• Applied Science and Convergence Technology
• /
• v.24 no.6
• /
• pp.250-253
• /
• 2015

High contrast grating (HCG) is the structure made up of the sub-wavelength grating of high-index and the surrounding layer of low-index, which reveals high contrast between two materials. Its advantages include high reflectivity over a broad bandwidth, polarization and wavelength selectivity, optical high-Q resonator, and phase modulation. In this work, the HCG structure comprising of indium tin oxide (ITO) and Silicon (Si), for the surrounding layer and the grating layer respectively, was studied. Its theoretical model was established, and transmittance, phase and optical behavior were calculated by rigorous coupled-wave analysis and finite element method. Furthermore, the established structure was fabricated to validate its feasibility. The fabricated structure shows the focusing capability whose length is about $10{\mu}m$, and the feasibility of the structure was demonstrated. It is also meaningful that ITO layer can contribute to the fabrication of the HCG structure, leading to enable the structure to be electrical-driven.

• Journal of the Korean Physical Society
• /
• v.73 no.12
• /
• pp.1827-1833
• /
• 2018

X-ray grating interferometry has been an active area of research in recent years. In particular, various studies have been carried out for the practical use of the x-ray grating interferometer in medical and industrial fields. For the commercialization of the system, it needs to be optimized for its application. In this study, we have developed a prototype of the compact high energy x-ray grating interferometer of which the high effective energy and compactness is of our primary feature of design. We have designed the Talbot-Lau x-ray interferometer in a symmetrical geometry with an effective energy of 54.3 keV. The system has a source-to-analyzer grating distance of 788.4 mm, which is compact enough for a commercial product. In a normal operation, it took less than ten seconds to acquire a set of phase stepping images. The acquired images had a maximum visibility of about 15%, which is relatively high compared with the visibilities of the other high-energy grating interferometric systems reported so far.

• Current Optics and Photonics
• /
• v.1 no.4
• /
• pp.295-307
• /
• 2017

An innovative system for the alternative continuous wide spectral spatial heterodyne spectrometer (ACWS-SHS) is proposed. The relationship between the ACWS-SHS and the wide spectral spatial heterodyne spectrometer (WS-SHS) at the resolution limit, the spectral range, the grating diffraction efficiency and the interference fringes contrast ratio has been analyzed theoretically. Through the comparison of the theoretical analysis and simulation results, it is found that the two systems for the WS-SHS and the ACWS-SHS have the same resolution limit and spectral range, which are ${\delta}{\sigma}$ and ${\sigma}_{01}$, while in the ACWS-SHS system the critical diffraction efficiency of echelle grating is 68.39% and the critical contrast ratio of interference fringes is 0.4135, which is much better than the performance of the WS-SHS system. Therefore, the ACWS-SHS reduces the high requirements for the precision of equipment and expands the application field of SHS effectively.

• Journal of radiological science and technology
• /
• v.42 no.1
• /
• pp.67-75
• /
• 2019

Grating interferometry based imaging technology is a kind of radiation imaging system, which can acquire not only absorption image but also phase difference and dark field image using the Talbot pattern. However, because of the technological difficulties and high cost of fabricating the gratings that make up the system, much efforts are being made to look for ways to replace them. The is a preliminary study to see how the Talbot pattern transfer through various kinds of scintillators and if the optical grating can be a way to replace the conventional absorption gratings. The geometry of the interferometer, the scintillator model, and the scintillator thickness are the main inputs for our simulation. We have used the concept of modulation for quantitative analysis of the contrast ratio of the Talbot pattern. This research is expected to provide very useful information on the design of optical gratings, which is an alternative way to analyze the Talbot pattern, which we have filed a patent on.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.426.2-426.2
• /
• 2014

Wavefront control은 렌즈, 거울 등을 포함한 많은 광학소자를 대체할 수 있는 기술이며, 이는 광 직접 소자 개발에 매우 유용하다. 기존의 Distributed bragg reflector (DBR) 구조의 경우 lattice mismatch, 낮은 효율, 작은 굴절률 차이의 물질만을 사용해야 하는 문제 등으로 광 직접 소자에의 적용에는 한계가 있다. 본 연구에서는 이러한 한계점을 극복하고, 더 나아가 광학소자 구조 내에서의 빛의 거동을 조절하기 위해서 High-index contrast grating (HCG), 즉, 큰 굴절률 차이가 나는 물질로 이루어진 격자 구조 내의 빛이 가지는 waveguide 특성에 대한 연구가 수행되었다. 굴절률 차이가 큰 물질을 sub-wavelength의 주기적인 혹은 비주기적인 격자 구조로 만듦으로써 투과된 빛의 투과도와 위상 등을 조절할 수 있고 이를 통해 빛의 초점 거리, 휘어짐을 조절 할 수 있다. HCG 구조 내의 빛의 거동을 Rigorous coupled wave analysis (RCWA) 및 Finite element method (FEM) 계산을 이용하여 시뮬레이션 하였다. RCWA 계산을 통해 주기 격자구조의 투과도 및 반사도, 빛의 위상을 계산하여 비주기를 갖는 전체적인 HCG 구조를 결정하였고, FEM 계산을 통하여 그 구조 내에서 빛의 거동을 시뮬레이션 하였다. 1,300 nm 파장의 빛이 광원으로 사용되었고 시뮬레이션을 위해 낮은 굴절률의 물질로 ITO, 높은 굴절률의 물질로는 Si이 사용되었다. $15{\mu}m$ 포커싱, $7.91^{\circ}$의 휘어짐을 시뮬레이션 하였고, 실제 소자 공정을 하여 제작한 후, 광 측정 결과 포커싱은 $15{\mu}m$, 휘어짐은 $4.5{\sim}6.5^{\circ}$를 확인하였다. 이러한 결과를 바탕으로 HCG구조체를 통하여 빛의 엔지니어링이 가능함을 알 수 있었다. HCG구조체는 빛이 투과하는 광학 소자의 전반에 적용이 가능하며 더 나아가 인위적인 빛의 엔지니어링이 가능함을 시사한다.

