• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.3
• /
• pp.25-33
• /
• 2007

In this paper, I propose a method which can enhance the visual quality of IRST images based on a loaded location in ship and an AOS. The IRST adjusts an AOS to detect targets with various altitudes because of its narrow vertical field of view and offers various functions to enhance images with its low contrast. In the proposed method, images are divided into two regions of sea and sky on the basis of the horizon after establishing relation between an AOS and a horizon location within an image. As a result, image enhancement of the proposed method is performed adaptively according to the divided region while that of conventional method is performed for entire image without the region division. Simulation results show that the proposed method represents higher visibility compared with conventional one.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.1
• /
• pp.115-121
• /
• 2014

In this paper, we propose a robust background removal integral projection(BRIP) method which can detect close surface targets in coastal environment for IRST. Row pixels of background region from coastal infrared image show similar response. Thus, the proposed BRIP is calculated after horizontal and vertical background estimations and removals are performed sequentially. Finally, surface large targets can be detected using the results of the BRIP. Experimental results on a set of real infrared image sequence show that the proposed method could fully detect ships in every frame.

• Journal of Digital Contents Society
• /
• v.19 no.6
• /
• pp.1197-1205
• /
• 2018

In this paper, we perform Single Image Super Resolution(SISR) for acquired images of EOTS or IRST from naval combat system. In order to conduct super resolution, we use Generative Adversarial Networks(GANs), which consists of a generative model to create a super-resolution image from the given low-resolution image and a discriminative model to determine whether the generated super-resolution image is qualified as a high-resolution image by adjusting various learning parameters. The learning parameters consist of a crop size of input image, the depth of sub-pixel layer, and the types of training images. Regarding evaluation method, we apply not only general image quality metrics, but feature descriptor methods. As a result, a larger crop size, a deeper sub-pixel layer, and high-resolution training images yield good performance.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.6
• /
• pp.1839-1845
• /
• 2016

Detecting remote targets is important to active protection system (APS) or infrared search and track (IRST) applications. In normal situation, the well-known constant false alarm rate (CFAR) detector works properly. However, decoys in APS or closely spaced targets in IRST degrade the detection capability by increasing background noise level in the CFAR detector. This paper presents a context aware CFAR detector by the intensity sorting and selection of background region to reduce the effect of neighboring targets that lead to incorrect estimation of background statistics. The existence of neighboring targets can be recognized by intensity sorting where neighboring targets usually show highest ranks. The proposed background statistics (mean, standard deviation) estimation method from median local pixels can be aware of the background context and reduce the effects of the neighboring targets, which increase the signal-to-clutter ratio. The experimental results on the synthetic APS sequence, real adjacent target sequence, and remote pedestrian sequence validated that the proposed method produced an enhanced detection rate with the same false alarm rate compared with the hysteresis-CFAR (H-CFAR) detection.

• Journal of Advanced Navigation Technology
• /
• v.24 no.1
• /
• pp.9-15
• /
• 2020

Recently, active electronically scanned array (AESA) radar, electro-optical and infrared (EO-IR) and infra-red search and track (IRST) sensors are under development in the Korean fighter experimental(KF-X) project, and AESA radar is currently undergoing preliminary research for flight testing. This paper focuses on the flying test bed (FTB) aircraft operation cases of developed countries in accordance with AESA radar development. As a result, we review domestic laws and regulations related to the airworthiness for FTB aircraft to operate in domestic environment and look for ways to operate FTB aircraft. Therefore, we propose how to selecting, airworthiness and operating FTB aircraft suitable for the domestic environment.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.2
• /
• pp.253-260
• /
• 2012

Target detection is very difficult with complex clutters in IRST(Infrared Search and Track) system for a long distance target. Especially sea-clutter and ocean-surface with non-uniform temperature distribution make it difficult to detect incoming targets in images obtained in sea environment. In this paper, we propose a novel method based on morphological method for estimation of ocean surface with non-uniform temperature flow. In order to estimate the exact ocean surface temperature flow, we divided it into upper and lower bound flow. And after estimating it, the final ocean surface temperature flow is derived by a mean value of the estimated results. Also, we apply the multi-weighted technique with a variety of sizes of structure elements to overcome sub-sampling effect by using morphology method. Experimental results for ocean surface images acquired from many different environments are compared with results of existing method to verify the performance of the proposed methods.

