• 전기학회논문지
• /
• 제60권12호
• /
• pp.2281-2285
• /
• 2011

An algorithm for extracting SPICE MOS level 2 model parameters for the high voltage MOSFET DC model is proposed. The optimization method for analyzing the nonlinear data of the current-voltage curve using the Gauss-Newton algorithm is proposed and the pre-process step for calculating the threshold voltage and the mobility is proposed. The drain current obtained from the proposed method shows the maximum relative error of 5.6% compared with the drain current of 2-dimensional device simulation for the high voltage MOSFET.

• 한국정보통신학회논문지
• /
• 제14권6호
• /
• pp.1460-1464
• /
• 2010

본 논문에서는 MicroTec을 이용하여 Trench D-MOSFET의 항복전압을 분석하였다. 소자의 고집적을 위한 특성 분석 기술은 빠른 변화를 보이고 있다. 이에 따라 고집적 소자의 특성을 시뮬레이션을 통하여 이해하고 이에 맞게 제작하는 기술은 매우 중요한 과제 중의 하나가 되었다. Trench MOSFET은 고전압에서 가장 선호하는 전원장치이다. Trench MOSFET에서 산화막 두께와 도핑농도는 항복전압의 크기를 결정하며 고전압에 커다란 영향을 미치고 있다. 본 연구에서는 채널의 도핑 농도를 $10^{15}cm^{-3}$에서 $10^{17}cm^{-3}$까지 변화시켜 도핑 농도에 따른 항복전압 특성을 조사하였다. 또한 게이트 산화막 두께와 접합깊이를 변화시켜 항복전압 특성을 분석하였다.

• 한국전기전자재료학회논문지
• /
• 제30권2호
• /
• pp.63-66
• /
• 2017

This research was about shielded trench gate power MOSFET for low voltage and high speed. We used T-CAD tool and carried out process and device simulation for exracting design and process parameters. The exracted parameters was used to design shieled and conventional trench gate power MOSFET. And The electrical characteristics of shieled and conventional trench gate power MOSFET were compared and analyzed for their power device applications. As a result of analyzing electrical characteristics, the recorded breakdown voltages of both devices were around 120 V. The electric distributions of shielded and conventional trench gate power MOSFET was different. But due to the low voltage level, the breakdown voltage was almost same. And the other hand, the threshold voltage characteristics of shielded trench gate power MOSFET was superior to convention trench gate power MOSFET. In terms of on resistance characteristics, we obtained optimal oxied thickness of $3{\mu}m$.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
• /
• pp.309-312
• /
• 2003

In this study, the electrical characteristic of Symmetric high voltage MOSFET (SHVMOSFET) for display driver IC were investigated. Measurement data are taken over range of temperature (300K-400K) and various extended drain length. In high temperature condition(>400K), drain current decreased over 20％, and specific on-resistance increased over 30％ in comparison with room temperature.

• 한국정보전자통신기술학회논문지
• /
• 제16권4호
• /
• pp.180-186
• /
• 2023

본 논문은 4세대 VNAND 공정으로 만들어진 고전압 SiO2 절연층 nMOSFET의 n⁺ 및 p⁺ poly-Si 게이트에서의 positive bias temperature instability(PBTI) 열화에 대해 비교하고 각각의 메커니즘에 대해 분석한다. 게이트 전극 물질의 차이로 인한 절연층의 전계 차이 때문에 n⁺/nMOSFET의 열화가 p⁺/nMOSFET의 열화보다 더 클 것이라는 예상과 다르게 오히려 p⁺/nMOSFET의 열화가 더 크게 측정되었다. 원인을 분석하기 위해 각각의 경우에 대해 interface state와 oxide charge를 각각 추출하였고, 캐리어 분리 기법으로 전하의 주입과 포획 메커니즘을 분석하였다. 그 결과, p⁺ poly-Si 게이트에 의한 정공 주입 및 포획이 p⁺/nMOSFET의 열화를 가속시킴을 확인하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제18권4호
• /
• pp.195-198
• /
• 2017

This research analyzed the electrical characteristics of an 80 V optimal trench power MOSFET (metal oxide field effect transistor) for mobile applications. The power MOSFET is a fast switching device in fields with low voltage(<100 V) such as mobile application. Moreover, the power MOSFET is a major carrier device that is not minor carrier accumulation when the device is turned off. We performed process and device simulation using TCAD tools such as MEDICI and TSUPREM. The electrical characteristics of the proposed trench gate power MOSFET such as breakdown voltage and on resistance were compared with those of the conventional power MOSFET. Consequently, we obtained breakdown voltage of 100 V and low on resistance of $130m{\Omega}$. The proposed power MOSFET will be used as a switch in batteries of mobile phones and note books.

