• Journal of information and communication convergence engineering
• /
• v.5 no.3
• /
• pp.205-208
• /
• 2007

The IEEE 802.11 is a MAC protocol which has been standardized by IEEE for Wireless Local Area Networks (WLANs). In the IEEE 802.11 WLANs, network nodes experiencing collisions on the shared channel need to backoff for a random period of time, which is uniformly selected from the Contention Window (CW). This contention window is dynamically controlled by the Binary Exponential Backoff (BEB) algorithm. However, the BEB scheme suffers from a fairness problem; some nodes can achieve significantly larger throughput than others. This paper proposes a new backoff algorithm for the IEEE 802.11 DCF scheme. This algorithm uses the hop count for considering fairness. It causes flows with high hop count to generate short backoff interval than those with low hop count, thus getting high priority. Therefore, when a collision occurs, the modified IEEE 802.11 DCF assigns higher priority to flow to be close to a destination.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.6
• /
• pp.43-48
• /
• 2009

Wireless mesh networks, unlike Ad-hoc network, has low mobility and multi-path communication between terminals and other networks because it has the backbone structures. Most studies are advanced on finding the optimal routing path in multi-hop wireless mesh network environment. Various routing metric, minimum number of hops(Hop_count) and ETX, ETT metric, are proposed to wireless mesh networks. However, most metrics cannot identify the high throughput routing paths because this metric uses a different measurement parameters in each direction. So actual delivery rate does not provide to this metric. This paper describes the metric and implementation of IETC as a metric. This paper shows the improvement in performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.1
• /
• pp.34-39
• /
• 2005

In this paper, we propose a new prioritized Optical Burst Switching (OBS) protocol based on a hop count, which can provide an efficient utilization in optical Wireless networks. Under several legacy schemes, a switch drops the burst with a shorter time among ones regardless of its traversed hop count. As a result, the dropped burst that have been traversed more hops might cause to waste bandwidth than the one traversed a few hops. Noting that this problem, we propose the Just Enough Time(JET) with a hop count scheme which can reduce the wasted bandwidth by prioritizing the burst traversed more hops over others. From the simulation result, we show that the proposed scheme is advantageous over the legacy schemes in terms of the burst blocking probability and the link utilization.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.8 no.4
• /
• pp.195-200
• /
• 2009

In this paper, we propose a new priority Optical Burst Switching (OBS) protocol based on a hop count, which can provide an efficient utilization in optical wireless networks. Under several legacy schemes, a switch drops the burst with a shorter time among ones regardless of its traversed hop count. As a result, the dropped burst that have been traversed more hops might cause to waste bandwidth than the one traversed a few hops. Noting that this problem, we propose a Just Enough Time (JET) with a hop count scheme which can reduce the wasted bandwidth by prioritizing the burst traversed more hops over others. The simulation results shows that the proposed scheme has more advantages over the legacy schemes in terms of the burst blocking probability and the link utilization.

• Journal of the military operations research society of Korea
• /
• v.18 no.2
• /
• pp.126-139
• /
• 1992

In this paper, the computational problems of packet transmission probability (PTP) in a computer communication network (CCN) under flooding routing are investigated. To avoid a congestion under this routing, two control methods are considerd, i. e., copy storage control and hop count control. Problems of PTP under flooding routings with these two control methods are respectively shown to be equivalent to those of source-to-terminal reliability(STR) with an exception for a case of hop count control where the hop count is less than the length of the longest path. For this exceptional case, an efficient computational algorithm for PTP is developed. This algorithm is proposed as an efficient tool for the determination of hop count which satisfies a given reliability constraint. A numerical example illustrates a proposed algorithm.

• The KIPS Transactions:PartC
• /
• v.15C no.4
• /
• pp.289-296
• /
• 2008

In wireless mesh network, studies on routing protocols have been actively carried out recently, and hop count is used as a major routing metric in destination-sequenced distance-vector (DSDV) routing protocol, which is a representative proactive routing protocol. Although hop-by-hop multi-path (HMP) DSDV and enhanced HMP (EHMP) DSDV routing protocols perform routing by considering both hop count and residual bandwidth within one hop distance nodes, it has a shortcoming that routing is carried out via non-optimal path from the aspect of end-to-end routing. In order to overcome the shortcoming, a cost-aware multi-path (CAMP) DSDV routing protocol is proposed in this paper, which considers hop count and end-to-end minimum residual bandwidth. Simulation results based on NS-2 show that the proposed routing protocol performs better than DSDV, HMP DSDV, and EHMP DSDV protocols from the aspect of throughput and packet delivery ratio, by appropriately using hop count and end-to-end minimum residual bandwidth information and has the same number of management messages with HMP DSDV and EHMP DSDV protocols.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7B
• /
• pp.595-605
• /
• 2012

DV-Hop is one of the well known range-free localization algorithms. The algorithm works well in case of isotropic network since the sensor and anchor nodes are placed in the entire area. However, it results in large errors in case of anisotropic networks where the hop count between nodes is not linearly proportional to the Euclidean distance between them. Hence, we proposed a novel range-free algorithm for anisotropic networks to improve the localization accuracy. In the paper, the Euclidean distance between anchor node and unknown node is estimated by the average hop distance calculated at each hop count with hop count and distance information between anchor nodes. By estimating the unknown location of nodes with the estimated distance estimated by the average hop distance calculated at each hop, the localization accuracy is improved. Simulation results show that the proposed algorithm has more accuracy than DV-Hop.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.7
• /
• pp.1840-1850
• /
• 1998

In this paper, we propose a priority control algorithm using hop count, called HC-PC(Priority Control Algorithm using Hop-Count) for steaming mode CLS, in wide area ATM networks. In our HC-PC algorithm, hop count of packet is increased by one as traverse CLS hop and is used as loss priority when a CLS buffer is congested. That guards packets with higher priority form congestion. The average packet loss probabilities are evaluated via mathematical analysis for HC-PC algorithm case and no priority control case. The simulationresults indicate that our algorithm may offer better performance in terms of loss fairness for pathe length and yield high utilization of newtork resource.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3218-3226
• /
• 2009

A number of on-demand routing protocols for sensor networks have been proposed yet. However, the majority of proposed on-demand routing protocols for sensor networks are not suitable for a relatively poor wireless environment and sensor applications requiring reliable data transmission due to using a hop-count metric for their protocols. In this paper, we proposed a minimum LQI(Link Quality Indicator) based on-demand sensor network routing protocol that is suitable for a relatively poor wireless environment and implemented the proposed routing protocol on a TinyOS. We also compared the implemented protocol with typical hop count based routing protocol by carrying out performance experiments on a multi-hop testbed. The results from these experiments showed that the successful transmission rate of the proposed routing protocol is higher than that of typical hop count based routing protocol over a poor wireless link.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.6 no.3
• /
• pp.1-7
• /
• 2007

In this paper, we propose a new prioritized Optical Burst Switching (OBS) protocol based on a hop count, which can provide efficient utilization in optical networks. Under several legacy schemes, a switch drops the burst with the shortest time regardless of its traversed hop count. As a result, a dropped burst that have been traversed many hops might cause increased bandwidth waste compared to one that has traversed a few hops. To improve this problem, we propose the Just Enough Time (JET) with a hop counting scheme which can reduce the wasted bandwidth by prioritizing the burst traversed many hops over others. From the simulation result, it is preyed, we show that the proposed scheme has advantages against legacy schemes in terms of the burst blocking probability and the link utilization.