• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.1 no.1
• /
• pp.26-39
• /
• 2002

This paper describes design and implementation of home network control protocol for networked home appliances. The proposed network protocol has four-layered protocol structure and device-modem interface structure for the flexibility of modems based on power line communication. The standard message set is specified to guarantee the interoperability between various home appliances The proposed protocol can be easily implemented because it has minimum network overhead.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.6
• /
• pp.1967-1977
• /
• 2014

In this paper, for the development of a safe and reliable DC home appliance suitable for DC home power supply system, we classified a number of inherent problems with help of the comparative analysis of existing AC and new DC home appliance. Several new technical problems of DC home appliances are mainly linked to the DC transient state. Among them, this paper concentrates on start-up inrush current problem, uni-polarity problem, and heavy DC load control problem. And to address these problems, we herein present an implementation of robust safety circuits for DC home appliances. Specifically, we investigate several multi-circuit countermeasures and select the best among them through comparative evaluation, based on theoretical, simulational, and experimental results.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2761-2763
• /
• 1999

In this paper, we analyzed the characteristics of the detected EMF signals used to detect the rotor position in the IPM(Interior Permanent Magnet) BLDC motor and SPM (Surface Permanent Magnet) BLDC motor. The position sensing signal, in the IPM BLDC motors, advances the real rotor position due to the variation of the rotor inductances. This fact was verified by the simulation and experiment.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.1
• /
• pp.51-57
• /
• 2012

This paper provides a safety guideline for DC supplied home appliances through the comparative analysis of existing safety guideline for AC supplied home appliances. For this purpose, a predictive DC home appliance model is suggested and in special international safety standards of AC appliances are also analyzed. Moreover, a DC distribution system is built to verify the validity of the proposed safety guideline. The detailed analyzing process is explained with help of informative experimental results.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.247-250
• /
• 2001

This paper presents a simple and cost effective circuit topology of single-ended type high frequency quasi-resonant PWM inverter using IGBTs, which can operate under wide soft switching operation range based on ZCS for main power switch as compared with a conventional active voltage-clamped ZVS-PWM high frequency quasi-resonant inverter developed previously. In principle, this new circuit topology can efficiently operate under a constant frequency PWM control-based power regulation scheme. In particular, it is noted that the zero current soft switching (ZCS) commutation can achieve for the main active power switch. On the other hand, the zero voltage soft switching (ZVS) commutation can also achieve for the auxiliary active power switch. The operating principle of this high-frequency Inverter treated here and its power regulation characteristics are illustrated on the basis of the simulation and feasible experimental results.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.382-384
• /
• 1996

This paper introduces the controller development of booster multi-pump system with constantly estimated control algorithm. Through analyzing by the experiment of optimal pressure with a certain flow rate. The larger pressure processing apparatus in microprocessor makes optimal water-supplying. This method is implemented with the only pure control algorithm without any other mechanical or circuitry apparatus. Also, Pump's life is lengthened by exchanging simple on, off and rotational inverter control. Optimal condition for pump is adjusted by the inverter control, and compact control panel helps the booster system install in real field.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2594-2596
• /
• 1999

Recently, white good market has interest with inverter product, which has merit to on/off type with respect to energy saving and noise. But, inverter product's cost is rising, because of adding inverter circuit component. To reduce cost, inverter gate drive trend is using HVIC which needs only single voltage. Also using HVIC, designer can compact PCB'size. This paper shows application technique and key point of designing HVIC

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2459-2461
• /
• 1999

FDTD(Finite-Difference Time-Domain) 방법을 이용하여 마이크로웨이브 오븐 내부 전자파를 해석하였고, 열전달방정식을 이용하여 부하의 열 분포를 해석하였다. 다양한 형태의 오프닝구조를 갖는 캐비티에 관하여 수치계산을 수행하였고, 서로 다른 종류의 부하가 존재할 때 부하의 온도 분포가 어떻게 변화하는지 알아보았다. 또한 마그네트론의 안테나와 캡이 존재하는 실제 웨이브가이드를 모델링하여 수치 계산한 후, 적외선사진에 의한 부하의 온도분포와 비교하였다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1902-1903
• /
• 2007

인구의 급속한 고령화에 따른 가정에서의 의료서비스나 건강관리를 위한 홈 헬스케어 및 실버케어 의료기기가 점차적으로 보급, 확대되고 있다. 또한 관련된 가정용 전기기기나 의료기기가 개발됨에 따라 이들기기의 공통 표준화가 필요하며 본 논문에서는 사용시에 가장 중요한 인체에 대한 전기적 안전에 관한 기준연구를 수행하였다.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.12 no.3
• /
• pp.193-197
• /
• 2012

This paper focuses on identifying which appliance is currently operating by analyzing electrical load signature for home energy monitoring system. The identification framework is comprised of three steps. Firstly, specific appliance features, or signatures, were chosen, which are DC (Duty Cycle), SO (Slope of On-state), VO (Variance of On-state), and ZC (Zero Crossing) by reviewing observations of appliances from 13 houses for 3 days. Five appliances of electrical rice cooker, kimchi-refrigerator, PC, refrigerator, and TV were chosen for the identification with high penetration rate and total operation-time in Korea. Secondly, K-NN and Naive Bayesian classifiers, which are commonly used in many applications, are employed to estimate from which appliance the signatures are obtained. Lastly, one of candidates is selected as final identification result by majority voting. The proposed identification frame showed identification success rate of 94.23%.