• 분석과학
• /
• 제16권5호
• /
• pp.358-367
• /
• 2003

이 연구는 먼저 침전물 속에 major 원소 (Al, Ca, K, Fe, Mg)를 측정하기위해 ICP-MS를 이용하여 분석방법을 개발하였다. Cool ICP-MS로 major원소를 분석한 결과 Normal ICP-MS보다 더 좋은 분석 결과를 얻었다. 또한 그 결과를 NAA의한 분석 결과와 비교해 보았다. NAA는 고체시료의 비파괴 미량분석법이며 침전물 속에 major원소들에 대한 측정 결과는 ICP-MS보다 더 좋은 결과를 얻었다. 또한 침전물 속에 minor 원소 (Cr, Ce, U, Co, Pb, As, Se)를 측정하기 위해 ICP-MS를 이용하여 분석방법을 개발하였다. 표준 검정곡선으로 분석한 결과 모체방해효과 때문에 정확도가 좋지 않았다. 그래서 ICP-MS를 이용하여 내부표준물법으로 minor 원소들을 분석했을 때 결과값이 향상됨을 알 수 있었다. 그 결과를 NAA분석법과 비교해도 ICP-MS를 이용한 방법이 더 좋은 결과였음을 알 수 있었다. 두 가지의 분석방법은 침전물 속에 존재하는 minor 원소를 충분히 측정할 수 있다. 그러므로 NAA 분석법이 모체가 복잡한 환경시료를 분석하는데 중요한 역할을 하며, ICP-MS 또한 NAA 분석법으로는 분석 할 수 없는 납을 검출할 수 있기 때문에 환경시료를 분석하는데 두 분석법은 상호 보완할 수 있는 중요한 분석법이다.

• Journal of Microbiology and Biotechnology
• /
• 제8권6호
• /
• pp.685-691
• /
• 1998

Baculovirus Hyphantrin. cunea nuclear polyhedrosis virus (HcNPV) insecticide containing the insecticidal protein (ICP) gene from Bacillus thuringiensis subsp. kurstaki HD1 was constructed using a lacZ-HcNPV system. The ICP ($\delta$-endotoxin) gene was placed under the control of the polyhedrin gene promoter of the HcNPV. A polyhedrin-negative virus was derived and named ICP-HcNPV insecticide. Then, the insertion of the ICP gene in the ICP-HcNPV genome was confirmed by Southern hybridization analysis. Polyacrylamide gel electrophoresis (PAGE) analysis of the Spodoptera frugiperda cell extracts infected with the ICP-HcNPV showed that the ICP was expressed in the insect cells as 130 kDa at 5 days post-infection. The ICP produced in the cells was present in aggregates. When extracts from the cells infected with the ICP-HcNPV were fed to 20 Bombyx mori larvae, the following mortality rate was seen; 8 larvae at 1 h, 10 larvae at 3 h, and 20 larvae at 12 h. These data indicate that the B. thuringiensis ICP gene was expressed by the baculovirus insecticide in insect cells and there was a high insecticidal activity. The biological activities of the recombinant virus ICP-HcNPV were assessed in conventional bioassay tests by feeding virus particles and ICP to the insect larvae. The initial baculovirus insecticide ICP-HcNPV was developed in our laboratory and the significance of the genetically engineered virus insecticides is discussed.

