• 한국전산유체공학회지
• /
• 제19권3호
• /
• pp.44-51
• /
• 2014

Considering the importance of the detailed resolution of the reacting flow field inside a gasifier, the objective of this study lies on to investigate the effect of important variables to influence on the reacting flow and thereby to clarify the physical feature occurring inside the gasifier using a comprehensive gasifier computer program. Thus, in this study the gasification process of a 1.0 ton/day gasifier are numerically modeled using the Fluent code. And parametric investigation has been made in terms of swirl intensity and aspect ratio of the gasifier. Doing this, special attention is given on the detailed change of the reacting flow field inside a gasifier especially with the change of this kind of design and operation parameters. Based on this study, a number of useful conclusions can be drawn in the view of flow pattern inside gasifier together with the consequence of the gasification process caused by the change of the flow pattern. Especially, swirl effect gives rise to a feature of a central delayed recirculation zone, which is different from the typical strong central recirculation appeared near the inlet nozzle. The delayed feature of central recirculation appearance could be explained by the increased axial momentum due to the substantial amount of the presence of the coal slurry occupying over the entire gasifier in gasification process. Further, the changes of flow pattern are explained in detail with the gasifier aspect ratio. In general, the results obtained are physically acceptable in parametric study.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.368-371
• /
• 2008

The optimal operation condition of gasifier is one of the most important parameters to increase efficiency and reliability in IGCC plant. Also the prediction of the syngas composition and quantity must be predicted to carry out process design of the gasification plant. However, the gasifier process licensor are protective with information on process design and optimal gasifier design conditions. So, the most of process studies in the engineering company for gasification plant have carried out to look for key parameters and optimal design conditions using several prediction methods. In this paper, we present the estimated preliminary optimal operation condition of the 300MW Demonstration Entrain Flow Gasifier using Aspen Plus. The gasifier operation temperature considering slag flow was predicted by FactSage software and Annen Model.

• 한국수소및신에너지학회논문집
• /
• 제26권6호
• /
• pp.567-580
• /
• 2015

In order to select an optimum gasifier for specific low rank coal, evaluation elements were studied by analyzing characteristics of low rank coal compared with those of high rank coal and the effects of each gasifier type in accordance with the characteristics. And syngas composition calculation model was made on the basis of thermochemical equilibrium to quantify some of the evaluation elements. And then the suitable gasifier was selected for a kind of Indonesian low rank coal through this syngas composition calculation model and the evaluation elements of selecting gasifier.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2000년도 춘계 학술발표회 논문집
• /
• pp.43-50
• /
• 2000

The flow field of a 1 Ton/Day entrained-flow gasifier constructed in KIER was numerical simulate in this paper. The standard $k-{\varepsilon}$ turbulence model and simple procedure was used with the Primitive-Variable methods during computation. In order to find the influence factors of the flow field which may have great effects on coal gasification process inside gasifier, difference geometry parameters at various operating conditions were studied by simulation methods. The calculation results show that the basic shape of the flow field is still parabolic even the oxygen gas is injected from the off-axis position. There exist an obvious external recirculation zone with a length less than 1.0m and a small internal recirculation region nears the inlet part. The flow field inside the new gasifier is nearly similar as that of the old 0.5T/D gasifier at same position if the design of burner remains unchanged.

• 한국수소및신에너지학회논문집
• /
• 제21권5호
• /
• pp.442-451
• /
• 2010

This paper describes the calculation method to obtain the product composition of coal pyrolysis at high pressure and high temperature. The products of coal pyrolysis should be determined for the coal gasifier simulation, and this is the first step of the coal gasifier simulation. The pyrolysis product distribution greatly affects the coal gasifier efficiency such as carbon conversion, cold gas efficiency and the syngas composition at the outlet of the gasifier. The present calculation method is based on the coal ultimate/proximate analysis and several correlations among gasifier pressure, coal properties and pyrolysis products. The calculated products for 5 coals have been compared with those from the commercial pyrolysis model.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.586-591
• /
• 2005

Syngas or fuel gas production through biomass gasification is a century old technology. Biomass gasification is getting more and more interest recently as one of competitive renewable energy technologies. It does not contribute to increasing greenhouse gases(GHG). A down-draft gasifier was designed and tested for syngas quality using different fuel sets in this study. The gasifier was of about 100kW capacity. Tests were conducted at air flow rates ranging from 10 to $60m^3/hr$. Fuels tested included wood chips and wood char. The results showd that gas quality in terms of flammability was reasonably good when the temperatures were over $600^{\circ}C$ inside the gasifier. Although $800^{\circ}C$ or higher is recommended, gas quality was reasonably good. If insulation was provided outside the gasifier, the temperature would increase. When wood chips were used, the temperature was below $600^{\circ}C$ and gas quality was not good. It seemed that calorific values of fuel and height of reduction zone in the gasifier are very important. The results of the tests would provide important information for designing more improved gasifier and its operation.

