• Journal of Wetlands Research
• /
• v.18 no.1
• /
• pp.39-44
• /
• 2016

The reuse of spent coffee powder has been researched for environmental engineering applications such as adsorbents of organic/inorganic pollutants. In this study adsorption equilibrium tests and adsorption kinetics tests for the removal of aqueous organic pollutant (methylene blue) were conducted using spent coffee powder, granular activated carbon, and powdered activated carbon. It was found that the maximum adsorption capacity of three adsorbents followed the order of powdered activated carbon (178.6 mg/g) > spent coffee powder (60.6 mg/g) > granular activated carbon (15.6 mg/g). The results of adsorption kinetics tests also indicated that spent coffee powder had higher kinetic parameters than granular activated carbon for pseudo 1st and 2nd order kinetics. The high performance of spent coffee powder might be due to its porous surface like those of granular and powdered activated carbons and smaller particle size comparing with granular activated carbon.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.6
• /
• pp.264-269
• /
• 2021

In this study, amorphous aluminum silicate powder was prepared using co-precipitation method, and the influence of spray-dried aluminum silicate granular powder was analyzed and optimized by controlling the amount of aluminum silicate powder and dispersant added to the slurry. As a result, granular powder was optimally produced under the conditions of powder content of aluminum silicate slurry of 27.5 wt% or less, dispersant addition amount of 0.8 wt% or more, pH 6~9. An average particle size of granular powder showed approximately 14 ㎛ at the powder contents of 20 and 22.5 wt% of the slurry, and approximately 19 ㎛ at the powder contents of 25 and 27.5 wt% of the slurry.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.189-190
• /
• 2006

During cold compaction processes loose powder is pressed under tooling action in order to produce complex shaped engineering components. Here, the analysis of the plastic deformation of granular packings is of fundamental importance to the development of computer simulation models. Powders can be idealized by packing discrete particles, where each particle is a sphere meshed with finite elements. The pressing of a body centered cubic packing was compared with numerical prediction and experimental data. The global response was expressed in force-displacement curve, and the accuracy of the numerical models analyzed for high relative densities up to 0.95.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.19-20
• /
• 2021

In order to reduce the emission of harmful substances that degrade indoor air quality, the Ministry of Environment strengthened the standards for the content of VOCs in paints to supply and sell eco-friendly paints. In this related study, an eco-friendly paint mixed with a powder-type absorbent material was prepared and its characteristics were reviewed. As the amount of powder-type absorbent material increased, the workability (viscosity, peeling, etc) decreased. Accordingly, this study aims to examine which particle size is suitable according to the particle size of the granular adsorbent while improving the problem of the powdery adsorbent by using the granular adsorbent. As an experimental plan, the particle size of granular activated clay is selected to be 0.250, 0.425, 0.710(mm), and the decrease rate of VOCs concentration and impact resistance are reviewed. As a result of the experiment, as the particle size of the granular activated clay increased, the decrease rate of the VOCs concentration increased and the impact resistance improved. Therefore, considering the problems that occur after actual painting, the particle size of granular activated clay of 0.425mm is suitable.

• Journal of Powder Materials
• /
• v.27 no.6
• /
• pp.468-476
• /
• 2020

The bone cement used for vertebroplasty must be sufficiently injectable. The introduction of granules reduces the amount of liquid required for liquefaction, implying that higher fluidity is achieved with the same amount of liquid. By employing β-tricalcium phosphate granules with an average diameter of 50 ㎛, changes in injectability are observed based on the paste preparation route and granular fraction. To obtain acceptable injectability, phase separation must be suppressed during injection, and sufficient capillary pressure to combine powder and liquid must work evenly throughout the paste. To achieve this, the granules should be evenly distributed. Reduced injection rates are observed for dry mixing and excessive granular content, owing to phase separation. All these correspond to conditions under which the clustered granules weakened the capillary pressure. The injected ratio of the paste formed by wet mixing displayed an inverted U-type shift with the granular fraction. The mixture of granules and powder resulted in an increase in the solid volume fraction, and a decrease in the liquid limit. This resulted in the enhancement of the liquidity, owing to the added liquid. It is inferred that the addition of granules improves the injectability, provided that the capillary pressure in the paste is maintained.