• 전자공학회논문지S
• /
• 제35S권12호
• /
• pp.69-76
• /
• 1998

본 논문에서는 ICP (Iterative Closest Point) 알고리즘을 이용한 영상등록에서의 회전 성분 신뢰도를 추정할 수 있는 행렬을 유도하 였다. ICP 알고리즘 결과의 신뢰도는 영상등록을 하려는 입력 물체의 모양에 따라 다르다. 보통 원통과 같은 어떤 축에 대한 회전체보 다는 더 복잡하고 두드러진 특징이 많은 물체일수록 신뢰도가 높은 결과를 얻게 된다. 본 논문에서는 ICP 알고리즘으로 구한 값의 신뢰도를 점으로 표현되는 입력물체에서의 각 점의 위치와 법선 벡터에 대한 식으로 나타내었다. 입력물체에 잡음이 들어갔을 때, 이로 인한 ICP 결과의 오차를 제시한 신뢰도를 이용해 추정하였다. 마지막으로 타원체 합성영상에 대한 신뢰도와 잡음이 들어갔을 때의 ICP 결과의 오차를 컴퓨터 모의실험으로 비교 분석하여 이론치와 부합되는 것을 보였다.

• 분석과학
• /
• 제13권2호
• /
• pp.215-221
• /
• 2000

생활폐기물 소각처리시설에서 발생하는 비산재의 pH와 입자분포 상태 등 물성치를 측정하였으며, XRF와 ICP-AES 및 ICP-MS를 이용하여 성분원소를 분석하였다. XRF 분석결과 비산재의 주성분 원소는 Ca, K, Na, Si, Al, Cl, S 및 O로 확인되었으며, XRD 분석결과 이들 원소는 염화물과 수산화물, carbonate, 산화물 및 복합화합물의 형태로 존재하는 것으로 나타났다. 미량원소로 함유된 중금속류의 정량을 위하여 시료의 전처리 없이 XRF를 이용한 직접분석과 마이크로파 분해장치를 사용하여 시료를 분해시킨 뒤 ICP-AES 및 ICP-MS를 이용한 분석결과를 비교하여 보았는데 두 가지 분석방법의 곁과가 잘 일치하였으며, Zn, Pb, Cu, Cr, Cd의 순으로 함량이 높게 나타났다.

• 한국표면공학회지
• /
• 제46권2호
• /
• pp.55-60
• /
• 2013

Superhard TiN coatings were fabricated by DC and ICP (inductively coupled plasma) assisted magnetron sputtering techniques. The effect of ICP power, ranging from 0 to 300 W, on coating microstructure, preferred orientation mechanical properties were systematically investigated with HR-XRD, SEM, AFM and nanoindentation. The results show that ICP power has a significant influence on coating microstructure and mechanical properties of TiN coatings. With the increasing of ICP power, coating microstructure evolves from the columnar structure of DC process to a highly dense one. Grain sizes of TiN coatings were decreased from 12.6 nm to 8.7 nm with increase of ICP power. The maximum nanohardness of 67.6 GPa was obtained for the coatings deposited at ICP power of 300 W. Preferred orientation in TiN coatings also vary with ICP power, exerting an effective influence on film nanohardness.

• 한국산업보건학회지
• /
• 제11권3호
• /
• pp.235-240
• /
• 2001

This study was performed to compare the lead levels of 20 quality control standard samples(KOSHA:18-2000) and 72 field samples in lead-acid battery manufacturing plant between ICP and portable-XRF methods. 1. While the proficiencies of 20 quality control standard samples by ICP were 100%, those of analytic result values by XRF were 75%. 2. The correlation coefficient(r) between the reference values for quality control (REF) and the analytic result values by ICP (ICP) was 1.0(p<0.05), and simple linear regression equation and the coefficient(R2) were REF = -0.0009 + 1.016 ICP and 0.9997, respectively. 3. The correlation coefficient(r) between the analytic result values of quality control standard samples by ICP (ICP) and by XRF (XRF) was 0.975(p<0.05), and simple linear regression equation and the coefficient(R2) were ICP = -0.0003 + 1.002 XRF and 0.950, respectively. 4. The correlation coefficient(r) between the analytic result values for lead samples of a lead-acid battery manufacturing plant by ICP (ICP) and by XRF (XRF) was 0.993(p<0.05), and simple linear regression equation and the coefficient(R2) were ICP = -2.058 + 0.996 XRF and 0.987, respectively. 5. While the frequency distributions of XRF /ICP(Ratio) for each ICP concentration levels in a lead-acid battery manufacturing plant revealed high proportion in ratio range of 0.876-1.125 than in ration range of 1.126-1.375. Also, ICP concentration level in ration range of 0.786-1.125 was increased with increase of frequency distribution of XRF/ICP. 6. The limit of detection of XRF on lead was determined to be $6.11{\mu}g$/filter The data presented in this study indicated that relationship for lead level of quality control samples and field samples in a lead -acid battery manufacturing plant by ICP and portable-XRF methods was proved. The practicing industrial hygienist can use portable-XRF to produce a rapid on-site determination of lead exposure that can immediately becommunicated to workers and help identify appropriate levels of personal protection.

