• Journal of the Korean Chemical Society
• /
• v.30 no.5
• /
• pp.456-464
• /
• 1986

The complex formation of branched poly(ethylene imine) (BPEI) with bivalent transition metal ions, such as Fe(II), Co(II), Ni(II) and Cu(II), have been investigated in terms of visible absorption and pH titration methods in an aqueous solution in 0.1M KCl at 30${\circ}$. The stability constants for M(II)-BPEI complexes was calculated with the modified Bjerrum method. The formation curves of M(II)-BPEI complexes showed that Fe(II), Co(II), Ni(II) and Cu(II) ions formed coordination compounds with four, two, two, and two ethylene imine group, respectively. In the case of Cu(II)-BPEI complex at pH 3.4 ∼ 3.8, ${\lambda}_{max}$ was shifted to the red region with a decrease in the acidity. The overall stability constants (log $K_2$) increased as the following order, Co(II) < Cu(II) < Ni(II) < Fe(II).

• Analytical Science and Technology
• /
• v.11 no.4
• /
• pp.248-253
• /
• 1998

The adsorption and separation behaviors of alkali, alkaline earth and transition metal ions using a poly-dibenzo-18-crown-6 were investigated in aqueous solution. The adsorption degree(E) and distribution ratio(D) of alkali, alkaline earth metal ions were Li(I)$t_R$) of metal ions were affected by the adsorption degree(E) and distribution ratio(D). This results showed good separation efficiency of K(I), Sr(II), Ag(I) and Pb(II) from the mixed metal solution.

• Economic and Environmental Geology
• /
• v.39 no.2 s.177
• /
• pp.103-109
• /
• 2006

Batch adsorption experiments were performed to adsorb cadmium [Cd(II)], copper [Cu(II)], and lead [Pb(II)] onto sphagnum peat moss. According to the results, 10-50 mg/L of Cd(II), Cu(II), and Pb(II) were effectively adsorbed and removed within 1 h by 1.0 g/L of sphagnum peat moss. The amounts of Cd(II), Cu(II), and Pb(II) adsorbed on sphagnum peat moss increased with increasing the initial concentrations. The kinetics for the adsorption of Cd(II), Cu(II), and Pb(II) on sphagnum peat moss was described well using the pseudo-second order model at different initial concentrations. The maximum adsorption capacities calculated from the Langmuir isotherm for Cd(II), Cu(II), and Pb(III) were 33.90, 29.15, and 91.74 mg/g, respectively. Experimental results showed that sphagnum peat moss was a very effective adsorbent on the adsorption of Cd(II), Cu(II), and Pb(II).

• Analytical Science and Technology
• /
• v.8 no.3
• /
• pp.299-304
• /
• 1995

The adsorption behaviors of Ba(II), Cr(II), Fe(II) and Cu(II) on the N, N'-bispalmtoyl 1, 12-diaza-3, 4:9, 10-dibenzo-5, 8-cyclopentadecane (hexadecyl $NtnOenH_4$)-octadecylsilanized silicas(ODS) were investigated with water as the mobile phase. Binding constants for metal ions were measured in aqueous solution. The order of binding constants(K) and the degree of sorption(E) were Ba(II)$NtnOenH_4$-octadecyisiianized silicas(ODS) increased with concentration of metal ions, and the degree of adsorption was found to be affected by the cation-chelation mechanism. The experimental results showed good efficiency for separation of Cu(II) from mixtures of Ba(II), Cr(II), Fe(II) and Cu(II) in aqueous solution.

• Journal of environmental and Sanitary engineering
• /
• v.12 no.1
• /
• pp.97-100
• /
• 1997

The adsorption of the Chchory particles on Cu(II), Pb(II) and Cd(II) ions were examined by measurements of the adsorption percentage under various condition of temperature, pH, times, heavy metal concentration. Each of 100ml sample solution of Cu(II), Pb(II) and Cd(II) ions mixed with 2g of the Cichory under stirring in shaking water bath for minutes. The solutions were then filtered and pretreatmented according to water pollution official test methods. The concentrations of Cu(II), Pb(II) and Cd(II) ions in the solution were determined by the atomic adsorption spectrophotometer. As a results, the most effective pH of the adsorption of Cu(II), Pb(II) and Cd(II) was 9. With increasing the concentration of heavy metals the amount of adsorption on Cichory was increased. The adsorption equilibrium of Pb(II) and Cd(II) ions were reached to equilibrium by shaking for about 40 minutes. The absorptivities were 85%, 75% respectively.

