• 디지털융복합연구
• /
• 제11권8호
• /
• pp.191-197
• /
• 2013

본 논문에서는 광학식 기법을 이용한 적외선 센서(IR Sensor)를 이용하여 지폐 계수기에서 지폐가 32채널 IR Sensor를 지났을 때 빛에 대한 반사량과 투과량을 측정하여 진폐와 위폐를 구분하는 방법을 구현하였다. 진 위폐를 감별하기 위하여 10bit gray scale의 지폐 IR 이미지를 사용하였으며, 지폐이미지 정보는 0부터 4095까지이다. IR 이미지의 특징은 어두운 부분과 밝은 부분으로 나뉘며, 위폐는 이러한 IR 특징이 진폐와 다르게 나타난다. 적외선 센서는 비교적 고가이었으나 최근 대량생산으로 가격이 저렴해져 이 분야에 적용이 적합하다. 제안된 방법에서는 IR 특징을 정의한 SW의 Table과 입력된 IR 이미지의 특징을 비교하여 진폐 및 위폐를 감별하는 방법을 사용하였다. 결과적으로 구현된 시스템의 성능은 유로화 진폐의 경우 권종에 따라 1-2%의 오인식 경우가 있으나, 여러 나라의 위폐의 경우 100% 검출하여 구현 성능이 양호함을 보였다.

• 융합보안논문지
• /
• 제6권3호
• /
• pp.79-86
• /
• 2006

본 논문에서는 광기전력 효과를 이용한 적외선 센서(SHARP사의 GP2D12)모듈의 거리에 따른 센서의 감도와 물체와 센서가 이루는 각도의 변화에 대한 센서의 감도를 측정하여 측정된 센서값을 블루투스를 이용해서 근거리에 있는 PC로 전송하고 전송된 값을 프로그램에 의하여 분석하였다. 분석한 결과 적외선 센서의 특성을 프로세서에서 바로 측정하였을 때와 측정된 값을 블루투스 통신을 이용하여 전송하였을 때 비교 값에 차이를 나타내지 않았다. 따라서 블루투스를 이용하여 100m이내의 근거리에 있는 물체를 적외선 센서로 측정 할 수 있음을 알 수 있었다.

• 항공우주산업기술동향
• /
• 제6권1호
• /
• pp.124-134
• /
• 2008

The rising demand for the high efficiency and high covertness in UAV motivates the miniature design of the high performing mission sensors, or payloads. One of the promising payload sensors, EO/IR sensor has evolved satisfying its demands and became the main stand-alone mission sensor for 200kg-range UAV. One aspect in development of EO/IR sensor concerns lack of specification criterions to represent its performance. Even though the high demand and competition among each manufacturer caused EO/IR features subject to rapid change collateral to new technology, the datasheets maintained the conventional outdated formats which leave some of the major components in ambiguity. Making comparisons or predicting actual performance with such datasheets is hardly worthwhile; yet, they could be important reference guide for the potential customers what to expect for the upcoming EO/IR. According to UAS Roadmap 2007-2032 published by DoD, one of the main potential customers as well as a main investor of EO/IR technology, EO/IR is expected to play key roll in solving urgent problems, such as see and avoid system. This paper will examine the recent representative EO/IR specialized in UAS missions through datasheets to find out current trend and eventually extrapolate the possible future trend.

• 제어로봇시스템학회논문지
• /
• 제21권11호
• /
• pp.1017-1026
• /
• 2015

Infrared (IR) target detection is one of the key technologies in Automatic Target Detection/Recognition (ATD/R) for military applications. However, IR sensors have limitations due to the weather sensitivity and atmospheric effects. In recent years, sensor information fusion study is an active research topic to overcome these limitations. SAR sensor is adopted to sensor fusion, because SAR is robust to various weather conditions. In this paper, a Boolean Map Visual Theory-Morphology (BMVT-M) method is proposed to detect targets in SAR and IR images. Moreover, we suggest the IR and SAR image registration and decision level fusion algorithm. The experimental results using OKTAL-SE synthetic images validate the feasibility of sensor fusion-based target detection.

