• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.233-233
• /
• 1999

본 연구에서는 2성분계 gas(Ne+Xe)를 사용하여 기체압력(p), 진동수(f)에 따라 VUV(Vacuum Ultra Violet) spectrum 147, 173nm 파장과 IR(Infrared) spectrum 823nm, 828nm을 Vacuum Monochromator(Acton-VM 507)를 통해 측정하였다. 휘도(Luminance)와 전력(Power)측면에서 Ne+ Xe 최적의 가스 조성비를 찾기 위해서 Xe의 혼합비에 따른 IR영역인 823nm, 828nm을 측정결과, Xe 4%일 때 좋은 효율을 나타냈다. 기체압력이 200Torr에서는 Xe(3P1)에 기인하는 147nm가 주요한 파장이며, 기체압력이 400Torr, 600Torr일때는 Xe(3P2)에 기인하는 173nm 파장이 주요함을 알 수 있었다. 또한 공간 방전 이미지를 전압 pulse 인가후 ICCD Camera(V-Tek)의 Ready time, On Time을 조절하면서 50ns delay로 관측하였다. 향후 실험계획은 실제 상용화되고 있는 혼합가스 He+Ne+Xe의 조성비에 따른 자세한 실험을 할 것이다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.230-230
• /
• 1999

PDP 미세면방전에서 방전의 전기, 광학적 특성을 이해하기 위해서는 근본적으로 면방전에 대한 기초적인 이해와 연구가 뒤따라야 한다. 따라서 본 연구에서는 일차적으로 방전 전극구조에서 방전 전압변화에 가장 중요한 변수인 방전 유지 전극 간격에 대해서 구동 진동수, 유전체 두께, 전극폭, MgO 보호막 두께 등과 같은 다른 변수들은 고정시켜 놓고 방전기체종류(Ne,Xe, He)와 Xe 기체혼합 비율 (1%, 4%, 7%등)에 따라서 방전유지 전극간격(50, 100, 150, 200$mu extrm{m}$)을 변화시켜가며 실험을 수행했다. 방전 유지 전극의 간격(d)이 좁을수록 방전개시(Vf), 유지 전압(Vs)은 낮아지고 전극간격을 점차로 넓게 하면 방전개시, 유진 전압이 높아지게 되는 즉 전극 간격에 따라서 가스 압력(P)에 따른 파센 최저방전 개시전압과 최저방전 유지전압 특성곡선이 존재함을 알 수 있었다. 또한 단일종의 기체를 사용했을 때 보다는 혼합기체를 사용했을 때 Penning effect에 의해서 방전 전압이 상대적으로 낮아지는 경향을 관측 할 수 있었으며, Xe 기체 혼합 비율에 따른 방전전압 특성 또한 관측하였다.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.657-659
• /
• 1993

We have developed a repetitive TEA $CO_2$ laser excited by a magnetic switch pulse source, and have measured the laser output energy for the mixing ratio of the laser gas mixture in single pulse. As a result of experiments, we have obtained the laser output energy of 252 mJ($\eta_{intrinsic}$=7.8%) in $CO_2:N_2$:He=1:1:8(1 atm.). At a repetition-rate frequency of 10 Hz, an average laser power of 1.5 W was obtained.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.201-201
• /
• 2000

AC-PDP(Plasma Display Panel)에 사용하는 MgO 보호막의 이차전자 방출계수(${\gamma}$)는 AC-PDP의 방전특성을 결정짓는 중요한 요소이다. MgO 보호막의 이차전자 방출계수는 AC-PDP에 주입하는 기체의 종류에 영향을 받는다. 현재 AC-PDP에는 방전특성의 향상과 VUV 발생을 위하여 He, Ne, Xe 등의 혼합기체가 사용되고 있으며, N 기체를 혼합하여 사용할 경우 더 좋은 발광효율을 얻을 수 있다는 보고가 있다. 이번 실험에서는 (100) 방향으로 배향된 MgO Bulk Crystal과 MgO 보호막의 이차전자방출계수를 ${\gamma}$-FIB 장치로 N2 기체혼합비율에 따라 측정하였다. 혼합기체는 Ne=N2 이원기체를 여러 가지 혼합 비율로 변화시켜가며 실험하였다. MgO 보호막은 실제 21inch 규격의 Panel을 사용하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.424-428
• /
• 2003

