• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.4
• /
• pp.1118-1128
• /
• 2015

In the midst of the advancement of global economic trade restrictions, the internationalization of domestic agriculture, which has occurred at a time of crisis in the industry, has presented an opportunity for Korea's agricultural products to be exported overseas. In particular, from 2015, after favorable outlooks for Korean rice, it is expected that the domestic agricultural industry is in a strong position to play a major role in export markets. Due to this, among existing measures targeting the import of rice, increasing domestic measures to boost rice exports and establish an effective operating plan are being pursued. However, until now, appropriate measures targeting domestic rice markets have not been found. In addition, domestic grain piers, which are currently used exclusively for the import of grain, do not have sufficient capacity to handle export operations. Therefore this paper will examine the current status of domestic grain piers, and will suggest a operating plan in grain terminal for the export of grain in order to successfully bring domestically produced rice to foreign markets. The conclusions drawn from this paper are designed to be used as a basic application for the operational plan of grain piers for the purpose of increasing domestic rice exports.

• Journal of Biosystems Engineering
• /
• v.15 no.1
• /
• pp.1-13
• /
• 1990

Aerodynamic property is the most important factor in designing the pneumatic separator and handling equipment for grains and seeds. Particularly the correct information about the terminal velocities of the corresponding grains and seeds is indispensible. However, a few studies with relation to the terminal velocities of grains and seeds were conducted in this country, even though the terminal velocities of the domestic grains and seeds are required to design those equiments which can be used for the domestic grains and seeds having specific aerodynamic properties. In this study, the terminal velocities for four varieties of varley and six varieties of paddy were investigated by means of two different methods, the suspension method and the drop method in an upward current of air. For measuring the terminal velocities, the vertical wind tunnel which had been examined about the uniform air flow in the previous study was used. In addition, the effect of the size of grains and the moisture content of grain kernel on the terminal velocity was examined. The following conclusions were derived from the study : 1. The different terminal velocities of grains are resulted from the different measuring methods. The terminal velocity measured by the drop method is smaller than that by the suspension method. It is considered that the difference in the terminal velocities is caused by the difference in the projection area of grain which is faced to the air stream. 2. The terminal velocity of grain increases as the size and the moisture content of the kernel increase. 3. The linear regression equations for the terminal velocities of grains were derived in terms of the moisture content of grains by the variety of grains and the measuring method. Also, the linear regression equations for the terminal velocity, based on the weighted size of grains, were derived in terms of the moisture contents of granis.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.60-61
• /
• 2013

One of the most important indicators for measuring service level and productivity of the port may be a demurrage rate. Currently, in the case of grain terminal of Busan North Port, demurrage rate are recognized at a very high level, in order to improve this, it is tilted more effort operational. In order to reduce the demurrage, there is a way expansion of facility of hardware, such as the replacement of aging equipment, and how manipulative assignment rules of the apparatus of the operation on the software side, such as changing the order of facility allocation. If the financial reasons are out of question, it is possible to expand to reduce the demurrage rate by operational way. Therefore this paper deals with how to operate some of the allocation rules and silo allocation rules of equipment to reduce the work hours with model and how to operate basic equipment and grain terminal of Busan North Port want to be seen by comparative analysis.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.17 no.4
• /
• pp.3980-3990
• /
• 1975