• Journal of the Optical Society of Korea
• /
• v.13 no.1
• /
• pp.53-59
• /
• 2009

A chirped-pulse amplification Ti:sapphire laser system has been designed using a 10-Hz 100-TW Ti:sapphire laser to generate 0.1-Hz 0.5-PW laser pulses and optimize their temporal qualities such as temporal contrast and pulse duration. A high-energy booster amplifier to be added is expected to produce an energy above 30 J through the parasitic lasing suppression and the efficient amplification. To improve the temporal contrast of the laser pulses, a high-contrast 1-kHz amplifier system is used as a front-end. A grating stretcher which makes the laser pulse have 1-ns duration is used to prevent optical damages due to high pulse energy during amplification. A grating compressor has been designed with group delay analysis to obtain the recompressed pulse duration close to the transform-limited pulse duration. The final laser pulses are expected to have energy above 20 J and duration below 40 fs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.614-615
• /
• 2009

For the high reflectance under the ambient light condition, a highly efficient diffractive reflector has been proposed, based on a micro grating structure.[1] This reflector was designed to show highly concentrated distribution of the reflected light to the normal direction of the reflector under specific incident conditions of the light. In order to apply a diffractive reflector to a reflective liquid crystal display, the coupling between the viewing angle characteristics of a liquid crystal (LC) cell and the reflective distribution of the reflector should be considered. Under the optimum configuration confirmed through the analysis of the coupling between a LC cell and a reflector, a reflective vertical alignment (VA) cell with a diffractive reflector shows contrast ratio and brightness much higher than that with a conventional bumpy reflector.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.421-421
• /
• 2006

The light and energy-efficiency of classical liquid crystal displays is notoriously poor due to the use of absorption-based linear polarisers and colour filters. For instance, the light efficiency of PVAL polarisers is typically between 40 and 45 % and the colour filters have a typical efficiency below 35 % which results in a total light and energy-efficiency of the display below 10 %. In the past, a variety of polarizers were developed with an enhanced efficiency in generating linearly polarized light. Typically, these polarizers are based on the polarisationselective reflection, scattering or refraction of light i.e. one polarisation direction of light is directly transmitted to the LCD/viewer and the other polarization direction of light is depolarised and recycled which results in a typical efficiency for generating linearly polarized light of 70-85 %. Also, special colour filters have been proposed based on chiral-nematic reactive mesogens which increase the efficiency of generating colour. Despite the enormous progress in this field, a need persists for improved methods for generating polarized light and colour based on low cost optical components with a high efficiency. Here, the use of holographic phase gratings is reported for the generation of polarized light and colour. The phase grating are recorded in a photopolymer which is coated onto a backor frontlight for LCDs. Typically the recording is performed in the transmisson mode or in the waveguiding mode and slanted phase gratings are generated with their refractive index modulation at an angle between 20o and 45o with the normal of the substrate. It is shown that phase gratings with a high refractive index modulation and a high efficiency can be generated by a proper selection of the photopolymer and illumination conditions. These phase gratings coupleout linearly polarized light with a high contrast (> 100) and the light is directed directly to the LCD/viewer without the need for redirection foils. Dependent on the type of phase grating, the different colours are coupled-out at a slightly different angle which potentially increases the efficiency of classical colour filters. Moreover, the phase gratings are completely transparent in direct view which opens the possibility to use them in frontlights for LCDs. Holographic polarization gratings posses a periodic pattern in the polarization state of light (and not in the intensity of light). A periodic pattern in the polarization direction of linearly polarized light is obtained upon interference of two circularly polarized laser beams. In the second part of the lecture, it is shown that these periodic polarization patterns can be recorded in a linear photo-polymerizable polymer (LPP) and that such an alignment layer induces a period rotation in the director of (reactive and non-reactive) liquid crystals. By a proper design, optical components can be produced with only first order diffraction and with a very high efficiency (>0.98). It is shown that these diffraction gratings are potentially useful in projection displays with a high brightness and energy efficiency

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.4
• /
• pp.133-140
• /
• 2006

The growth characteristics and properties of large size $SrAlF_5$ single crystals are described and compared with those of $BaMgF_4$. Transmission spectra in the vacuum ultraviolet wavelength region indicate a high transparency of $SrAlF_5$ (about 90% without considering surface reflection loses) down to 150 nm, on contrast to the optical loses observed for $BaMgF_4$. The ferroelectric character of $SrAlF_5$ is evidenced by the reversal of the spontaneous polarization in a hysteresis loop. The higher potential of $SrAlF_5$ in comparison with $BaMgF_4$ for the realization of all-solid-state lasers in the ultraviolet wavelength region by the quasi-phase matching (QPM) technique is pointed out. $SrAlF_5$, besides a higher grade of transparency, shows a nonlinear effective coefficient similar to that of quartz and uniaxial nature, on contrast to the one order smaller nonlinear coefficient and biaxial character of $BaMgF_4$. The refractive index of $SrAlF_5$ from the ultraviolet to the near-infrared wavelength region is measured by the minimum deviation method. The Sellmeier and Cauchy coefficients are obtained from the fits to the curves of the ordinary and extraordinary refractive indices, and the grating period for the first order QPM is estimated as a function of the wavelength. The poling periodicity for 193 nm SHG from 386 nm is $4{\mu}m$.