• Nuclear Engineering and Technology
• /
• 제53권3호
• /
• pp.927-931
• /
• 2021

In this work, an attempt is made to improve the electrochemical corrosion resistance of Zircaloy-4 by helium ions implantation. For this purpose, the Zircaloy-4 was implanted with 300 keV helium ions of fluences 1 × 10¹³, 1 × 10¹⁵, and 1 × 10¹⁶ ions-cm^-2 by using Pelletron Accelerator. Electrochemical tests of pristine and ion-implanted samples were performed in NaCl solution and their potentiodynamic polarization curves were obtained. The results showed enhancement of the corrosion resistance of Zircaloy-4 after helium ions implantation. The corrosion rate and current density of the material were significantly reduced by the helium implantation. The decrease in corrosion parameters was attributed to helium ions diffusion inside Zircaloy-4 that reduced the electrons flow from the samples.

• Nuclear Engineering and Technology
• /
• 제52권4호
• /
• pp.827-834
• /
• 2020

Damage of tungsten due to helium ions of a PF device was studied. The tungsten was analyzed by SEM and AFM after irradiation. SEM revealed fine bubbles of helium atoms with diameters of a few nanometers, which join and form larger bubbles and blisters on the surface of tungsten. This observation confirmed the results of molecular dynamics simulation. SEM analysis after etching of the irradiated surface indicated cavities with depth range of 35-85 nm. The average fluence of helium ion of the PF device was calculated about 5.2 × 10¹⁵ cm^-2 per shot, using Lee code. Energy spectrum of helium ions was estimated using a Thomson parabola spectrometer as a function of dN/dE ∝ E^-2.8 in the energy range of 10-200 keV. The characteristics of helium ion beam was imported to SRIM code. SRIM revealed that the maximum DPA and maximum helium concentration occur in the depth range of 20-50 nm. SRIM also showed that at depth of 30 nm, all of the tungsten atoms are displaced after 20 shots, while at depth of higher than 85 nm the destruction is insignificant. There is a close match between SRIM results and the measured depths of cavities in SEM images of tungsten after etching.

• Progress in Superconductivity
• /
• 제11권1호
• /
• pp.8-12
• /
• 2009

We investigated the effects of the irradiation of light-ions on the superconducting $MgB_2$ thin films fabricated by using HPCVD. Deuterium and helium ions were irradiated on $MgB_2$ thin films by various doses, from $1{\times}10^{10}cm^{-2}\;to\;8{\times}10^{15}cm^{-2}$. During these experiments some reasonable results and unpredictable results have been obtained. The reasonable results are that the peak of the reduced maximum pinning force shifts by increasing the pinning sites in $MgB_2$ films and the slightly change of critical current density of films. We obtained some unusual results, which are the increasing of the transition temperature and the change of residual resistance ratio. Among the data of deuterium and helium ion irradiation experiments, the results of helium ion irradiation have most notable points so we will discuss mainly about helium irradiation experiments.

• Nuclear Engineering and Technology
• /
• 제52권7호
• /
• pp.1545-1556
• /
• 2020

Recently, the International Commission on Radiological Protection (ICRP) has developed the Mesh-type Reference Computational Phantoms (MRCPs) for adult male and female to overcome the limitations of the current Voxel-type Reference Computational Phantoms (VRCPs) described in ICRP Publication 110 due to the limited voxel resolutions and the nature of voxel geometry. In our previous study, the MRCPs were used to calculate the dose coefficients (DCs) for idealized external exposures of photons and electrons. The present study is an extension of the previous study to include three additional particles (i.e., neutrons, protons, and helium ions) into the DC library by conducting Monte Carlo radiation transport simulations with the Geant4 code. The calculated MRCP DCs were compared with the reference DCs of ICRP Publication 116 which are based on the VRCPs, to appreciate the impact of the new reference phantoms on the DC values. We found that the MRCP DCs of organ/tissue doses and effective doses were generally similar to the ICRP-116 DCs for neutrons, whereas there were significant DC differences up to several orders of magnitude for protons and helium ions due mainly to the improved representation of the detailed anatomical structures in the MRCPs over the VRCPs.

• 대한화학회지
• /
• 제35권6호
• /
• pp.699-706
• /
• 1991

헬륨 기체를 사용하여 중급 출력(500W) 마이크로파 유도 플라즈마(Microwave Induced Plasma:MIP)를 헬륨 기체를 사용하여 만든 뒤 직접 수용액 시료 분석에 사용하였다. Beenakker의 cavity를 변형시켜 얻은 안정된 헬륨 플라즈마는 실린더 형태의 모양을 하고 있고 기체의 흐름량을 조절하여 "toroidal"형태의 플라즈마도 얻을 수 있으나 분석학적 능력은 오히려 감소되었다. Glass Frit Nebuliser를 이용하여 분석하였을 때 금속 원소는 10~100 ppb 근처의 검출한계를 보였고 비금속원소인 염소의 경우는 50ppm근처의 검출한계를 보였다.

• Bulletin of the Korean Chemical Society
• /
• 제18권12호
• /
• pp.1285-1288
• /
• 1997

The graphite tube nozzle has been developed for the generation of metastable He jet by which the nitrogen molecules initially excited in a jet with Engelking type nozzle have been further excited in a corona excited supersonic expansion. The excitation process of nitrogen molecules in the jet collision has been discussed in detail by observing the emission intensity from the vibronic emission spectra of nitrogen molecules and nitrogen molecular ions upon helium jet collision.