• Journal of Powder Materials
• /
• v.10 no.5
• /
• pp.349-352
• /
• 2003

This study examined the correlation of various operational factors including reaction temperature and the quantity of reductant and diluent with the characteristics of powder using $K_2$ TaF$_{7}$ as feed materials, Na as a reductant and KCl/KF as a diluent. Also to control the particle size and shape, external supply system developed, it can provide a feed material and a reductant at a fixed quantity and evaluated the characteristics of tantalum powder. When the external supply system was applied instead of the batch type process that charges feed material, reductant and diluent at the same time, it was possible to induce regular reduction reaction between feed material and reductant, which increased the recovery rate and reduced the mixture of impurities. In particular, the application of the external supply system enabled the control of reaction temperature and reaction speed according to the feeding rate of feed material during reduced reaction, and resultantly it enabled the manufacturing of granular-shaped powder with a regular granularity of 2∼3 ${\mu}{\textrm}{m}$ and purity of 99.5%.

• The Korean Journal of Pesticide Science
• /
• v.14 no.3
• /
• pp.219-225
• /
• 2010

The solubility in water of granular pesticides is not equal because the difference of methods of producing a granular pesticide. This study was conducted to investigate fish acute toxicity of butachlor 5% GR, fipronil 0.4% GR by impregnation and carbosulfan 3% GR, diazinon 0.4% GR by coating, using carp (C. carpio), medaka (O. tatipes) and loach (M. anguillicaudatus). The test solution of each pesticide was prepared by direct addition of granular pesticide and add after grinding granular pesticide to powder in test water, We also investigated $LC_{50}$ and residual concentration until 96 hours. Test results were appeared that the treatment of powder was 1.2~4 time higher than granular and toxicity increased clearly according to elapsed time, And the residual amounts by time were detected much at early time in the powder treatment of butachlor GR and diazinon GR. Conclusively, fish acute toxicity and residual concentration in test solution appeared higher in the powder treatment than treat granular form directly in water. Also, 96 hours toxicity values were stable comparatively and the error is less than 48 hours.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.206-211
• /
• 2020

Tungsten alloys are used widely in general industrial fields, but they are difficult to cast, so products are manufactured using powder metallurgy. In this study, a mixed powder of tungsten, nickel, and iron homogenized using a ball mill was added to pure water as a solvent, and PVA as a binder was added to prepare a spray drying mixture. The mixed liquid was prepared using a spraying machine. A study was carried out to produce a granular powder that can reduce the variations between products during the molding and sintering process of the powder metallurgy method. A preliminary experiment was conducted to confirm the influence of the variables in the granulation process. Through the preliminary test results, this experiment was performed with the volume of solvent of the spray drying the mixture as an independent variable, and granular powder having a mean particle size similar to that of the existing mass-production conditions and an increased apparent density was prepared. In addition, a pilot test was conducted for the molding and sintering process. The improved granular powder reduced the characteristic variation (weight variation) of the mass-produced product.

• Journal of the East Asian Society of Dietary Life
• /
• v.17 no.5
• /
• pp.689-695
• /
• 2007

The pine mushroom is recognized as being a valuable functional food and is considered a prized mushroom. One of the product development plans for this mushroom is a granular tea. Thus, for this study, the physical properties and sensory qualities evaluation of such a this product were measured. First, we extracted pine mushrooms at various temperatures(50, 60, 70, 80 and $90^{\circ}C$) to make a pine mushroom granular tea. The extraction yield and free amino acid content were greatest in the $50^{\circ}C$ extraction. This extract that was acquired at $50^{\circ}C$ was lyophilized and pulverized to make the granule tea. According to the results, the granular tea made from 4% pine mushroom powder had the best taste, with a Brix value of 1.9% and a pH of 4.12. The L-value of chromaticity was 49.00, the a-value -0.85, and the b-value was 1.28.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2007.11a
• /
• pp.154.1-154.1
• /
• 2007