This study was carried out to develop a method of grain drying ststem that can be done by forcing the heated-air directly into the grains within the sack. The air duct was pushed into the central position of the grain-deposited sack and the heated-air was forced to flow in the radial direction. The system is referred here as the unit sack drying system. At a first step of this study, an air flow resistance tester was constructed to measure the resistance of air flow to grains in cooperated with some different sack materials, the sack materials, the tested were rice-straw bag, sack of polyethylene film, and jute sack In addition, unit sack drying system was constructed to investigate the drying characteristics of the dryer. on this dryer, two kind of terminal air ducts were attached and tested to examine its effects on uniform drying, and also, aseries of drying test was performed to trace the effect of increasing air flow rate on uniform drying. The results are as follows: 1) Resistance of air flow for each sack material was increased almost proportional to the increasing rate of air flow. Experimental data showed little significant differences of the air flow resistance among the materials. 2) From the comparison with air flow resistance of sack material and that of roughrice, it was indicated that airflow resistance of sack material was much higher than that of rice rough Therefore, in the unit sack drying sysle in which air flow is destined to face the sach material after leaving the grain, it was suggested that air flow would be inuniform to each part of grain within sack because of much higher air flow resistance of sack material than that of grain, and the fact would results inuniform grain drying. 3) Drying test on the unit sack drying system in cooperated with different type of terminal air ducts showed that high speed air is better for uniform drying than in high pressure. with the drying system which was assembled with the air ducts delivering higher speed air, there also involved a problem of significant inuniform drying. Therefore, any means to improve the inuniform drying should be undertaken for practical use. 4) A series of drying test with in creasing air flow rate resulted that increasing air flow rate in the unitsack drying system gave little effect on uniform drying, therefore, it is recommened to change its drying system for drying grain uniformly.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.26 no.3
• /
• pp.233-238
• /
• 1981

This trial was conducted to find out some tendencies in variations of grain chalkiness according to their position on a panicle. To know the varietal character in variations of chalkiness and their relations with grain weight, distribution of chalkiness in bulk seed was observed for four varieties. Milyang 23, relatively clear variety and SR601-25-1, much chalky variety were checked for the grain chalkiness in their positions on the panicle. The results obtained are summerized as follows: Rice chalkinss were varied in degree from 0 (clear) to 9 (chalky) within a variety. Large number of grains were distributed to clear for clear variety and to chalky for chalky variety, but almost equal number of grains were distributed to all degree of chalkiness for intermediate chalky variety. For the relationship between degree of chalkiness and grain weight, chalky grains founded in clear variety and clear grains founded in chalky variety decreased in weight, while in intermediate chalky varieties both grains of clear and chalky decreased. There were great varietions in grain chalkiness on a panicle for both clear and chalky varieties. There was no definite trend in distribution of chalkiness except that the first primary branch and terminal grains in every primary branch showed clear in Milyang 23. Mean degree of grain chalkiness was relatively high in grains of middle part of panicle only from Milyang 23.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.4
• /
• pp.403-408
• /
• 1987

The milled rice yield of the fertilized Zeolite in the sandy loam as 542 Kg/10a was increased by 11% compared with the check plat as a standard cultivation. Significant positive correlations of that were found between grain yield/plant and panicle/total weight ratio or average weight of panicle, while lower correlations between ratio of riqened grains and grain yield/ plant. But significant negative correlations were found between 1,000-grain weight of rough and 4th. 5th internode/culm length ratio. It was reavealed that there were higher direct effects for ratio of ripened grains and spikelets/panicle affecting grain yield/plant through path analysis among the yield components. Moreover, organic dry matter production at 35 days after heading were heavier by 26% in active leaves, 19% in stem + leaf sheath, and 5% in panicle, respectively. Ratio of settled spikelets on the terminal of primary rachis-branch was 47% to total spikelets, and 37% in half-upper of that, moreover many spikelets settled on the terminal of rachis. Therefore, it was recognized that there were a dominant effect of apical glumous flower by fertilized Zeolite.

• Korean Journal of Agricultural Science
• /
• v.47 no.4
• /
• pp.717-726
• /
• 2020

The physical characteristics of the major varieties of perilla were analyzed to use as basic data for the design of a high-quality, high-efficiency perilla cleaner and stone separator. Because the size, thousand-grain weight, angle of repose, angle of friction, bulk density and terminal velocity of perilla have significant differences according to the perilla variety, the different of characteristics by variety should be considered for performance improvement of a perilla cleaner and stone separator. Therefore the cleaner and stone separator using a sieve could be improved by the application of a detachable sieve or by using equipment such as a 2 - 3 stage sieve and regulating the slope. Moreover, because differences in the terminal velocity occur due to the differences in the size and thousand-grain weight according to the perilla variety, a blower with an adjustable fan speed was considered for the design of the improved cleaner. Additionally, it was shown that the length of perilla has the greatest correlation based on a comparison of the coefficients of the other characteristics. Accordingly, the length of perilla could be used as a major factor for the fine adjustment and parts replacement of the device. These results can be used as basic data for a high-quality, high-efficiency perilla cleaner and stone separator. In the future, the development of the machine and follow-up studies based on the basic data are needed to determine the optimized operating conditions and mechanism of action.

