• Journal of the Korean Graphic Arts Communication Society
• /
• v.31 no.1
• /
• pp.1-14
• /
• 2013

Screen printing is a printing method with flexible plate surface characteristics. In addition, since the appearance of electronics industry the screen printing has been demanding high quality and definition. However, Screen printing is a method for taking ink through mesh opening because screen mesh tends to restrict quality of screen printing. In particular, the biggest problem compared with other printing type is halftone reproduction characteristics. Halftone reproduction characteristics for screen printing depend on screen mesh and opening. Dot losses or dot gains are observed through various types of screen mesh because thread of screen mesh interfere with the movement of the ink. Excessive dot losses or gains can affect the tonal range. Furthermore, this problem can result in other problem such as bad contrast and gray balance. Therefore, it is an important factor to use proper screen mesh for halftone screen printing. However, domestic screen printing industry relies on worker's experience in field rather than depending on objective data although standardized specifications and optimal printing conditions are required for screen printing. For this reason, it is important to stipulate standard condition for domestic screen printing industry. Therefore, it was examined to find tonal range by mesh opening in halftone prints process of screen printing used domestic paper and ink in this study. In addition, TVI(Tone Value Increase) characteristic was observed by comparing to the manuscripts and prints of the dot area ratio. Furthermore, contrast value and gray balance were confirmed for each condition of the printout. Conditions for the proper selection of screen mesh screen for the quality of the prints were also examined, compared with the international standard of screen printing, ISO 12647-5.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.5
• /
• pp.1-13
• /
• 2013

This study found fit optimum C, M, Y, K solid density and $CIEL^*a^*b^*$ value to paper & ink as well as check about printing machine state for color management in H-UV waterless off-set printing first. These values applied to GRACoL G7 calibration method. This method is one of color standard management method of printing. GRACoL G7 calibration method is possible stable tone reappearance by controlling gray balance by NPDC(Natural Printing Density Curve). Also, this study used values to make device profile as result that is gotten by application of GRACoL G7 calibration method. This profile was applied to CMS(Color Management System) of H-UV waterless off-set printing, and the result was possible by color management that correspond in printing quality standard of ISO 12647-2 and GRACol 2006 specifications.

• Proceedings of the Korean Printing Society Conference
• /
• 2007.11a
• /
• pp.13-28
• /
• 2007

Producing printing plate is essential progress to do offset printing. In this Film-less period, the more PS plate becomes extinct, the more the age of the Plate-Making of Exposure declines the place to stand. To do offset printing, the CTP (Computer to Plate) is taking a place of PS plate that covers speed, quality and economical problems. The biggest advantage of using CTP is that laser directly goes to the plate, thus there are no dust from the Plate-Making of Exposure. It is also theoretically able to print 200lpi${\sim}$300lpi as well as print 1751pi, because it has over 2400dpi resolution. The high quality printing could be available inside of the country, if printing machine keeps the optimum condition in offset printing. The CTP has many advantages, however there is a difficulty for the operators to preserve the equipment. The actual circumstance is that they cannot make a decision about how many dots need to be generated, and also it is necessary to know how to establish the setup at RIP on CTP to make the optimum condition output. If offset printing machine keeps the optimum condition, it would be able to print up to high quality printing however it is hard to comment what is the optimum condition for the printing machine. Anyone could say easy subjectively that machine is in the optimum condition, however it is objectively hard to estimate by number. In this research GATF / Plate Test target used to analyze the image and to make numerical value of the optimum condition of the CTP. It also used GATF / The sheep fed test printing 5.0 to know the density of the color representation, dot gain and gray balance for the optimum condition of the print machine. The purpose of this research is to represent the ISO 12647-2 which is the international standard with domestic printing equipments.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.2
• /
• pp.69-84
• /
• 2007

Producing printing plate is essential progress to do offset printing. In this Film-less period, the more PS plate becomes extinct, the more the age of the Plate-Making of Exposure declines the place to stand. To do offset printing, the CTP (Computer to Plate) is taking a place of PS plate that covers speed, quality and economical problems. The biggest advantage of using CTP is that laser directly goes to the plate, thus there are no dust from the Plate-Making of Exposure. It is also theoretically able to print $200lpi{\sim}300lpi$ as well as print 1751pi, because it has over 2400dpi resolution. The high quality printing could be available inside of the country, if printing machine keeps the optimum condition in offset printing. The CTP has many advantages, however there is a difficulty for the operators to preserve the equipment. The actual circumstance is that they cannot make a decision about how many dots need to be generated, and also it is necessary to know how to establish the setup at RIP on CTP to make the optimum condition output. If offset printing machine keeps the optimum condition, it would be able to print up to high quality printing however it is hard to comment what is the optimum condition for the printing machine. Anyone could say easy subjectively that machine is in the optimum condition, however it is objectively hard to estimate by number. In this research GATF / Plate Test target used to analyze the image and to make numerical value of the optimum condition of the CTP. It also used GATF / The sheep fed test printing 5.0 to know the density of the color representation, dot gain and gray balance for the optimum condition of the print machine. The purpose of this research is to represent the ISO 12647-2 which is the international standard with domestic printing equipments.