• 한국미생물·생명공학회지
• /
• 제32권2호
• /
• pp.110-116
• /
• 2004

B. thuringiensis subsp. kurstaki HD1 살충성 결정체 단백질 icp 유전자를 클로닝하여 두개의 클론 pHLNl-80(＋) 및 pHLN2-80(－)을 제조하였으며, pHLNl-80(＋) 클론에는 icp 유전자의 전사개시부위가 정방향으로 클론이 되었고, 유전자 프로모터의 일부인 -80 bp를 가지고 있고, pHLN2-80(－) 클론은 핀자의 전사개시부위가 역방향으로 클로닝이 되었다. 상기 두 클론을 대장균에서 발현을 조사한 결과 icp 유전자가 역으로 삽입된 pHLN2-80(－) 클론은 pHLNl-80(＋)클론보다 ICP발현량이 현격히 증가하는 것을 확인하였다. pHLN2-80(－) 플라스미드에서의 -80 bp 프로모터에서 SD서열(-14 bp sequences) 상류부위를 제거한 후 동일한 살충성 결정체 단백질 icp 유전자의 과다발현 현상이 일어나는지 조사하기 위해 icp 유전자가 역방향으로 클로닝된 pHLRBSl-14와 icp 유전자가 정방향으로 클로닝된 pHLRBS2-14 클론을 제조하였다. 또한 상이한 클로닝 운반체에서도 과다 발현이 일어나는지를 보기위하여 pHLNl-80(＋)과 pHLN2-80(－) 플라스미드에서와 동일한 구조가 되도록 icp 유전자를 pUC18과 pUC19플라스미드에 각각 클로닝하여 pHLNUCl-80과 pHLNUC2-80 클론을 제조하였다. pHLRBSl-14과 pHLRBS2-14클론을 대장균에서 발현을 시킨 후에 파쇄하여 SDS-PAGE와 Western blot으로 분석을 한 결과는 클론 pHLRBSl-14는 클론 pHLRBS2-14보다 많은 양의 ICP를 생산하였고, pHLRBSl-14는 pHLN2-80(－) 클론 보다는 적게 ICP를 생산하였다. 이러한 발현 현상은 -80 bp promoter 에서 결실된 SD서열의 상류부위가 발현에 직접적인 영향을 주고 있다는 것을 의미한다. pHLNUC1-80이 역방향으로 클로닝된 pHLNUC2-80 클론보다 적게 ICP 의 발현을 하였다. 이 결과는 상기 클론이 icp 유전자 과다발현이 특정 클로닝 운반체에만 국한되어 일어나는 것이 아니며 유전자와 프로모터 간의 구조적 배열에 의하거나 프로모터에 있는 transcription-supressing regions이 교란되어서 일어난 것임을 시사한다. 그러나 왜 전사개기부위가 역삽입의 경우에 과다발현이 되는지 아직은 판단하기 어려우며 앞으로 더욱 연구를 계속하여야 할 과제로 남아있다.