• 한국환경보건학회지
• /
• 제16권2호
• /
• pp.31-39
• /
• 1990

An analytical method for particulate carbon and other elements by using elemental analyzer was investigated. Carbon, hydrogen, and nitrogen was determined as CO$_{2}$, H$_{2}$, and N$_{2}$, respectively. Organic was determined after scparation from elemental carbon(Cae) by volatilization and thermal decomposition in a heated helium flow. With organic materials examined in this reprot, more than 90% of carbon was detected as above 600$^{\circ}$C. But it is considered that a few percents of some compounds were charred above 550$^{\circ}$C. A small amount of Cae was oxidized in the inert atmosphere above 850$^{\circ}$C, but the reason was not explained clearly. Based on the thermal chracteristics of Cao it was found that the optimum temperature of heating in the helium flow of an elemental analyzer for Cao analysis is 630$^{\circ}$C. Carbon in a sample after removing Cao was assumed as Cae and the gramatom ratio of hydrogen to carbon in the sample was 0.4 and less. Rescovery of nitrogen derived from some ammonium salts and nitrates was 100% by two-step measurement with elemental analyzer. By the analytical method investigated in this report, carbon and other elements in suspended particulates(S.P) collected at an urban area in Seoul were measured. There was a good correlation between total nitrogen in SP measured by elemental analyzer and nitrogen estimated form ammonium ions and nitrate ions in SP. The nitrogen from these ions accounts for 80% of the total nitrogen. It is further suggested that the residue(20%) of the total nitrogen is attributed to the other nitrogeneous compounds.

• Nuclear Engineering and Technology
• /
• 제49권7호
• /
• pp.1495-1504
• /
• 2017

In a previous study, a set of polygon-mesh (PM)-based skin models including a $50-{\mu}m-thick$ radiosensitive target layer were constructed and used to calculate skin dose coefficients (DCs) for idealized external beams of electrons. The results showed that the calculated skin DCs were significantly different from the International Commission on Radiological Protection (ICRP) Publication 116 skin DCs calculated using voxel-type ICRP reference phantoms that do not include the thin target layer. The difference was as large as 7,700 times for electron energies less than 1 MeV, which raises a significant issue that should be addressed subsequently. In the present study, therefore, as an extension of the initial, previous study, skin DCs for three other particles (photons, protons, and helium ions) were calculated by using the PM-based skin models and the calculated values were compared with the ICRP-116 skin DCs. The analysis of our results showed that for the photon exposures, the calculated values were generally in good agreement with the ICRP-116 values. For the charged particles, by contrast, there was a significant difference between the PM-model-calculated skin DCs and the ICRP-116 values. Specifically, the ICRP-116 skin DCs were smaller than those calculated by the PM models-which is to say that they were under-estimated-by up to ~16 times for both protons and helium ions. These differences in skin dose also significantly affected the calculation of the effective dose (E) values, which is reasonable, considering that the skin dose is the major factor determining effective dose calculation for charged particles. The results of the current study generally show that the ICRP-116 DCs for skin dose and effective dose are not reliable for charged particles.

• Nuclear Engineering and Technology
• /
• 제54권6호
• /
• pp.1947-1953
• /
• 2022

As the plasma facing material in the nuclear fusion reactor, tungsten has to bear the irradiation impact of high energy particles. The surface quality of tungsten may affect its irradiation resistance, and even affect the service life of fusion reactor. In this paper, tungsten samples with different surface quality were polished by mechanical processing, subsequently conducted by D₂⁺ implantation and thermal desorption. D₂⁺ implantation was performed at room temperature (RT) with the irradiation dose of 1 × 10²¹ D₂⁺/m² by 5 keV D₂⁺ ions, and thermal desorption spectroscopy measurements were done from RT to 900 K. In addition, He irradiation was also performed by 50 eV He⁺ ions energy with the fluxes of 5.5 × 10²¹ m^-2s^-1 and 1.5 × 10²² m^-2s^-1, respectively. Results reveal that the hydrogen/helium irradiation behavior are both related to surface quality. Samples with high surface quality has superior D₂⁺ retention behavior with less D₂ retained after implantation. However, such samples are more likely to generate fuzzes on the surface after helium irradiation. Different morphologies (smooth, wavy, pyramids) after helium irradiation also demonstrates that the surface morphology is related to tungsten crystallographic orientation.

• Interaction and multiscale mechanics
• /
• 제4권3호
• /
• pp.207-217
• /
• 2011

International efforts have focused recently on the development of tungsten surfaces that can intercept energetic ionized and neutral atoms, and heat fluxes in the divertor region of magnetic fusion confinement devices. The combination of transient heating and local swelling due to implanted helium and hydrogen atoms has been experimentally shown to lead to severe surface and sub-surface damage. We present here a computational model to determine the relationship between the thermo-mechanical loading conditions, and the onset of damage and failure of tungsten surfaces. The model is based on thermo-elasticity, coupled with a grain boundary damage mode that includes contact cohesive elements for grain boundary sliding and fracture. This mechanics model is also coupled with a transient heat conduction model for temperature distributions following rapid thermal pulses. Results of the computational model are compared to experiments on tungsten bombarded with energetic helium and deuterium particle fluxes.