We have developed the RF discharge Excited slab Waveguide $CO_2$ laser and measured the output power. We make used of concave and concave mirror, concave and convex mirror that negative branch and positive branch unstable resonator, respectively. The resonator active dimension is 2$\times$40$\times$400 mm and ratio frequency is 123 MHz. The gas mixing ratio is $CO_2$: $N_2$ : He=1 : 1 : 3. The pressure in resonator is from 10 to 60 torr and RF input power increased from 100 to 900 W. so that We obtained laser maximum output power of negative branch and positive branch resonator 50.9 W and 70.8 W and efficiency is 6.5 % and 9.2 %, respectively.

• Economic and Environmental Geology
• /
• v.40 no.5
• /
• pp.635-649
• /
• 2007

Geochemical composition, stable isotopes $({\delta}^{18}O,\;{\delta}D,\;{\delta}^{34}S)$ and noble gases(He, Ne and Ar) of nine hot spring water and three groundwater for five hot springs(Jukam, Hwasun, Dokog, Jirisan, Beunsan) from the Honam area were analyzed to investigate the hydrogeochemical characteristics and the hydrogeochemical evolution of the hot spring waters, and to interpret the source of sulfur, helium and argon dissolved in the hot spring waters. The hot spring waters show low water temperature ranging from 23.0 to $30.5^{\circ}C$ and alkaline characteristics of pH 7.67 to 9.98. Electrical conductivity of hot spring waters is $153{\sim}746{\mu}S/cm$. Groundwaters in this area were characterized by the acidic to neutral pH range$(5.85{\sim}7.21)$, the wide electrical conductivity range $(44{\sim}165{\mu}S/cm)$. The geochemical compositions of hot spring and groundwaters can be divided into three water types: (1) $Na-HCO_3$ water type, (2) Na-Cl water type and (3) $Ca-HCO_3$ water type. The hot spring water of $Ca-HCO_3$ water type in early stage have been evolved through $Ca(Na)-HCO_3$ water type into $Na-HCO_3$ type in final stage. In particular, Jurim alkaline(pH 9.98) hot spring water plotted at the end point of $Na-HCO_3$ type in the Piper diagram is likely to arrive into the final stage in geochemical evolution process. Hydrogen and oxygen isotopic data of the hot spring water samples indicate that the hot spring waters originated from the local meteoric water showing latitude and altitude effects. The ${\delta}^{34}S$ value for sulfate of the hot spring waters varies widely from 0.5 to $25.9%o$. The sulfur source of most hot spring waters in this area is igneous origin. However, The ${\delta}^{34}S$ also indicates the sulfur of JR1 hot water is originated from marine sulfur which might be derived ken ancient seawater sulfates. The $^3He/^4He\;and\;^4He/^{20}Ne$ ratios of the hot spring waters range from $0.0143{\times}10^{-6}\;to\;0.407{\times}10^{-6}\;and\;6.49{\sim}584{\times}10^{-6}$, respectively. The hot spring waters are plotted on the mixing line between air and crustal components. It means that the He gas in the hot spring waters was mainly originated from crustal sources. However, the JR1 hot spring water show a little mixing ratio of the helium gas of mantle source. The $^{40}Ar/^{36}Ar$ ratios of hot spring water are in the range from $292.3{\times}10^{-6}\;to\;304.1{\times}10^{-6}$, implying the atmospheric argon source.

