• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.292-298
• /
• 1991

본 연구에서는 입자질량고적재(high particle mass loading)의 경우가 전혀 고려되지 않았으며, 이것은 물론 임팩터가 사용되는 대부분의 경우, 즉, 대기중입자를 포집하는 경우에 입자의 적재량이 미소하기 때문이다. 그러나 임팩터 혹은 이와 유 사한 기능을 하는 장치의 응용은 매우 광범위하여 이중에는, OWG(optical wave guide) 제작이나 페인트 스프레이(paint spray) 또 입자공급장치에서 큰 입자를 걸러 낼 때와 같이, 입자의 적재량이 큰 경우도 적지 않다. 이러한 입자질량 고적재인 경우에는 입자운동이 기체유동장을 변화시키며 이에 따라 입자운동 자체도 변화되어진다. 본 연구에서는 이러한 관계를 분석하여 입자질량의 적재량정도가 입자의 포집효율에 미치 는 영향을 밝혀내었다.

• Structural Engineering and Mechanics
• /
• 제56권6호
• /
• pp.917-938
• /
• 2015

The nonlinear numerical analysis of the impact response of reinforced concrete/mortar beam incorporated with the updated Lagrangian method, namely the Smoothed Particle Hydrodynamics (SPH) is carried out in this study. The analysis includes the simulation of the effects of high mass low velocity impact load falling on beam structures. Three material models to describe the localized failure of structural elements are: (1) linear pressure-sensitive yield criteria (Drucker-Prager type) in the pre-peak regime for the concrete/mortar meanwhile, the shear strain energy criterion (Von Mises) is applied for the steel reinforcement (2) nonlinear hardening law by means of modified linear Drucker-Prager envelope by employing the plane cap surface to simulate the irreversible plastic behavior of concrete/mortar (3) implementation of linear and nonlinear softening in tension and compression regions, respectively, to express the complex behavior of concrete material during short time loading condition. Validation upon existing experimental test results is conducted, from which the impact behavior of concrete beams are best described using the SPH model adopting an average velocity and erosion algorithm, where instability in terms of numerical fragmentation is reduced considerably.

• Nuclear Engineering and Technology
• /
• 제54권10호
• /
• pp.3855-3863
• /
• 2022

An evaluation of the radiation shielding performance of high-Z-particle-loaded polylactic acid (PLA) composite materials was pursued. Specimens were produced via fused deposition modeling (FDM) using copper-PLA, steel-PLA, and BaSO₄-PLA composite filaments containing 82.7, 75.2, and 44.6 wt% particulate phase contents, respectively, and were tested under broad-band flash x-ray conditions at the Sandia National Laboratories HERMES III facility. The experimental results for the mass attenuation coefficients of the composites were found to be in good agreement with GEANT4 simulations carried out using the same exposure conditions and an atomistic mixture as a model for the composite materials. Further simulation studies, focusing on the Cu-PLA composite system, were used to explore a shield design parameter space (in this case, defined by Cu-particle loading and shield areal density) to assess performance under both high-energy photon and electron fluxes over an incident energy range of 0.5-15 MeV. Based on these results, a method is proposed that can assist in the visualization and isolation of shield parameter coordinate sets that optimize performance under targeted radiation characteristics (type, energy). For electron flux shielding, an empirical relationship was found between areal density (AD), electron energy (E), composition and performance. In cases where ${\frac{E}{AD}}{\geq}2MeV{\bullet}cm{\bullet}g^{-1}$, a shield composed of >85 wt% Cu results in optimal performance. In contrast, a shield composed of <10 wt% Cu is anticipated to perform best against electron irradiation when ${\frac{E}{AD}}<2MeV{\bullet}cm{\bullet}g^{-1}$.

