• 한국안전학회지
• /
• 제18권2호
• /
• pp.34-39
• /
• 2003

In this paper, when CF/PEEK laminates for high efficiency space structure are subjected to FOD(Foreign Object Damage), the effects of temperature change on the impact damages(interlaminar separation and transverse crack) of CF/PEEK laminates and the relationship between residual lift and impact damages are experimentally investigated. Composite laminates used in this experiment are CF/PEEK orthotropic laminated plates, which have two-interlaces [$0^{\circ}_4/90^{\circ}_8/0^{\circ}_4$]. A steel ball launched by the air gun collides against CF/PEEK laminates to generate impact damages. And then CF/PEEK specimens with impact damages are observed by a scanning acoustic microscope under room and high temperatures. In this experimental results, various relations are experimentally observed including the delamination area vs. temperature change, the bending strength vs. impact energy and the residual bending strength vs. impact damage of CF/PEEK laminates.

• 한국안전학회지
• /
• 제20권1호
• /
• pp.75-80
• /
• 2005

In this paper, when CF/EPOXY laminates for high efficiency space structure are subjected to FOD(Foreign Object Damage), the effects of temperature change on the impact damages(inter laminar separation and transverse crack) of CF/EPOXY laminates and the relationship between residual life and impact damages ale experimentally investigated. Composite laminates used in this experiment are CF/EPOXY orthotropic laminated plates, which have two-interfaces $[0^{\circ}_6/90^{\circ}_6]S$ and four-interfaces $[0^{\circ}_3/90^{\circ}_6/0^{\circ}_3]S$. CF/EPOXY specimens with impact damages caused by a steel ball launched from the air gun were observed by the scanning acoustic microscope under room and high temperatures. In this experimental results, various relations were experimentally observed including the delamination area vs. temperature change, the bending strength vs. impact energy and the residual bending strength vs. impact damage of CF/EPOXY laminates. And as the temperature of CF/PEEK laminates increases, the delaminaion areas of impact-induced damages decrease linearly. A linear relationship between the impact energy and the delamination areas were observed. As the temperature of CF/PEEK laminates increases, the delamination areas decrease because of higher initial delaminatin damage energy.

• 한국자동차공학회논문집
• /
• 제2권6호
• /
• pp.66-75
• /
• 1994

In this paper, the effects of temperature change on the impact damages of CF/PEEK laminates are experimentally investigated. Composite laminates used in this experiment are CF/PEEK orthotropic laminated plates, which have two-interfaces$[0^{\circ}_4/90^{\circ}_4]_{9+} A steel ball launched by the air gun collides against CFRP laminates to generate impact damage. The delamination damages are oberved by a scanning acoustic microscope. And various relations are experimentally observed including the impact energy vs. delamination area, the specimen temperature vs. transverse crack, and the impact energy vs. residual bending strength of carbon fiber peek composite laminates subjected to FOD(Foreign Object Damage) under high temperatures.

• 한국환경보건학회지
• /
• 제38권6호
• /
• pp.460-471
• /
• 2012

Objectives: Due to global warming resulting from climate change, there has been increasing interest in the relationship between temperature and mortality. These temperature-related deaths depend on diverse conditions related to a given place and person, as well as on time. This study examined changes in the impact of high temperatures on death in summer, using the effect and burden of elevated temperatures on deaths in Seoul and Daegu. Methods: A Poisson regression model was used to estimate short-term temperature effects on mortality. Temperature-related risks were divided into three time periods of equal length (1996-2000, 2001-2005, and 2006-2010). In addition, in order to compare the impact of high temperatures on deaths, this study calculated the proportion of attributable deaths to population, which simultaneously considers the threshold and the slope above the threshold. Results: The effect and burden of high temperatures on deaths is high in Daegu. However, the impact (i.e. the effect and burden) of elevated summer temperatures on deaths has declined over the past 15 years. Sensitivity analyses using alternative thresholds show the robustness of these findings. Conclusion: This study suggests that the attributable burden of high temperatures on deaths to be more plausible than relative risk or threshold for comparing the health impact of high temperatures across populations. Moreover, these results contain important implications for the development or the adjustment of present and future strategies and policies for controlling the temperature-related health burden on populations.

• Corrosion Science and Technology
• /
• 제7권3호
• /
• pp.145-151
• /
• 2008

Material degradation such as high temperature oxidation of metallic material is a severe problem in energy generation systems or manufacturing industries. The metallic materials are oxidized to form oxide films in high temperature environments. The oxide films act as diffusion barriers of oxygen and metal ions and thereafter decrease oxidation rates of metals. The metal oxidation is, however, accelerated by mechanical fracture and spalling of the oxide films caused by thermal stresses by repetition of temperature change, vibration and by the impact of solid particles. It is therefore very important to investigate mechanical properties and adhesion of oxide films in high temperature environments, as well as the properties in a room temperature environment. The oxidation tests were conducted for Ni and Ni-Co alloy under high temperature corrosive environments. The hardness distributions against the indentation depth from the top surface were examined at room temperature. Dynamic indentation tests were performed on Ni oxide films formed on Ni surfaces at room and high temperature to observe fractures or cracks generated around impact craters. As a result, it was found that the mechanical property as hardness of the oxide films were different between Ni and Ni-Co alloy, and between room and high temperatures, and that the adhesion of Ni oxide films was relatively stronger than that of Co oxide films.

