• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.857-862
• /
• 2004

This paper analyzes properties of the recently developed nonlinear optimization method, Dynamic Encoding Algorithm for Searches (DEAS) [1]. DEAS locates local minima with binary strings (or binary matrices for multi-dimensional problems) by iterating the two operators; bisectional search (BSS) and unidirectional search (UDS). BSS increases binary strings by one digit (i.e., zero or one), while UDS performs increment or decrement to binary strings with no change of string length. Owing to these search routines, DEAS retains the optimization capability that combines the special features of several conventional optimization methods. In this paper, a special feature of BSS and UDS in DEAS is analyzed. In addition, a effective global search strategy is established by using information of DEAS. Effectiveness of the proposed global search strategy is validated through the well-known benchmark functions.

• 전산구조공학
• /
• 제3권4호
• /
• pp.24-28
• /
• 1990

I-DEAS System Dynamics Analysis는 컴퓨터에 의한 해석적 동특성 파악이 어려운 구조요소와 해석적 동특성 파악이 가능한 구조요소가 함께 결합되어 있는 복잡한 구조물에 대하여, 전자의 구조요소에 대해서는 실험에 의해 추출된 동특성을 후자의 구조요소에 대해서는 컴퓨터 해석에 의한 동특성을 사용하여 전체 구조 시스템에 대한 동적해석을 가능하게 하는 프로그램이다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.324-329
• /
• 2005

Dynamic Encoding Algorithm for Searches (DEAS) which is known as a fast and reliable non-gradient optimization method, was proposed [1]. DEAS reaches local or global optimum with binary strings (or binary matrices for multi-dimensional problem) by iterating the two operations; bisectional search (BSS) and unidirectional search (UDS). BSS increases binary strings by one digit (i.e., 0 or 1), while UDS performs increment or decrement of binary strings in the BSS' result direction with no change of string length. Because the interval of UDS exponentially decreases with increment of bit string length (BSL), DEAS is difficult to escape from local optimum when DEAS falls into local optimum. Therefore, this paper proposes hopping UDS (HUDS) which performs UDS by hopping as many as BSL in the final point of UDS process. HUDS helps to escape from local optimum and enhances a probability searching global optimization. The excellent performance of HUDS will be validated through the well-known benchmark functions.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권2호
• /
• pp.38-47
• /
• 2001

This paper decribes the development of computer-aided design of a very precise progressice die for lead frame of semiconductor chip. The approach to the system is based on knowledgr-based rules. Knowledge of fie이 experts. This system has been written in AutoLISP using AutoCAD ona personal computer and the I-DEAS drafting programming Language on the I-DEAS mater series drafting with on HP9000/715(64) workstation. Data exchange between AutoCAD and I-DEAS master series drafting is accomplished using DXF(drawing exchange format) and IGES(initial graphics exchange specification) files. This system is composed of six main modules, which are input and shape treatment, production feasibility check, strip layout, data conversion, die layout, and post processing modules. Based on Knowledge-based rules, the system considers several factors, such as V-notches, dimple, pad chamfer, spank, cavity punch, camber, coined area, cross bow, material and thickness of product, complexities of blank geometry and punch profiles, specifications of available presses, and the availability of standard parts. As forming processes and the die design system using 2D geometry recognition are integrated with the technology of process planning, die design, and CAE analysis, the standardization of die part for lead frames requiting a high precision process is possible. The die layout drawing generated by the die layout module s displayed in graphic form. The developed system makes it possible to design and manufacture lead frame of a semiconductor more efficiently.

• 한국정밀공학회지
• /
• 제16권6호
• /
• pp.123-132
• /
• 1999

This paper describes a research work of developing computer-aided design of lead frame, semiconductor, with blanking operation which is very precise for progressive working. Approach to the system is based on the knowledge-based rules. Knowledge for the system is formulated from pasticity theories, experimental results and the empirical knowledge of field experts. This system has been written in AutoLISP on the AutoCAD using a personal computer and in I-DEAS Drafting Programming Language on the I-DEAS Master Series Drafting with Workstation, HP9000/715(64). Transference of data between AutoCAD and I-DEAS Master Series Drafting is accomplished by DXF(drawing exchange format) and IGES(initial graphics exchange specification) methods. This system is composed of five modules, which are input and shape treatment, production feasibility check, strip-layout, data-conversion and die-layout modules. The process planning and Die design system is designed by considering several factors, such as complexities of blank geometry, punch profiles, and the availability of a press equipment and standard parts. This system provides its efficiecy for strip-layout, and die design for lead frame, semiconductor.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.655-660
• /
• 2004

The pipes in the outdoor unit of an air conditioner are designed to reduce the vibration effect of the compressor. Three-dimensional structure of the pipe could provide various design choices and the resultant vibration characteristics of the outdoor units. A design program has been developed for an eligible parametric study of pipe design and automatic vibration analysis using commercial software, I-DEAS, and its macro. Optimal design of pipe configuration has been performed using the commercial software, iSIGHT. The optimized design shows 70 percents improvement in the vibration characteristics of the outdoor unit of an air conditioner.