• Journal of the Korean Chemical Society
• /
• v.23 no.1
• /
• pp.1-6
• /
• 1979

The dipole moments for square planar and tetrahedral $[M(II)N_2S_2]$ type complexes are calculated, using the expansion method for spherical harmonics [M(II) = Co(II), Ni(II), Cu(II) or Zn(II)]. The calculated values of the dipole moments for these complexes are in the range of the experimental values. The possible structures for these complexes in benzene solution are discussed on the basis of the calculated dipole moments and the the magnetic properties.

• Resources Recycling
• /
• v.29 no.5
• /
• pp.73-80
• /
• 2020

In order to develop a process for the recovery of valuable metals from spent LiBs, solvent extraction experiments were performed to separate Cu(II) and/or Co(II) from synthetic hydrochloric acid solutions containing Li(I), Mn(II), and Ni(II). Commercial amines (Alamine 336 and Aliquat 336) were employed and the extraction behavior of the metals was investigated as a function of the concentration of HCl and extractants. The results indicate that HCl concentration affected remarkably the extraction efficiency of the metals. Only Cu(II) was selectively at 1 M HCl concentration, while both Co(II) and Cu(II) was extracted by the amines when HCl concentration was higher than 5 M, leaving the other metal ions in the raffinate. Therefore, it was possible to selectively extract either Cu(II) or Co(II)/Cu(II) by adjusting the HCl concentration.

• Analytical Science and Technology
• /
• v.12 no.2
• /
• pp.159-165
• /
• 1999

The adsorption and separation behaviors of transition metal ions using a merrifield resin bound 1,12-diaza-3,4:9,10-dibenzo-5,8-dioxacyclopentadecane (NTOE) and 1,12,15-triaza-3,4:9,10-dibenzo-5,8-dioxacycloheptadecane(NDOE) were investigated in aqueous solution. The orders of adsorption degree(E) and distribution ratio(D) of transition metal ions were Cu(II)$t_R$) of metal ions were affected by adsorption degree(E) and distribution ratio(D). This results showed good separation efficiency of Ag(I) from mixed metal solution.

• Analytical Science and Technology
• /
• v.10 no.4
• /
• pp.246-255
• /
• 1997

A series of Ni(II) complexes with multidentate N, O-Schiff base ligands: ie [bis-(salicylaldehyde) ethylenediamine(SED), bis-(salicylaldehyde) propylenediamine(SPD), bis-(salicylaldehyde) dietrylenetriamine(SDT), and bis-(salicylaldehyde) triethylenetetraamine(STT)] and Ni(II) complexes were synthesized. The Ni(II) complexes were characterized by elemental analysis, IR, UV-Vis and mass spectrometry. The stability constants of each nickel (II) complexes were determined by potentiometry in 70% dioxane-30% $H_2O$ and ethanol. The stability constants of Nickel(II) complexs increased in the order of Ni(II)-SPD

• Journal of the Korean Applied Science and Technology
• /
• v.9 no.2
• /
• pp.165-174
• /
• 1992

The standardized activated sludge for the biodegradation test of anion surfactants has been produced from the collected microorganisms in the soil and the wastewaters treatment plant. The activated sludge was kept under control of the pH, dissolved oxygen, microorganisms and inoculated the basal medium flasks with LAS and LAS mixed with heavy metals [Cd(II), Cu(II), Zn(II)]. Based of results, the inhibition effect(%) of heavy metals in LAS biodegradation were 1. All 1% when LAS 30mg/l-Cd(II), Cu(II) and Zn(II) 0.1mg/l, respectively 2. All 1${\sim}$10% when LAS 30mg/l-Cd(II), Cu(II) and Zn(II) 1mg/l, respectively 3. All 10${\sim}$40% when LAS 30mg/l-Cd(II), Cu(II) and Zn(II) 10mg/l, respectively 4. All 30${\sim}$65% when LAS 30mg/l-Cd(II), Cu(II) and Zn(II) 100mg/l, respectively And toxicity order of heavy metals to the microorganisms in LAS biodegradation were Cd>Cu>Zn in low concentration(0.1${\sim}$1mg/l)and Cd>Zn>Cu in high concentration(10${\sim}$100mg/l).