• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.6
• /
• pp.40-47
• /
• 1998

Drilling is an indispensable process in manufacturing of the die and mould and the other mechanical parts which needs high dimensional and surface accuracy. In this paper, a new type of drilling method was proposed in order to improve both processing efficiency and accuracy. Specifically, the helical motion using ball end mill tools, instead of normal drilling method, was applied to perform an effective hole machining. In this paper, an theoretical background of the new type of drilling method was established, and the feasibility of the proposed theory was proved by experiments, where proposed drilling process in the paper gave a different machining specification than general method did.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.4
• /
• pp.138-146
• /
• 1997

The optimal drill helix angle, point angle, and cutting conditions are recommended in the study so as to maximize the drilling performance by investigating the experimental reaults concerning with the state of chip formation, roundness of machined holes, and geometry of projected burr at hole exit, which are examined under the conditions of various helix angles, drill point angles of twist drill, cutting speeds, and feeds in operional parameters. In the easiness of chip escape, the helical type of chip is producted when a helix angle is 30$^{\circ}$, drill point angle 118$^{\circ}$, 140$^{\circ}$and feed is st between 0.1 and 0.15mm/rev. Roundness of machined hole is improved when the helix angle is 37$^{\circ}$, drill point angle is 118$^{\circ}$, and feed is 0.15mm/rev. The height of projected burr at the button of machined hole increases when the drill point angle and helix angle becomes large.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.8
• /
• pp.1747-1754
• /
• 1997

The helical array antenna is designed for domestic DBS(Directcast Satellite) reception. The antenna diameter is determined 30cm with 168 element s to cover from Moojoo (beam center) to Seoul. The helical antenna with 2-turns and 4.deg. pitch angle is chosen as array elements for good axial ratio and antenna height. In array antenna design, row distance is 0.787.lambda., array distance is 0.824.lambda. in the same row. The feed is constructed using the radial waveguide to decrease the height of antenna. The measured values of the designed antenna are not only satisfied with the design goals but also similar to theoritical values except the axial ratio.