• 논리연구
• /
• 제13권2호
• /
• pp.117-134
• /
• 2010

'모호함'의 모호성을 정당화하는 소렌센의 논증은, '모호함'에 대한 직관적 이해를 체계적으로 정당화한다는 측면에서 매우 중요한 의미를 갖는다. 그러나 필자는 이러한 소렌센의 논증이 성립하지 않음을 보이고자 한다. 소렌센의 논증에 대한 가장 일반적인 비판은, 'n-작음'이라는 용어에 기초하는 그의 논증은 '모호함'의 모호함이 아니라 '작음'의 모호함을 입증할 뿐이라는 것이다. 그런데 이러한 비판에 근거한 디즈와 헐의 논의는, 소렌센의 더미를 구성하는 "'n-작음'은 모호하다."의 주어는 언급된 정확한 용어라는 바르찌의 주장에 의해 반박된다. 그러나 필자는 "'n-작음'은 모호하다."의 진리값 결정에 술어 '모호함'이 아무런 역할을 수행하지 못함을 보임으로써 바르찌의 주장을 반박하고, 소렌센의 논증으로부터 정당화되는 것은 '작음'의 모호성뿐임을 보이고자 한다. 물론 필자 역시 '모호함'이 모호하다는 것에는 동의한다. 본 논문을 통해 필자가 주장하는 것은 이러한 '모호함'의 특징에 대한 소렌센의 정당화가 성립하지 않는다는 것뿐이다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1340-1345
• /
• 2003

In this paper, an integrated optimal design software system for structural components has been developed which interfaces existing commercial codes for CAD, CAE and Optimization. They include specialized optimal design software codes such as iSIGHT and VisualDOC, optimization module imbedded in CAD software developed by CAD developers, and optimal design software systems based on API of commercial CAD software. The advantages of the CAD imbedded optimal design approach and those of specialized optimal design software are taken to develop the system. The user defines optimal design formulation in the user interface for problem definition in the CAD control stage, where design variables are directly selectable from the CAD model and various properties and performance functions defined. The commercial CAD codes, Open I-DEAS are used for the development. The resulting software is minimally connected to CAD and CAE systems while keeping maximum independence from each other. This assures flexibility and freedom for problem definition. Fatigue life optimization is taken as a nontrivial application area. As a specific example, the shape design of a knuckle part of an automobile is performed, where the minimum fatigue life over the material domain in terms of the number of cycles of a curb strike are maximized under the constraint of not exceeding the current mass. The fatigue life has been improved by four times of the initial life. The developed software is illustrated to maintain the advantages of existing optimal design software systems while improving independency and flexibility.

• 한국정밀공학회지
• /
• 제16권12호
• /
• pp.230-238
• /
• 1999

This paper describes a research work of developing computer-aided design of lead frame, semiconductor, with blanking operation which is very precise for progressive working. Approach to the system is based on the knowledge-based rules. Knowledge for the system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. This system has been written in AutoLISP on the AutoCAD using a personal computer and in I-DEAS Drafting Programming Language on the I-DEAS Master Series Drafting with Workstation, HP9000/715(64) and tool kit on the ESPRIT. Transference of data among AutoCAD, I-DEAS Master Series Drafting, and ESPRIT is accomplished by DXF(drawing exchange format) and IGES(initial graphics exchange specification) methods. This system is composed of six modules, which are input and shape treatment, production feasibility check, strip-layout, die-layout, modelling, and post-processor modules. The system can design process planning and Die design considering several factors and generate NC data automatically according to drawings of die-layout module. As forming process of high precision product and die design system using 2-D geometry recognition are integrated with technology of process planning, die design, and CAE analysis, standardization of die part in die design and process planning of high pression product for semiconductor lead frame is possible to set. Results carried out in each module will provide efficiencies to the designer and the manufacturer of lead frame, semiconductor.

• 한국산학기술학회논문지
• /
• 제14권10호
• /
• pp.4713-4718
• /
• 2013

플라스틱 사출성형은 원재료를 한 번의 가공으로 최종 제품을 만들 수 있는 장점을 가지고 있다. 사출성형을 위해서는 금형의 설치, 플라스틱 수지의 용융, 용융수지의 사출, 성형품의 취출 등을 위하여 사출성형기는 반드시 필요하다. 사출성형기는 여러 가지 방법으로 구분되는데, 본 연구는 현재 국내 A사에서 생산되고 있는 토글식 사출성형기를 대상으로 한다. 연구내용으로는 사출성형기의 여러 부품 및 주요한 플레이트에 대하여 3차원 모델링을 실시하고, 3차원 캐드상에서 조립하여 사출성형기의 전체 구조를 파악하였다. 그리고 에너지 및 생산비 절감을 위하여 주요 플레이트에 대하여 유한요소법을 이용하여 사출압력과 형체력 적용시의 플레이트에 발생하는 스트레스와 변위를 분석하고, 그 결과를 토대로 플레이트를 개선하였다. 개선된 플레이트를 대상으로 유한요소 재해석을 통하여 고정플레이트는 약 2.7%, 이동 플레이트는 약 3.5%, 테일 스톡은 약 6.9%의 중량 감소 결과를 확인하였다.