• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.280-281
• /
• 2009

Improving the visual contrast in OLED displays is another important issue to address with a significant technological implication. The use of a gradient refractive index anode shows promise for contrast improvements in OLEDs. This talk will discuss the progress in developing gradient refractive index TCO anode for application in high contrast OLEDs.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.8
• /
• pp.2494-2498
• /
• 2012

Preparation of several new spirocyclic mercapto derivatives is described. Thiol protection on multi-carbonyl compounds allows of high sulfur content necessary to induce high refractive index. Condensation of 1,3-dimercapto-2-propanol and cyclohexanone followed by successive oxidation and thioacetalization affords a dispirocycle with four sulfurs. Selective S,S-protection of cyclohexane-1,4-dione is achieved with 1,3-dimercapto-2-propanol and 2,3-dimercapto-1-propanol to provide dispirocycles with four sulfurs. Olefine-oxidation of norbornene gives a useful dialdehyde intermediate which is transformed to 1,3-dithiolane for a linearly-bound-cyclic molecule. Refractive index of linearly-bound-cycles was below 1.60 and dispirocycles exhibited high refractive index of 1.57-1.69.

• Korean Journal of Materials Research
• /
• v.20 no.7
• /
• pp.370-373
• /
• 2010

In fabricating plasma display panels, the photolithographic process is used to form patterns of barrier ribs with high accuracy and high aspect ratio. It is important in the photolithographic process to control the refractive index of the photosensitive paste. The composition of this paste for photolithography is based on the $B_2O_3-SiO_2-Al_2O_3$ glass system, including additives of alkali oxides and rare earth oxides. In this work, we investigated the density, structure and refractive index of glasses based on the $B_2O_3-SiO_2-Al_2O_3$ system with the addition of $Li_2O$, $K_2O$, $Na_2O$, CaO, SrO, and MgO. The refractive index of the glasses containing K2O, Na2O and CaO was similar to that of the [BO3] fraction while that of the SrO, MgO and Li2O containing glasses were not correlated with the coordination fraction. The coordination number of the boron atoms was measured by MAS NMR. The refractive index increased with a decrease of molar volume due to the increase in the number of non-bridging oxygen atoms and the polarizability. The lowest refractive index (1.485) in this study was that of the $B_2O_3-SiO_2-Al_2O_3-K_2O$ glass system due to the larger ionic radius of $K^+$. Based on our results, it has been determined that the refractive index of the $B_2O_3-SiO_2-Al_2O_3$ system should be controlled by the addition of alkali oxides and alkali earth oxides for proper formation of the photosensitive paste.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.120-123
• /
• 2002

In this study it had an excellent optical characteristic, it followed in the creation rate and the refractive index regulation to the ease. Chalcogenide produced the $As_{45}Se_{45}Te_{10}$ thin film and the $MgF_{2}$ thin film. It measured thin film plan simulation, and the thin film has a 1 -dimensional photonic band gap. The chalcogenide $As_{45}Se_{45}Te_{10}$ thin film was measured with the fact that it has a high refractive index (2.6~2.9). The $As_{45}Se_{45}Te_{10}$ and $MgF_{2}$ thin film, have a high refractive index and a low refractive index, it used a simulation and planed period 5-pairs structure, the result was from 500nm to 800nm. It will be able to confirm the characteristic which most of the incidence light reflects, the He-Ne (632.8nm) laser was irradiated in the thin film which stabilized the thin film. $As_{45}Se_{45}Te_{10}$ (high refractive index layer: H) and $MgF_{2}$ (low refractive index layer: L) results which plans the thin film with glass/LHLHLLHLHL/air structure, 632.8nm against transmitance, increased a lot. An application possibility with the filter against a specific wave length was confirmed.

• Current Optics and Photonics
• /
• v.3 no.5
• /
• pp.415-422
• /
• 2019

Retroreflection of vehicle headlights, as induced by spherical glass beads, is a key optical phenomenon that provides road-surface markings with greatly enhanced visibility, thus better securing a driver's safety in the nighttime as well as in unclear daytime. Retroreflectance of glass beads is a quite sensitive function of their refractive index, so that measurement of the refractive index of glass specifically in the shape of spherical beads needs to be performed within a reasonable uncertainty that is tolerable for road-marking applications. The Becke line method has been applied in assessing refractive index of such glass beads as e.g. an industrial standard in the Republic of Korea; however, the reference refractive-index liquids are not commercially available these days for refractive index greater than 1.80 due to the toxicity of the constituent materials. As such, high-refractive-index glass beads require an alternate method, and in this regard we propose a practically serviceable technique with uncertainty tantamount to that of the Becke line method: Based on comparison of calculated and measured retroreflectance values of commercial glass beads, we discover that their refractive index can be determined with reasonable precision via the retroreflectance measurement. Specifically, in this study the normalized retroreflectance originating from a single glass sphere is computed as a function of refractive index using the Fresnel equations, which is then validated as coinciding well with retroreflectance values measured from actual specimens, i.e. glass-bead aggregates. The uncertainties involved are delineated in connection with radius and imperfections of the glass beads.