• 대한기계학회논문집B
• /
• 제36권8호
• /
• pp.865-871
• /
• 2012

최근 고유가와 천연가스 수요 상승에 따른 가격 상승으로 인하여 상대적으로 낮은 가격의 석탄을 이용한 에너지 생산이 주목을 받고 있다. IGCC를 비롯한 석탄가스화 분야는 오래전부터 청정화석연료를 이용한 유망한 기술로 각광받아 왔었다. 본 연구에서는 이러한 석탄가스화 기술을 이용하여 합성천연가스를 생산하는 실제 프로젝트 개발단계에서 석탄가스화기 선정을 위한 기술적 검토를 수행하였다. 합성천연가스 생산에 적합하다고 판단되는 가스화기로써 고정층 슬래그 가스화기, 습식 분류층 가스화기, 건식 분류층 가스화기를 검토 대상으로 선정하여 연구를 진행하였다. 선정된 가스화기별 주요 공정 특징 및 성능에 대하여 검토하였으며, 종합검토내용을 토대로 합성천연가스 생산시 석탄가스화기 선정방향에 대하여 제시하였다.

• 공업화학
• /
• 제22권5호
• /
• pp.566-574
• /
• 2011

석탄가스화기는 석탄가스화복합발전과 석탄간접액화 공정에서 고효율을 얻기 위한 중요한 설비 중 하나이다. 현재 여러 종류의 석탄가스화기가 성공적으로 사용되고 있지만, 간단하면서도 신뢰도를 높일 수 있는 다양한 설계 변경이 가능하다. 건식 분류층 가스화기 4종류의 형태를 제시하고 이들을 체류시간, 가스화기 출구 합성가스의 온도, 합성가스 조성을 중점으로 비교하였다. 설계개념이 적정한지를 우선 파악하고자 반응을 배제한(cold-flow) CFD 해석을 먼저 수행하였고, 실제 가스화기 조건을 반영한 화학반응이 고려된(hot-flow) 해석을 수행하여 비교하였다. 가스화기 설계에 CFD를 적용하는 데는 슬랙의 거동과 슬랙탭 설계 등 측면에서 제한적이기는 하지만, 다양한 설계개념 중에서 가능성이 높은 가스화기 형태의 범위를 좁히는 데 매우 유용하게 사용될 수 있다.

• 에너지공학
• /
• 제2권3호
• /
• pp.276-284
• /
• 1993

분류층 가스화기를 대상으로하여 석탄가스화 복합발전 시스템을 위한 가스화반응 모델링을 수행하였다. 가스화기 내에서의 가스화반응은 화학평형상태에 있다고 가정하여 Gibbs 자유에너지 최소화법을 이용하였다. 물질수지와 열수지를 동시에 고려한 모델링 결과와 실제 가스화기 실험자료를 비교하여 모델의 신뢰성을 확인하였다. 이를 토대로 가스화기에 공급되는 산화제의 양이 평형조성에 미치는 영향과 가스화기의 온도, 그리고 석탄종류가 가스화반응에 미치는 영향에 대해 알아보았다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.231-233
• /
• 2012

Circulating Fluidized Bed (CFB) is a technically and economically proven technology for boiler systems and large CFB coal boilers are making inroads into the domestic power boiler market. For biomass gasification, it is also considered as a very promising technology for commercial. Due to the lack of experiences of a large scale CFB gasifier, however, any large scale CFB gasifiers are hard to in Korea in spite of fast-growing demand of domestic market. In this study, a 3 $MW_{th}$ CFB gasifier was developed for biomass gasification. The CFB gasifier consists of interconnected fast and bubbling fluidized bed reactors including unique features for in-situ tar removal. Various numerical and experimental approaches will be presented such as basic modeling works, investigation of hydrodynamics with a cold model, computational particle fluid dynamics and experiments in the 3 MWth gasifier.