric-differential thermogravimetry-differential thermal analysis (TG-DTG-DTA) revealed a higher number of decomposition steps along with a 1,000-fold decrease in the heat of reactions (${\Delta}H$) in fullerene-assisted biodegraded LDPE, suggesting the probable formation of multiple macromolecular byproducts. This is the first report whereby fullerene-60, which is otherwise considered toxic, has helped to accelerate the polymer biodegradation process of bacterial consortia.

• Korean Journal of Metals and Materials
• /
• v.48 no.7
• /
• pp.674-682
• /
• 2010

Fe-fullerene/$TiO_2$ composite photocatalysts were prepared with titanium (IV) n-butoxide (TNB) by a sol-gel method. The samples were characterized by scanning electron microscopy (SEM), Transmission electron microscope (TEM), specific surface area (BET), X-ray diffraction analysis (XRD) and energy dispersive X-ray spectroscopy (EDX). The photocatalytic activities were evaluated by the photocatalytic degradation of methylene blue (MB) solution. XRD patterns of the composites showed that the Fe-fullerene/$TiO_2$ composite contained a typical single and clear anatase phase. The surface properties shown by SEM present a characterization of the texture on Fe-fullerene/$TiO_2$ composites and showed a homogenous composition in the particles for the titanium sources used. The EDX spectra for the elemental identification showed the presence of C and Ti with strong Fe peaks for the Fe-fullerene/$TiO_2$ composite. From the photocatalytic results, the excellent activity of the Fe-fullerene/$TiO_2$ composites for degradation of methylene blue under UV light irradiation could be attributed to both the effects between photocatalytic reaction of the supported $TiO_2$, decomposition of the organometallic reaction by the Fe compound and energy transfer effects such as electron and light of the fullerene.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.12
• /
• pp.1850-1854
• /
• 2004

Recently a fullerene isoxazoline was reported as an example for nanoscale connectors in molecular electronic devices. The construction of nanoscale devices is a potentially important area of technology. By using the semiempirical PM3 calculation, we optimized the structures for two fullerene isoxazoline derivatives and thirteen regioisomers of the second addition of a nitride oxide to a fullerene isoxazoline derivative. Our results suggest that fullerene isoxazoline derivatives could be used as nanoscale connectors with the possibility of attaching of spacer units in a specific angle arrangement.

• Elastomers and Composites
• /
• v.54 no.3
• /
• pp.252-256
• /
• 2019

Fullerene oxide[$C_{60}(O)_n$, ($n{\geq}1$)] was synthesized by dissolving fullerene[$C_{60}$] and 3-chloroperoxybenzoic acid in toluene under refluxing condition for 5 h. Hybrid fullerene oxide-silver nanoparticle composites were synthesized by dissolving fullerene oxide and silver nitrate[$AgNO_3$] in diethylene glycol under ultrasonic irradiation for 3 h. The synthesized hybrid nanocomposites were characterized by X-ray diffraction, scanning electron microscopy, and ultraviolet-visible[UV-vis] spectroscopy. The catalytic activity for the reduction of various nitroanilines[NAs] was identified by UV-vis spectrophotometer. The efficiency of the catalytic reduction by the synthesized hybrid nanocomposites has an order of 4-NA > 2-NA > 3-NA.

• Elastomers and Composites
• /
• v.51 no.1
• /
• pp.49-55
• /
• 2016

Nanosized cobalt disulfide ($CoS_2$) particles were synthesized with 0.08 M cobalt chloride hexahydrate ($CoCl_2{\cdot}6H_2O$) and 0.2 M sodium thiosulfate pentahydrate ($Na_2S_2O_3{\cdot}5H_2O$) dissolved in distilled water under microwave irradiation. $[C_{60}]Fullerene-CoS_2$ nanocomposites were prepared with nanosized $CoS_2$ particles and [$C_{60}$]fullerene as heated by $700^{\circ}C$ for 2 h in an electric furnace. X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) identified the heated $[C_{60}]fullerene-CoS_2$ nanocomposites. Heated $[C_{60}]fullerene-CoS_2$ nanocomposites were investigated the activity of photocatalytic degradation as a catalyst in various organic dyes like acid yellow 23, methylene blue, methyl orange, and rhodamine B with ultraviolet light at 254 nm by UV-vis spectrophotometer.