• 한국대기환경학회지
• /
• 제17권1호
• /
• pp.85-96
• /
• 2001

The objective of this study is to develop the water spraying which can effectively by applied to the control or suppression of the fugitive dust generated from the scrap metal handling area at the Port of Inchon. As a first step toward this goal, we carried out some preliminary analyses on the chemical composition, physical shape, and particle size distribution of the sample dust. Next, to quantitatively investigate the effect of adding surfactants to the spraying water on the wettability of the sample dust, the Standard Sink Test was carried out for four different surfactants and at six different concentrations using the surfactants considered in this study. Results of from the preliminary analysis indicated that the main chemical component consisting of the sample dust is Goethite(FeO(OH)) and that the particles smaller than 10 ${\mu}{\textrm}{m}$ in geometric diameter occupy about 36% of the sample dust in mass. This result implies that the fugitive dust generated from the scrap metal handling area at the Port of Inchon should affect the environment nearby more than we have expected. This is because of relatively large mass percentage of the small metal particles less than 10${\mu}{\textrm}{m}$ in geometric diameter, what we may call respirable particles. As for the results of the Standard Sink Test, higher surfactant concentration tends to result in the higher wettability of the sample dust for the surfactants considered in this study, which in turn ensures the high particle collection efficiency of the droplets generated from the water spraying system. Based upon this preliminary results, studies to develop more sophisticated scaled model for dynamic test in underway and the effort to find the best surfactants as well as the optimum operating conditions are being made at the same time.

• 한국지구과학회지
• /
• 제31권6호
• /
• pp.600-607
• /
• 2010

2008년 동아시아 대륙에서 발생기원이 다른 먼지(황사)와 인위적 오염입자의 광역적 이동 사례를 NOAA위성 RGB 합성영상과 지상 입경별 분진(TSP, $PM_{10}$, $PM_{2.5}$)의 질량농도 관측으로 분석하였다. 또한 Terra/Aqua 위성 MODIS(Moderate resolution Imaging Spectroradiometer) 센서의 AOD(Aerosol Optical Depth)와 FW(Fine aerosol Weighting)를 통해 동아시아 지역에서 발생기원이 다른 대기 에어로졸의 분포와 입자 크기 특성을 분석하였다. 중국 북부와 몽골, 그리고 중국 황토고원에서 모래폭풍이 발생하여 광역적으로 이동하여 청원에 먼지입자(황사)로 영향을 주는 6 개의 사례분석을 실시하였다. 질량농도 TSP중 $PM_{10}$은 70%, $PM_{2.5}$는 16%로 조대입자(> $2.5\;{\mu}m$)의 비율이 큰 것은 사막과 반사막의 자연적 발생원에서 생성되었기 때문이다. 그러나, 모래 폭풍이 이동 과정에서 중국 동부의 산업 지역을 거쳐 유입하는 사례에서는 TSP 중 $PM_{2.5}$가 23%까지 증가하기도 했다. 중국 동부로부터 황해를 거쳐 한반도로 유입한 5개 다른 사례의 경우, TSP 중 $PM_{10}$, $PM_{2.5}$가 각각 82, 65%로 나타났다. 이와 같이 $PM_{2.5}$의 상대적 비율이 증가한 것은 인위적 오염입자의 영향 때문이다. 동아시아 지역에서 인위적 오염입자의 광역적 이동 사례에 대한 평균 AOD는 $0.42{\pm}0.17$로 황사에 의한 AOD($0.36{\pm}0.13$)와 비교하여 대기 에어로졸에 대한 비율이 높게 나타났다. 특히, 중국 동부에서 황해, 한반도, 동해에 이르는 광역적 지역에 AOD값이 높게 분포했다. 인위적 오염입자의 사례는 FW가 평균 $0.63{\pm}0.16$로 모래폭풍의 이동 사례의 $0.52{\pm}0.13$ 보다 높은 값을 보였다. 이는 대기 에어로졸에 대한 인위적 미세 오염 입자의 기여도가 클 수 있음을 제시하고 있다.

• 전기화학회지
• /
• 제25권1호
• /
• pp.32-41
• /
• 2022

Various steps in the electrode production process, such as slurry mixing, slurry coating, drying, and calendaring, directly affect the quality and, consequently, mechanical properties and electrochemical performance of electrodes. Herein, a new method of slurry coating is developed: Double-coated electrode. Contrary to single-coated electrode, the cathode is prepared by double coating, wherein each coat is of half the total loading mass of the single-coated electrode. Each coat is dried and calendared. It is found that the double-coated electrode possesses more uniform pore distribution and higher electrode density and allows lesser extent of particle segregation than the single-coated electrode. Consequently, the double-coated electrode exhibits higher adhesion strength (74.7 N m^-1) than the single-coated electrode (57.8 N m^-1). Moreover, the double-coated electrode exhibits lower electric resistance (0.152 Ω cm^-2) than the single-coated electrode (0.177 Ω cm^-2). Compared to the single-coated electrode, the double-coated electrode displays higher electrochemical performance by exhibiting better rate capability, especially at higher C rates, and higher long-term cycling performance. Despite its simplicity, the proposed method allows effective electrode preparation by facilitating high electrochemical performance and is applicable for the large-scale production of high-energy-density electrodes.