• The Journal of Korean Academy of Prosthodontics
• /
• v.32 no.4
• /
• pp.553-564
• /
• 1994

Using Sirognathograph Analyzing System, the patterns of chewing movement were analyzed into opening phase and closing phase, each phase to frontal plane, horizontal plane, and sagittal plane by maruyama's classification. In opening phase, the chewing patterns of frontal plane were classifed into Chopping Opening, Grinding Opening, Concave Opening, Lateral Shift Opening, Vertical Guide Opening, Convergence Opening. Those of horizontal plane were classified into Chopping Opening, Grinding Opening, Concave Opening, Protrusive Shift Opening, Posterior Guide Opening, Convergence Opening. Those of sagittal plane were classified into Normal Opening, Protrusive Shift Opening, Vertical Guide Opening, Convergence Opening. In closing phase, the chewing patterns of frontal plane were classified into Normal Closure, Concave Closure, Lateral Shift Closure, Lateral Guide Closure, Vertical Guide Closure, Convergence Closure, Those of horzontal plane were classified into Normal Closure, Concave Closure, Lateral Shift Closure, Protrusive Shift Closure, Lateral Guide closure, Posterior Guide Closure, Convergence Closure. Those of sagittal plane were classified into Normal Closure, Protrusive Shift Closure, Vertical Guide. Closure, Convergence Closure. Results were summarized as follows : 1. Opening phase in chewing movement The Normal Openings in 3 planes(frontal, horizontal, sagittal), the Concave Openings in frontal plane and horizontal plane, the Vertical Guide Opening in frontal plane and the Posterior Guide Opening in horizontal plane were many observed. 2. Closing phase in chewing movement The Concave Closure in frontal and horizontal plane, the Normal Closure in 3 planes (frontal, horizontal, sagittal), the Concave Closure in horizontal plane were many observed.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.403-406
• /
• 1996

In this paper, the geometry between horizontal and vertical movement of lens is studied for automatic vergence control of horizontal moving axis stereo camera. When the disparity of stereo remains contant, the horizontal movement of camera lens for image disparity and the vertical movement for image focus have linear geometry. Using this linearity, we can control the vergence of stereo camera only by focusing of stereo camera lens.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.1
• /
• pp.19-27
• /
• 2015

Objective: The aim of this study is to investigate how well eye movement times in visual target selection tasks by an eye input device follows the typical Fitts' Law and to compare vertical and horizontal eye movement times. Background: Typically manual pointing provides excellent fit to the Fitts' Law model. However, when an eye input device is used for the visual target selection tasks, there were some debates on whether the eye movement times in can be described by the Fitts' Law. More empirical studies should be added to resolve these debates. This study is an empirical study for resolving this debate. On the other hand, many researchers reported the direction of movement in typical manual pointing has some effects on the movement times. The other question in this study is whether the direction of eye movement also affects the eye movement times. Method: A cursor movement times in visual target selection tasks by both input devices were collected. The layout of visual targets was set up by two types. Cursor starting position for vertical movement times were in the top of the monitor and visual targets were located in the bottom, while cursor starting positions for horizontal movement times were in the right of the monitor and visual targets were located in the left. Results: Although eye movement time was described by the Fitts' Law, the error rate was high and correlation was relatively low ($R^2=0.80$ for horizontal movements and $R^2=0.66$ for vertical movements), compared to those of manual movement. According to the movement direction, manual movement times were not significantly different, but eye movement times were significantly different. Conclusion: Eye movement times in the selection of visual targets by an eye-gaze input device could be described and predicted by the Fitts' Law. Eye movement times were significantly different according to the direction of eye movement. Application: The results of this study might help to understand eye movement times in visual target selection tasks by the eye input devices.

• The korean journal of orthodontics
• /
• v.24 no.3 s.46
• /
• pp.721-733
• /
• 1994

Orthodontic tooth movement is closely related to the stress on the periodontal tissue. In this research the finite element method was used to observe the stress distribution and to find the best condition for effective tooth movement in the case of unilateral molar expansion. The author constructed the model of lower dental arch of average Korean adult and used $.032'\times.032'\times60mm$ TMA wire. The wire was deflected in the horizontal and vertical direction to give the 16 conditions. The following results were obtained ; 1. When the moment and force were controlled properly the movement of anchor tooth was minimized and the movement of moving tooth was maximized. 2. As the initial horizontal deflection increased the buccal displacement of both teeth was also increased. As the initial horizontal deflection increased the lingual movement of anchor tooth and the buccal movement of moving tooth increased. 3. When the initial horizontal and vertical deflection rate was 1.5 the effective movement of moving tooth was observed with minimal displacement of anchor tooth.