• Korean Journal of Optics and Photonics
• /
• v.15 no.6
• /
• pp.563-568
• /
• 2004

The high temperature proton exchange (HTPE) method was used to fabricate optical waveguides based on LiNbO$_3$, which gives rise to low propagation loss and high polarization extinction ratio. To characterize the refractive index distribution of the fabricated waveguides, the guided modes of each waveguide were observed using the prism coupling method and then the refractive index profile was calculated by the inverse WKB method with the least square fitting. Finally, we showed how the HTPE parameters such as the temperature of PE, the concentration of lithium additive, and the time of PE effect the refractive index profile.

• Macromolecular Research
• /
• v.15 no.6
• /
• pp.533-540
• /
• 2007

We designed and successfully synthesized UV curable, functional acrylate monomers having a polarizing group, i.e., an electron-withdrawing and/or electron-donating group for the optical materials of high refractive index. Optical polymer films made from the functional methacrylate monomers were achieved with photo crosslinking under UV illumination. A monomer having amino and cyano groups (Dimer-CN) exhibited the highest refractive index ($n_{TE}$=1.595 at 850nm) among the studied methacrylate derivatives, due to the large polarizability of the dipolar monomer structures with electron-donating and withdrawing groups. By controlling the compositions of the functional acrylate monomer of copolymers, the refractive indices of the polymers were readily adjusted within a wide range of 1.498-1.595. The copolymers showed a high glass transition temperature $(T_g)$ and good thermal stability, which are desirable for optical applications. $T_g$ and $T_{10%}$ (10%-weight loss occurred) of the copolymers ranged from $120-140^{\circ}C$ and from $329-387^{\circ}C$, respectively.

• Polymer(Korea)
• /
• v.34 no.6
• /
• pp.588-593
• /
• 2010

New seven acrylic monomers with covalently bonded silicon, germanium, and tin were prepared for high refractive index materials. The monomers were copolymerized with a cross-linkable comonomer (Trimer) to prepare UV-films for optical characterization. The refractive index of the copolymers increased in proportion to the monomer content and extrapolated to determine that of homopolymer. $Ph_3Si$, $Ph_3Ge$, and $Ph_3Sn$ groups contributed to increase the refractive index of acrylic polymer, in which $Ph_3Sn$ was more effective than $Ph_3Ge$. The index increment confidently occurred with $Bu_3Sn$ attachment in comparison with aliphatic acrylic polymers. $Ph_3SnS$-attached acrylate polymer showed a refractive index of 1.671 at 589 nm. The index change was similarly observed at various different wavelengths (656, 830, 1310, and 1550 nm).

• Current Optics and Photonics
• /
• v.4 no.1
• /
• pp.44-49
• /
• 2020

In this paper, a new method is presented to measure the refractive index of single plain glass or multilayered materials, based on a laser frequency-shifted confocal feedback microscope. Combining the laser frequency-shifted feedback technique and the confocal effect, the method can attain high axial-positioning accuracy, stability and sensitivity. Measurements of different samples are given, including N-BK7 glass, Silica plain glass, and a microfluidic chip with four layers. The results for N-BK7 glass and Silica plain glass show that the measurement uncertainty in the refractive index is better than 0.001. Meanwhile, the feasibility of this method for multilayered materials is tested. Compared to conventional methods, this system is more compact and has less difficulty in sample processing, and thus is promising for applications in the area of refractive-index measurement.

• Textile Coloration and Finishing
• /
• v.16 no.2
• /
• pp.47-51
• /
• 2004

A differential refractive index detector was used for monitoring glucose contents in textile processing solutions. The sensitivity of the device was high enough to measure 0.05％ aqueous glucose solution that could not be measured by normal refractive index measurement. The device was set to monitor glucose concentration continuously in real time by measuring differential refractive index and calibrated by standard glucose solutions in a range of 0.1 to 1.0%. The possibility of industrial application of the device was demonstrated by real-time monitoring of glucose concentration in textile processing solutions such as desizing bath and cellulase treatment bath. Both of solutions contained glucose as a major degraded product. The device would be able to control the weight loss of cellulosic fiber during cellulase treatment since the amount of degraded products in a processing bath is proportional to its weight loss.