• 한국정보통신학회논문지
• /
• 제4권3호
• /
• pp.697-703
• /
• 2000

임팩트이온화현상은 소자의 크기가 점점 작아지면서, 높은 에너지에 있는 hot carrier 전송 을 해석하기 위해 매우 중요하므로 소자의 시뮬레이션에 정확한 임팩트이온화모델이 필수적이다. 털 연구에서는 의사포텐셜방법을 사용하여 풀밴드모델을 구하고, 임팩트이온화율은 수정된 Keldysh 공식을 이용하여 유도하였다. 본 연구에서는 Gahs 임팩트이은화의 온도의존특성을 조사하기 위하여 Monte Carlo 시뮬레이터를 제작하여 임팩트이온화계수를 구하였다. 결과적으로, 임팩트이온화계수는 300K에서 실험값과 잘 일치하였다. 또한 에너지는 전계가 증가할수록 증가하고, 높은 온도에서는 포논 산란의 emission mode가 높기 때문에 에너지가 감소함을 알 수 있었다. 임팩트이온화의 대수 fitting 함수 식은 온도와 전계에 대해 2차식으로 표현하였다. 대수 fitting 함수의 오차는 대부분 5%이내에 머물렀다. 그러므로 대수식으로 표현된 임팩트 이온화계수는 온도에 의존함을 알았고, 임팩트이온화계수를 구하는데 시간을 절약할 수 있다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2000년도 춘계종합학술대회
• /
• pp.460-464
• /
• 2000

임팩트이온화현상은 소자의 크기가 점점 작아지면서, 높은 에너지에 있는 hot carrier 전송을 해석하기 위해 매우 중요하므로 소자의 시뮬레이션에 정확한 임팩트이온화모델이 필수적이다. 본 연구에서는 의사포텐셜방법을 사용하여 full 밴드모델을 구하고, 임팩트이온화율은 수정된 Keldysh 공식을 이용하여 유도하였다. 본 연구에서는 GaAs 임팩트이온화의 온도와 전계에 대한 의존특성을 조사하기 위하여 Monte Carlo 시뮬레이터를 제작하여 임팩트이온화계수를 구하였다. 결과적으로, 임팩트이온화계수는 300K에서 실험 값과 잘 일치하였다. 또한 에너지는 전계가 증가할수륵 증가하고, 높은 온도에서는 포논산란의 emission mode가 높기 때문에 에너지가 감소함을 알 수 있었다. 임팩트 이온화의 대수 fitting 함수 식은 온도와 전계에 대해 2차 식으로 표현하였다. 대수 fitting 함수의 오차는 대부분 5%이내에 머물렀다. 그러므로 대수 식으로 표현된 임팩트이온화계수는 온도와 전계에 의존함을 알았고, 온도와 전계에 의존하는 임팩트이온화계수를 구하는데 시간을 절약할 수 있다

• 한국안전학회지
• /
• 제11권3호
• /
• pp.44-52
• /
• 1996

An experimental study on the effects of temperature change on the impact damages of CFRP aminates was made through an observation of the interrelations between the Impact energy vs. delamination area, the impact energy vs. residual bending strength, and the delamination area vs. the decreasing of the residual bending strength for CF/EPOXY and CF/PEEK composite laminates subjected to FOD (Foreign Object Damage) under high temperatures.

• Journal of Mechanical Science and Technology
• /
• 제17권6호
• /
• pp.870-878
• /
• 2003

The scale is removed from the strip by high pressure hydraulic descaling at the FSB (Finishing Scale Breaker). Recently, the spray height of nozzle has a trend to be shorter for the purpose of increasing the impact pressure by the high pressure water jet. Here, the nozzle intervals should be decided after considering the impact pressure and the temperature distribution on the strip. In other words, the minimum of impact pressure at the overlap of spray influences the surface grade of the strip due to scale and the overlap distance of the spray affects the temperature variation in the direction of the width of strip. In the present study, the impact pressure of the high pressure water jet is measured by the hydraulic descaling system and calculated with regard to the lead angle of 15$^{\circ}$ and the offset angle of 15$^{\circ}$, and then the temperature distribution and the temperature variation are calculated at the overlap distances of 0 mm, 10 mm, 20 mm, and 30 mm, respectively. The method of setting nozzle intervals is shown by utilizing these results.

• 한국환경과학회지
• /
• 제31권4호
• /
• pp.329-339
• /
• 2022

Better understanding the mechanism of black ice occurrence on the road in winter is necessary to reduce the socio-economic damage it causes. In this study, intensive observations of road weather elements and surface information under the influence of synoptic high-pressure patterns (22^nd December, 2020 and 29^th January, and 25^th February, 2021) were carried out using a mobile observation vehicle. We found that temperature and road surface temperature change is significantly influenced by observation time, altitude and structure of the road, surrounding terrain, and traffic volume, especially in tunnels and bridges. In addition, even if the spatial distribution of temperature and road surface temperature for the entire observation route is similar, there is a difference between air and road surface temperatures due to the influence of current weather conditions. The observed road temperature, air temperature and air pressure in Nongong Bridge were significantly different to other fixed road weather observation points.