• Journal of Biosystems Engineering
• /
• v.13 no.3
• /
• pp.32-43
• /
• 1988

This study was attempted to investigate the pneumatic separation on separating unit of a combine harvester. The aerodynamic characteristics of threshed materials were analyzed by experiments. The air velocity distribution within the separation chamber was measured for various speeds of the winnower and suction fans to find out the operational and design conditions of the separating unit which would serve for reducing the grain loss from chaff outlet. The results of study arc summarized as follows: 1. Based on the separation curve of threshed materials analyzed, it was shown that three different kind. of materials-kernels, straw chaff, and leaf chaff were as a whole able to be separated pneumatically, regardless of varieties. However, a small amount of the separation grain loss may be expected to occur if the complete separation between kernels and straw chaff would be undertaken because some portion of their separation curve were overlapping. 2. The analysis of air velocity distribution showed that the separation chamber may be divided into two regions, the discharging and separating. The air velocity of the discharging region was 5-15 m/s and that of the separating region 2-5 m/s. 3. The air movement of the separation chamber may be a turbulence flow, being its speed became greater as it moves from the left to the right section of the separation chamber. The equi-speed line. of air flow had a steep gradient in between the discharging and the separation regions. The air velocity in the discharging region was much higher than the terminal velocity of kernels, because of which those kernels appearing in the region could be possibly exhausted as the grain loss from the chaff outlet. 4. The motion trajectory of threshed material in the separating region was dominantly affected by the winnower fan, on the other hand, its motion in the discharging region was affected by suction fan. 5. The grain loss from the chaff outlet was affected greatly by the winnower fan and the trace of kernel movement. It was observed that the optimum working speed to give minimum grain loss from chaff outlet for the combine tested should be maintained at 950~1,150 rpm for the winnower fan and 1,850 rpm for the suction fan. 6. It was shown that a large portion of grain loss from chaff outlet may occur when the kernels may bump against a portion of separation chamber wall and those kernels thus scattered into the discharging region were sucked by the suction fan. It was accordingly recommended that a new design of the wall of separation chamber so as to bump down kernels may be necessary to reduce grain loss from the chaff outlet.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.390.1-390.1
• /
• 2016

The present work explains the interfacial energetics of all oxide transparent photodiodes. The optical, structural and morphological of copper oxides were systematically analyse by UV-Visible spectrometer, X-Ray diffraction, Raman spectroscopy, Scanning electron microscopy (SEM) and Atomic force microscopy measurements (AFM). The UV-Visible result exhibits optical bandgap of Cu2O and CuO as 2.2 and 2.05 eV respectively. SEM and AFM result shows a uniform grain size distribution in Cu2O and CuO thin films with the average grain size of 45 and 40 nm respectively. The results of Current-Voltage and Kelvin probe force microscope characteristics describe the electrical responses of the Cu2O/ZnO and CuO/ZnO heterojunctions photodiodes. The obtained electrical response depicts the approximately same knee voltages with a measurable difference in the absolute value of net terminal current. More over the present study realizes the all oxide transparent photodiode with zero bias photocurrent. The presented results lay the template for fabricating and analysing the self-bias all oxide transparent photodetector.

• Transactions of Materials Processing
• /
• v.31 no.4
• /
• pp.240-245
• /
• 2022

In this study, to achieve good electrical conductivity of a charging terminal component in electric vehicles, we investigated the microstructure evolution of pure-Cu subjected to metal injection molding by controlling the sintering variables, such as temperature and time. Thus, three samples were sintered at temperatures ranging from 1000 ℃ to 1050 ℃ near to the melting temperature of 1085 ℃ for 1 and 10 h after thermal evaporation of binder at 730 ℃. Both procedures were made using a unified furnace under Ar+H₂ gas with high purity. The structural observation displayed that the grain size as well as the compactness (a reciprocal of porosity) increased simultaneously as temperature and time increased. This gave rise to high thermal conductivity of 90% IACS together with high density, which was mainly attributed to decrease in fractions of grain boundaries and micro-pores working as effective scattering center for electron movement.