• ETRI Journal
• /
• 제28권2호
• /
• pp.253-256
• /
• 2006

We propose a novel power metal oxide semiconductor field effect transistor (MOSFET) employing a strained-Si channel structure to improve the current drivability and on-resistance characteristic of the high-voltage MOSFET. A 20 nm thick strained-Si low field channel NMOSFET with a $0.75\;{\mu}m$ thick $Si_{0.8}Ge_{0.2}$ buffer layer improved the drive current by 20% with a 25% reduction in on-resistance compared with a conventional Si channel high-voltage NMOSFET, while suppressing the breakdown voltage and subthreshold slope characteristic degradation by 6% and 8%, respectively. Also, the strained-Si high-voltage NMOSFET improved the transconductance by 28% and 52% at the linear and saturation regimes.

• 한국전기전자재료학회논문지
• /
• 제33권2호
• /
• pp.109-113
• /
• 2020

A power device is a component used as a switch or rectifier in power electronics to control high voltages. Consequently, power devices are used to improve the efficiency of electric-vehicle (EV) chargers, new energy generators, welders, and switched-mode power supplies (SMPS). Power device designs, which require high voltage, high efficiency, and high reliability, are typically based on MOSFET (metal-oxide-semiconductor field-effect transistor) and IGBT (insulated-gate bipolar transistor) structures. As a unipolar device, a MOSFET has the advantage of relatively fast switching and low tail current at turn-off compared to IGBT-based devices, which are built on bipolar structures. A superjunction structure adds a p-base region to allow a higher yield voltage due to lower R_DS (on) and field dispersion than previous p-base components, significantly reducing the total gate charge. To verify the basic characteristics of the superjunction, we worked with a planar type MOSFET and Synopsys' process simulation T-CAD tool. A basic structure of the superjunction MOSFET was produced and its changing electrical characteristics, tested under a number of environmental variables, were analyzed.

• Journal of Power Electronics
• /
• 제18권1호
• /
• pp.23-33
• /
• 2018

Silicon Carbide (SiC) MOSFET belongs to the family of wide-band gap devices with inherit property of low switching and conduction losses. The stable operation of SiC MOSFET at higher operating temperatures has invoked the interest of researchers in terms of its application to high power density (HPD) power converters. This paper presents a performance study of SiC MOSFET based two-phase interleaved boost converter (IBC) for regulation of avionics bus voltage in more electric aircraft (MEA). A 450W HPD, IBC has been developed for study, which delivers 28V output voltage when supplied by 24V battery. A gate driver design for SiC MOSFET is presented which ensures the operation of converter at 250kHz switching frequency, reduces the miller current and gate signal ringing. The peak current mode control (PCMC) has been employed for load voltage regulation. The efficiency of SiC MOSFET based IBC converter is compared against Si counterpart. Experimentally obtained efficiency results are presented to show that SiC MOSFET is the device of choice under a heavy load and high switching frequency operation.

• 한국전기전자재료학회논문지
• /
• 제26권10호
• /
• pp.713-719
• /
• 2013

Power MOSFET operate voltage-driven devices, design to control the large power switching device for power supply, converter, motor control, etc. We have optimal designed planar and trench gate power MOSFET for high breakdown voltage and low on resistance. When we have designed $6,580{\mu}m{\times}5,680{\mu}m$ of chip size and 20 A current, on resistance of trench gate power MOSFET was low than planar gate power MOSFET. The on state voltage of trench gate power MOSFET was improved from 4.35 V to 3.7 V. At the same time, we have designed unified field limit ring for trench gate power MOFET. It is Junction Termination Edge type. As a result, we have obtained chip shrink effect and low on resistance because conventional field limit ring was convert to unify.