• Smart Structures and Systems
• /
• v.6 no.5_6
• /
• pp.595-618
• /
• 2010

This paper describes the application of a wireless sensor network to a 31 meter-tall medieval tower located in the city of Trento, Italy. The effort is motivated by preservation of the integrity of a set of frescoes decorating the room on the second floor, representing one of most important International Gothic artworks in Europe. The specific application demanded development of customized hardware and software. The wireless module selected as the core platform allows reliable wireless communication at low cost with a long service life. Sensors include accelerometers, deformation gauges, and thermometers. A multi-hop data collection protocol was applied in the software to improve the system's flexibility and scalability. The system has been operating since September 2008, and in recent months the data loss ratio was estimated as less than 0.01%. The data acquired so far are in agreement with the prediction resulting a priori from the 3-dimensional FEM. Based on these data a Bayesian updating procedure is employed to real-time estimate the probability of abnormal condition states. This first period of operation demonstrated the stability and reliability of the system, and its ability to recognize any possible occurrence of abnormal conditions that could jeopardize the integrity of the frescos.

• Korean Journal of Optics and Photonics
• /
• v.32 no.4
• /
• pp.153-162
• /
• 2021

In this article, the design of a variable F-number and triple magnification infrared optical system is described. That is a two-in-one optical system that combines an infrared search and track (IRST) system and an electro-optical tracking system (EOTS), where an afocal optical system is added to the IRST optical system designed already. The performance target is determined by analyzing system performance, and then the specification in the optical system design is calculated. This optical system contains a warm stop making it possible that one optics has two different F/# by cutting the size of aperture, and that is designed to suit this optics. The system satisfies the requirement such as a modulation transfer function (MTF). For operational assessment, the movement of the focusing lens group is analyzed over the change of temperature and target distance. By using this optical system, it is possible to develop equipment having two functions, infrared searching and electro-optical tracking.

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.194-196
• /
• 2002

While ultraviolet radiation alters various cutaneous cell functions, little is known about photo-immunological and photobiological effects of infrared radiation (IR) on the skin except its local thermal effects. The fIrst part of this study demonstrated that single exposure of mouse skin to near IR (0.7 - 1.3 $\mu$m) reversibly suppressed the proliferating activity of the epidermis, the density of Langerhans cells, and the ability of skin to induce contact hypersensitivity reaction. The second part demonstrated that the rate of wound closure was significantly accelerated by repeated exposures in animal models. The production of transforming growth factor-$\beta$l and matrix metalloproteinase-2, which are responsible for the wound healing processes, was significantly upregulated by irradiation, as shown by enzyme immunoassay, zymography, and reverse transcription polymerase chain reaction. Thermal controls were negative. The results suggest that near-IR irradiation can modulate the epidermal proliferation and part of the skin immune system, and stimulate the wound healing processes, presumably by non-thermal effects.

• International Journal of Automotive Technology
• /
• v.7 no.7
• /
• pp.833-839
• /
• 2006

In this paper, roll behavior of three planar half car models are compared. The first model is a simple model whose contact point between a wheel and the ground is assumed to be fixed with a revolute joint. The second model is a modified model of the fIrst model, whose wheel tread width can vary. In this model, the instant center of a wheel with respect to the ground, which is crucial to find the roll center, is assumed to be at the contact point of a wheel and the ground. The last model uses the pole of a wheel with respect to the ground for small displacement as the instant center of a wheel with respect to the ground. Loci of the center of gravity point, the fixed and the moving centrodes which are traces of roll center position in the ground and the body frame respectively, wheel contact points, and instant centers of a wheel with respect to the ground are calculated.