• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.3
• /
• pp.293-296
• /
• 2012

SOC test methodology in ultra deep submicron (UDSM) technology with reasonable test time and cost has begun to satisfy high quality and reliability of the product. A novel hierarchical test architecture using IEEE standard 1149.1, 1149.7 and 1500 compliant facilities is proposed for the purpose of supporting flexible test environment to ensure SOC test methodology. Each embedded core in a system-on- a-chip (SOC) is controlled by test access ports (TAP) and TAP controller of IEEE standard 1149.1 as well as tested using IEEE standard 1500. An SOC device including TAPed cores is hierarchically organized by IEEE standard 1149.7 in wafer and chip level. As a result, it is possible to select/deselect all cores embedded in an SOC flexibly and reduce test cost dramatically using star scan topology.

• Journal of Korea Multimedia Society
• /
• v.19 no.3
• /
• pp.595-602
• /
• 2016

With the evolution and development of many kinds of healthcare devices and techniques, u-health standards have emerged as a major issue. Yet, most legacy medical devices and systems are still being used without deployment of the standards. Therefore, it is required to support backward compatibility for u-health standard-compliant systems to communicate with legacy non-standard medical and healthcare devices. This paper proposes a new scheme to support backward compatibility of IEEE 11073 system by adding a codec module to IEEE 11073 agent. The codec converts data sent by non-standard health devices to IEEE 11073 MDER data. Plus, we implemented the proposed IEEE 11073 agent with an Intel Edison board which is one of popular open source H/W platforms. The IEEE 11073 manager of the proposed system can monitor and control legacy non-standard devices through the proposed agent system. In our experimental results, we examined the proposed system can support interoperability between u-health standard and non-standard devices and contribute to the growth and expansion of u-health services.

• Journal of Sensor Science and Technology
• /
• v.16 no.2
• /
• pp.150-158
• /
• 2007

The IEEE 1451 publication are available, this standard defines interface between sensor and processor, and plug and play in processor is possible. Also, Intelligence of sensor was possible because sensor includes transducer electronic data sheet (TEDS). In IEEE 1451 standards, IEEE 1451.4 is suitable standard in single sensor, and IEEE 1451.2 is suitable standard in multi-sensors (array sensor). In this paper, apply IEEE 1451 to electronic tongue system. In the case of electronic tongue system, because array sensor is used, it is that complex and difficult to apply IEEE 1451.4 that is standard for single sensor. In this paper, apply IEEE 1451.2 for array sensor to design of electronic tongue system. Communication interface method of IEEE 1451.2 for electronic tongue system is presented, and implemented TEDS of electronic tongue system.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.2
• /
• pp.119-127
• /
• 2011

The paper surveys various analytical models for IEEE 802.11 medium access control protocols and critically discusses recent issues developing in wireless mobile ad hoc networks and their MACs. The surveyed MAC protocols include the standard IEEE 802.11 MAC suites such as IEEE 802.11 DCF, IEEE 802.11 PCF, IEEE 802.11e EDCA, and IEEE 802.11 ad hoc mode; and also the newer, de facto MAC protocols. We study the analytic models of the standard MAC suites followed by the newer analytic models that have been published in recent years. Also, the paper tries to include most of current literatures discussing analytic modeling of MAC in conjunction to some critical issues such as contention among ad hoc nodes, hidden terminal problems, and real-time service support.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.467-469
• /
• 2003

IEC(International Electrotechnical Commission) 62271-100 has been adopted for the design test of circuit breaker which is used as the main protecting device of power system. But, it is also necessary to separately receive the testing certificate in accordance with ANSI/IEEE standard for getting into the american market. Up to now, several domestic companies have completed the ANSI/IEEE testing in medium circuit breaker of distribution system, but they recently started the ANSI/IEEE testing in ultra high-voltage class of transmission and substation system. This paper introduces the testing techniques and its results for the making and breaking performance of 145kV, 40kA $SF_6$ gas circuit breaker which was firstly performed in KERI(Korea Electrotechnology Institute) by the ANSI/IEEE standard.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.3
• /
• pp.62-73
• /
• 2012

IEEE 802.15.4 standard which has low-speed, low-power, low-cost can be efficiently used in wireless sensor network environment. Among various topologies used in IEEE 802.15.4 standard, a cluster-tree topology which has many nodes in it, transmit delay, energy consumption and data loss due to traffic concentration around the sink node. In this paper, we propose the MRS-DCA algorithm that minimizes conflicts between packets for efficient data transmission, and dynamically allocates the active period for efficient use of limited energy. The MRS-DCA algorithm allocates RP(Reservation Period) to the active period of IEEE 802.15.4 and guarantees reliable data transmission by allocating RP and CAP dynamically which is based on prediction using EWMA. The comparison result shows that the MRS-DCA algorithm reduces power consumption by reducing active period, and increasing transmission rate by avoiding collision.

• Convergence Security Journal
• /
• v.11 no.1
• /
• pp.33-38
• /
• 2011

Current IEEE 802.11 standard is very vulnerable that between the AP and STA authentication and security mechanisms is widely known. Therefore, IEEE has proposed security architecture RSN (Robust Security Network) for 802.11. RSN is used the access control, authentication, and key management based on the IEEE 802.1X standard. In this paper, IEEE 802.1X or 802.11 a combination of several models proposed for the vulnerability, and session hijacking or MiM (Man-in the-Middle) attacks to respond, the authentication mechanism Was designed to the access control between the STA and the AP.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.3
• /
• pp.293-299
• /
• 2016

Recently, as IoT (Internet of Things) becomes more important, low cost implementation of sensor nodes also becomes critical issues for two well-known standards, IEEE 802.15.4 and IEEE 802.15.6 which stands for WPAN (Wireless Personal Area Network) and WBAN (Wireless Body Area Network), respectively. This paper presents the area-optimized AES-CCM (Advanced Encryption Standard - Counter with CBC-MAC) hardware security engine which can support both IEEE 802.15.4 and IEEE 802.15.6 standards. First, for the low cost design, we propose the 8-bit AES encryption core with the S-box that consists of fully combinational logic based on composite field arithmetic. We also exploit the toggle method to reduce the complexity of design further by reusing the AES core for performing two operation mode of AES-CCM. The implementation results show that the total gate count of proposed AES-CCM security engine can be reduced by up to 42.5% compared to the conventional design.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6B
• /
• pp.875-887
• /
• 2010

The workgroup of IEEE 802 proposed the IEEE 802.16 standard, also known as WiMAX, to provide broadband wireless access (BWA). The standard specifies two operational modes, one is popular PMP mode, and the other is optional mesh mode. In the mesh mode, the network entry process-NetEntry is the pivotal procedure for mesh network topology formulation and thus, influences the accessibility of whole mesh network. Unfortunately, the NetEntry process suffers from the hidden neighbor problem, in which new neighborship emerges after a new node comes in and results in possible collisions. In this paper, we propose a new SN-protected NetEntry process to address the problem. Simulation results show that the new proposed NetEntry process is more stable compared with the standard-based NetEntry process.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.528-532
• /
• 2005

As the current IEEE 802.11 wireless LAN standard provides the unified channel access procedure for each traffic service without considering its own traffic characteristics, it is difficult to get its differentiated service qualities at IEEE 802.11 wireless LAN system. To solve this limit, IEEE 802.11e standard that can provide differentiated service to each traffic is under preparation. In this study, we implemented IEEE 802.11e EDCA channel access scheme with NS-2 simulator, and showed its numerical results in various system environments with using average delay and throughput as performance measures.