• Korean Journal of Optics and Photonics
• /
• v.1 no.2
• /
• pp.155-161
• /
• 1990

A Continous wave tunable $CO_2$ laser which is the slow axial flow type was construccted for the optical pumping of methyl alcohol ($CH_3OH$) laser. The reflective grating of 100 grooveslmm and 10.6$\mu\textrm{m}$ blaze wavelength was used to select wavelength. We have investigated continous outpu: power characteristics, and then have compared tuned output power profile with the gain curve of $CO_2$ laser. The optimum condition for maxium power was found at the gas mixing ratio 1 : 3 : 10 for $CO_2: N_2$ and He. under this condition the flow rate, pressure of lasing gas and discharge current are 9.5 llmin. 14 torr, and 55 mA respectively. The maxium output power was 55 Wlm. Output power of single wavelength operation was measured on 60 individual rotation vibration transitions in the P and K branches of the 9.5$\mu\textrm{m}$ band and 10.4$\mu\textrm{m}$ band in $CO_2$. The output power profile obtained from each band is well consistent with the gain curve of $CO_2$ laser and maxium tuned output power was 20 watt.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.1
• /
• pp.102-108
• /
• 2006

On the refutation demanded for a control of various toxic substances. PCBs(poly chlorinated biphenyl) has a fatal poisonous matter in the ecosystem and the environmental pollution as it Is a kind of stable chemical substance. Especially, the gross Product of PCBs is estimated at about one million tonnage all over the world. However it is kept on storing in untreated state, then has a deterioration by the Prolonged storage and a risk of overflowing. Therefore, this research examined the fundamental characteristics of combustion and emission for the target of using the IPA (iso-propyl alcohol) solution as a part of PCBs control. IPA was filled to three kinds of Vessel, i.e. Vessel I, II, and III, and then was investigated as follows combustion shape, flame temperature. mass burning velocity, and PM(Particulate matter). A radial thermometer and a C-A thermocouple measured the flame temperature, and the optical extinction method by using He-Ne laser and the filter weight method used in the PM measurement. As a result, with an increasing of L/S ratio, the flame length become shorter and the burning velocity is more rapid, but the particulate matters is higher. It is supposed that the air flow rate is high on Vessel. and then the combustion is Promoted in the surface area of the upstream zone. The future works plan to investigate the characteristics with an using of the mixing of IPA and PCBs

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.949-951
• /
• 1992

A low pressure DC plasma jet has been used to obtain diamond films from a mixture of $CH_4$ and $H_2$ with high deposition rate (>1$\mu\textrm{m}$/min). The effects of the deposition conditions such as torch geometry, substrate temperature, gas mixing ratio, chamber pressure, axial magnetic field on the diamond film properties such as morphology, purity, uniformity of the film and deposition rate, etc. have been examined with the aid of Scanning Electron Microscopy, X-Ray Diffraction, and Raman Spectroscopy. Both the growth rate and particle size increased rapidly for low methane concentrations but saturated and the morphology changed from octahedral to cubic structure when the concentration exceeded 1.0 %. Higher growth rates (>1.5${\mu}m$/min) can be obtained by applying an axial magnetic field to the DC plasma jet. Diamond obtained from the magnetized plasma jet also shows a sharp peak at 1332.5$cm^{-1}$ in the Raman Spectra and this result implies that higher growth rate with a good quality diamond films can he obtained by applying an external magnetic field to the plasma jet.

• Korean Journal of Materials Research
• /
• v.3 no.5
• /
• pp.505-513
• /
• 1993

To make the electrophotographic photoreceptor that srnsirizes for panchromatic matcrial, the dying element of sunfasr yellow which has an absorption ivavclength at near 400nm, and $\alpha,\beta$-copper phthalocyaninc dying elements with 700nm absorption wavelength were adsorbed and then dispersed onto the zine oxide(Zn0). In ordcr to characterize rhe change In sensitivity the various binders and different mole ratio of ZnO to binder were employed in here. It was found rhat the optimum sensitivity was obtained with 5.5 ratio. I;rom the measurements of electrostatic and spectral sensitivity, it was found that the maximum photographic properties were obtained for mixing the sunfast yellow and $\beta$-copper phthalocyaninr. In this case the electrophotographic sensiri\ity was found to he $E{1:2}$= 1440 lux . sec. And also the spectral sensitivity shows that it had a good properties for panchromatic matcrial.