• The korean journal of orthodontics
• /
• v.24 no.3 s.46
• /
• pp.673-693
• /
• 1994

Most adults, unlike growing children, have some periodontal problems which can influence the outcome of the orthodontic treatment. In cases where periodontal disease progression resulted in marked reduction of periodontium, orthodontic treatment could result in the worsening of the periodontal conditions, and therefore orthodontic treatment planning in such adult patients requires special considerations for the periodontal problems. This study investigates the effects of horizontal orthodontic tooth movement on the changes in the mesial, distal and furcation areas of the disease affected periodontium of adult dogs with advanced bone loss. Six adult dogs with healthy periodontium were selected, and mandibular 2nd premolars were extracted. In the mandibular 3rd premolars, angular bony defects in the mesial and distal sides, and horizontal bony defects in the furcation areas were created. Those that received the flap operation and plaque control were designated as the control, those that had horizontal tooth movement without plaque control after the flap operation as Experimental group I, those that had horizontal tooth movement under plaque control without the flap operation as Experimental group II, and those that had horizontal tooth movement under plaque control after the flap operation as Experimental group III. The control group was sacrificed 2 months postoperatively, and the experimental groups were sacrificed 5 months after the initiation of tooth movement. Specimens were histologically analyzed under light microscope. The results were as follows; 1. After the horizontal tooth movements, Experimental group I and II showed angular bony defects in the mesial sides of the roots and the distal side of the furcation areas, which correspond to the pressure sides. 2. After the horizontal tooth movements, Experimental group I and II showed decreased level of alveolar bone crest in the distal sides of the roots, which correspond to the tension sides. 3. Long junctional epithelium in the control group has not been replaced by periodontal connective tissue after the horizontal tooth movements. 4. Limited formation of new bone was observed in the angular bony defects in the mesial and distal aspects of the roots in the control group. 5. Inflammatory cell infiltration in the connective tissue was most severe in the Experimental group I, followed by Experimental group II, III, and the control group in that order. These results seem to indicate that plaque control was the most influencing factor in the alteration of the periodontal tissue after the horizontal tooth movements in the periodontal tissue with alveolar bone defects.

• Journal of Oral Medicine and Pain
• /
• v.21 no.2
• /
• pp.369-382
• /
• 1996

The author performed this study to investige the relationship between condylar movements recorded with Pantronicⓡ and mandibular rotational torque movements with BioEGNⓡ. For this study 56 patients with Temporomandibular disorders(TMD) and 30 dental students without any masticatory signs and symptoms were selected as patients group and control group, respectively. The items recorded with Pantronicⓡ(Denar Corp., USA) were immediate side-shift, progressive side-shift, angle of orbiting path, protrusive path and PRI. BioEGNⓡ(Bioelectric gnathography, Bioresearch Inc., USA) were used to measure the amounts of mandibular rotational torque movements in frontal and horizontal plane, and the distance of mandibular translation at incisal area. Amount of mandibular rotational torque movement depicted between the condyles was automatically analysed by angle and difference in frontal and horizontal plane. The obtained data were processed with SAS program and the conclusion of this study were as follows : 1. Mean values of items between patients group and control group in Pantronic measurements were not significantly different except in left protrusive path and in Pantronic Reproducibility Index(PRI). There were no significant difference of condylar paths by preferred chewing side and affected side between the two groups. 2. The amount of mandibular rotational torque movements were differed in frontal angle and difference on protrusion, and in frontal and in horizontal difference on left excursion between the two groups. But the amounts of translatory movements were actually same on all eccentric movements. 3. The amount of mandibular rotational torque movements with splint mere almost not changed from those without splint, with the exception of in horizontal measurements on protrusion. 4. The correlations of items between in Pantronic measurements and in BioEGN measurements wert not consistently, significant, however, generally the ISS related significantly with horizontal torque movement positively, and with frontal torque movement negatively on the contrary, the PSS showed positive correlation with frontal torque movement, and negative correlation with horizontal torque movement.