• 한국대기환경학회지
• /
• 제20권3호
• /
• pp.397-409
• /
• 2004

There has been few studies of either domestic or international to apply CCT-ICP-MS for the precise analysis of As and Cr components associated with airborne particulate matter. To date, the use of CCT-ICP-MS is strongly recommended for the accurate analysis of the toxic trace metals; this is because CCT-ICP-MS technique prevents polyatomic spectral interferences involved in the determination of As and/or Cr components. Taking advantage of CCT-ICP-MS technique, the measurements of about 20 metals were undertaken in this study. The standard reference material (NIST SRM 2783) was used for analytical quality control. To improve analytical accuracy and of acid efficiency, we selected nitric acid based on a test of three kinds of acid for microwave digestion method 1 ) nitric acid. 2) nitric acid and hydrogen peroxide. and 3) nitric acid and perchloric acid. When this method was employed, relative errors to SRM values of Al, As, Cr Fe, Mg, Mn, Pb, Sb, V, and Zn fell below 20%, while those or Ca, Si, and Ti were higher than 20%. The overall results of our study show that the concentrations of As and V determined by CCT-ICP-MS were satisfied with the certificated values within a relative error of 20e1c, whereas those determined by ICP-MS were 10 times higher than the certificated values.

• 한국세라믹학회지
• /
• 제49권6호
• /
• pp.556-560
• /
• 2012

Nanocrystalline CrN coatings were deposited by DC and ICP-assisted magnetron sputtering on Si (100) substrates. The influences of the ICP power on the microstructural and crystallographic properties of the coatings were investigated. For the generation of the ICP, radio frequency was applied using a dielectric-encapsulated coil antenna installed inside the deposition chamber. As the ICP power increased from 0 to 500W, the crystalline grain size decreased. It is believed that the decrease in the crystal grain size at higher ICP powers is due to resputtering of the coatings as a result of ion bombardment as well as film densification. The preferential orientation of CrN coatings changed from (111) to (200) with an increase in the ICP power. The ICP magnetron sputtering CrN coatings showed excellent surface roughness compared to the DC magnetron sputtering coatings.

• Journal of Korean Neurosurgical Society
• /
• 제66권5호
• /
• pp.543-551
• /
• 2023

Objective : This study aimed to investigate the current status of intracranial pressure (ICP) monitoring in patients with severe traumatic brain injury (sTBI) in Korea and the association between ICP monitoring and prognosis. In addition, a survey was administered to Korean neurosurgeons to investigate the perception of ICP monitoring in patients with sTBI. Methods : This study used data from the second Korea Neurotrauma Databank. Among the enrolled patients with sTBI, the following available clinical data were analyzed in 912 patients : Glasgow coma scale score on admission, ICP monitoring, mortality, and extended Glasgow outcome scale score at 6 months. In addition, we administered a survey, entitled "current status and perception of ICP monitoring in Korean patients with sTBI" to 399 neurosurgeons who were interested in traumatic brain injury. Results : Among the 912 patients, 79 patients (8.7%) underwent ICP monitoring. The mortality and favorable outcome were compared between the groups with and without ICP monitoring, and no statistically significant results were found. Regarding the survey, there were 61 respondents. Among them, 70.4% of neurosurgeons responded negatively to performing ICP monitoring after craniectomy/craniotomy, while 96.7% of neurosurgeons responded negatively to performing ICP monitoring when craniectomy/craniotomy was not conducted. The reasons why ICP monitoring was not performed were investigated, and most respondents answered that there were no actual guidelines or experiences with post-operative ICP monitoring for craniectomy/craniotomy. However, in cases wherein craniectomy/craniotomy was not performed, most respondents answered that ICP monitoring was not helpful, as other signs were comparatively more important. Conclusion : The proportion of performing ICP monitoring in patients with sTBI was low in Korea. The outcome and mortality were compared between the patient groups with and without ICP monitoring, and no statistically significant differences were noted in prognosis between these groups. Further, the survey showed that ICP monitoring in patients with sTBI was somewhat negatively recognized in Korea.