• Transactions on Electrical and Electronic Materials
• /
• 제18권6호
• /
• pp.341-344
• /
• 2017

Infrared (IR) filters were developed to implement integrated three-dimensional (3D) image sensors that are capable of obtaining both color image and depth information at the same time. The combination of light filters applicable to the 3D image sensor is composed of a modified IR cut filter mounted on the objective lens module and on-chip filters such as IR pass filters and color filters. The IR cut filters were fabricated by inorganic $SiO_2/TiO_2$ multilayered thin-film deposition using RF magnetron sputtering. On-chip IR pass filters were synthetized by dissolving various pigments and dyes in organic solvents and by subsequent patterning with photolithography. The fabrication process of the filters is fairly compatible with the complementary metal oxide semiconductor (CMOS) process. Thus, the IR cut filter and IR pass filter combined with conventional color filters are considered successfully applicable to 3D image sensors.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2007년도 춘계학술대회 학술발표 논문집 제17권 제1호
• /
• pp.15-18
• /
• 2007

이 논문에서는 Encoder, Gyro, 다수의 IR센서를 이용한 실내용 이동로봇의 자기위치 추정에 관한 방법 중 첫 번째 실험으로 다수의 IR센서로부터 획득한 거리데이터를 이용하여 작성한 환경지도에서 모서리를 검출하고, 이를 바탕으로 각 센서에서 측정된 데이터를 병합하도록 하였다. 마지막으로 얻어진 환경지도와 실제 환경을 비교하여 그 성능을 평가하였다.

• 센서학회지
• /
• 제29권5호
• /
• pp.303-311
• /
• 2020

Nondispersive infrared CO₂ gas sensor was developed after the simulation of optical cavity structure and assembling the optical components: IR source, concave reflectors, Fresnel lens, a hollow disk, and IR detectors. By placing a hollow disk in front of reference IR detector, the output voltages are almost constant value, near to 70.2 mV. The absorbance of IR light, F_a, shows the second order of polynomial according to ambient temperatures at 1,500 ppm. The differential output voltages and the absorbance of IR light give a higher accuracy in estimations of CO₂ concentrations with less than ± 1.5 % errors. After implementing the parameters that are dependent upon the ambient temperatures in microcontroller unit (MCU), the measured CO₂ concentrations show high accuracies (less than ± 1.0 %) from 281 K to 308 K and the time constant of developed sensor is about 58 sec at 301 K. Even though the estimation errors are relatively high at low concentration, the developed sensor is competitive to the commercial product with a high accuracy and the stability.

• 설비공학논문집
• /
• 제24권2호
• /
• pp.174-182
• /
• 2012

In previous research, most occupant said that they have not operated ventilation system installed in the house, because of increasing of energy consumption and unconcern of ventilation. Therefore, it is necessary to applied the sensor based demand controlled ventilation for the IAQ(Indoor Air Quality) and improvement of energy efficiency in ventilation strategy. The propose of this study is to present a application method of IR(Infrared) sensor for multi-zone DCV(Demand Controlled Ventilation) in the apartment house. It is possible that IR sensor could be used for DCV, because that could detect the occupant and action. IR sensor based DCV strategies are established to evaluate characteristic of application in the apartment house and simulated by Contam program. As a result, they have some week points though, if they would be applied DCV with optimum strategy, it would be useful to improve IAQ, to reduce energy consumption.

• 한국지능시스템학회논문지
• /
• 제17권6호
• /
• pp.744-748
• /
• 2007

이 논문에서는 다수의 IR 거리센서를 이용한 실내용 이동로봇의 자기위치 추정에 관한 새로운 방법을 제안한다. 각각의 IR 거리센서로부터 획득한 거리데이터를 이용하여 장애물과 벽면의 모서리를 검출한다. 각 센서에서 측정된 데이터를 병합하여 환경지도를 작성한다. 실험을 통하여 얻어진 환경지도와 실제 환경을 비교하고 그 성능을 평가하였다.

• 센서학회지
• /
• 제30권1호
• /
• pp.36-41
• /
• 2021

The motivation of this paper is to easily analyze the properties of nondispersive infrared gas sensor that has more than two different optical path length and to suggest the criterion and definition of infrared light absorbance in order to minimize the measurement errors. With the output voltage ratios and the normalized derivatives of infrared ray (IR) absorbance, when the normalized derivatives of IR absorbance decreases from 0.28 to 0.10, the lower and higher limits of errors were decreased from -5.62% and 2.39% to -4.27% and 2.78%. When the normalized derivatives of IR absorbance were 0.10, the output voltage could be partitioned into two regions with one exponential equation and the temperature compensation error was less than 5%.