• Journal of Biomedical Engineering Research
• /
• v.3 no.1
• /
• pp.17-22
• /
• 1982

In this paper, peak velocity characteristics of saccadic eye movements were measured and analyzed as a velocity characteristics of horizontal saccadic eye movement system. Measurements were made with an infrared reflection method, and horizontal saccadic eye movements of 5 normal subject were recorded for the periodic and random pulse targets of 5$^{\circ}$, 10$^{\circ}$, 20$^{\circ}$ , and 30$^{\circ}$ amplitudes.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.1
• /
• pp.87-97
• /
• 2014

In this study, the model tests were conducted on the short piles installed in sands under a horizontal pullout load to investigate their behavior characteristics. From the horizontal loading tests where dimensions of the pile diameter and length, and loading point were varied, the horizontal pullout resistance and the rotational and translational movement pattern of the pile were investigated. As a result, the horizontal pullout resistance of the pile embedded in sands was dependent on the pile length, diameter, loading point, etc. The ultimate horizontal pullout load tended to increase as the loading point (h/L) moved to the bottom from the top of the pile, regardless of the ratio between the pile length and diameter (L/D), reached the maximum value at the point of h/L = 0.75, and decreased afterwards. When the horizontal pullout load acted on the upper part above the middle of the pile, the pile rotated clockwise and moved to the pullout direction, and the pivot point of the pile was located at 150-360mm depth below the ground surface. On the other hand, when the horizontal pullout load acted on the lower part of the pile, the pile rotated counterclockwise and travelled horizontally, and the rotational angle was very small.

• Physical Therapy Korea
• /
• v.23 no.3
• /
• pp.68-75
• /
• 2016

Background: Shoulder horizontal adduction (HA) is performed in many activities of daily living. The limited range of motion (LROM) of HA is affected by the tightness of the posterior deltoid, infraspinatus, teres major, and posterior capsule of glenohumeral joint. The LROM of shoulder HA contributes to excessive scapular abduction. Objects: The aim of this study is to compare the scapular abduction distance and three-dimensional displacement of the scapula during shoulder horizontal adduction between subjects with and without the LROM of shoulder HA. Methods: 24 subjects (12 people in LROM group and 12 people in normal ROM group) participated. Subjects with less than $115^{\circ}$ of HA ROM were included in LROM group. Shoulder HA was performed 3 times for measuring scapular abduction distance and three-dimensional displacement of the scapula. Tape measure was used for measuring scapular abduction distance. Scapular abduction distance was normalized by dividing the scapular size. Polhemus Liberty was used for measuring the three-dimensional displacement of the scapula. Results: Normalized scapular abduction distance was significantly greater in LROM group than normal ROM group (p<.001). Three-dimensional displacement of the scapula during shoulder HA was greater in LROM group than normal ROM group (p<.05). Conclusion: LROM group had a greater scapular abduction and three-dimensional displacement of the scapula during shoulder HA compared to normal ROM group.

• The korean journal of orthodontics
• /
• v.13 no.2
• /
• pp.131-146
• /
• 1983

Faces of normal occlusion, open bite and class III malocclusion were measured using cephalogram in 190 male and female subjects. Using M.K.G., types of mandibular movement, amount of horizontal and vertical movement were studied in relation to occlusal types, and were compared with each other. The following conclusions were obtained. 1. Movement of protrusion was most different in relation to occlusal type. 2. In normal occlusion, maximal protrusion were horizontal 7.66mm, vertical 3.01mm in male, 6.41, 2.92mm respectively in female and maximal inferior position were -24.32, 33.63mm in male,-23.48, 32.27mm respectively in female. 3. Angle between maximal inferior position and horizontal plane were $53.51^{\circ}$ in male, $53.84^{\circ}$ in female. 4. Generally, amount of mandibular movement was greater in male than female. 5. In open bite, path of protrusion was nearly straight without curve $69.2\%$ in male, $70.2\%$ in female. 6. In class III malocclusion, angle and amount of protrusion were smaller than normal occlusion and path was directed anterior-superiorly in $22.7\%$. 7. There was no correlation coefficient between measurement of face and mandibular movement.