• International Journal of Naval Architecture and Ocean Engineering
• /
• v.8 no.2
• /
• pp.169-176
• /
• 2016

In this paper, further research is carried out to investigate the resistance encountered by an icebreaking vessel travelling through level ice and channel ice at low speed range. The present paper focuses on experimental and calculated ice resistances by some empirical formulas in both level ice and channel ice. In order to achieve the research, extra model tests have been done in an ice basin. Based on the measurements from model test, it is found that there exists a relationship between ice resistance, minimum ice load, maximum ice load and the standard deviation of ice load for head on operation in level ice. In addition, both level ice resistance and channel ice resistance are calculated and compared with model test results.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.1
• /
• pp.1-8
• /
• 2012

To correctly estimate ice load and ice resistance for a ship's hull, it is essential to understand the material properties of sea ice during ice field trials and to use the proper experimental procedure for gathering ice strength data. The first Korean-made icebreaking research vessel (IBRV), ARAON, had her second sea ice trial in the Arctic Ocean during July and August of 2010. This paper describes the test procedures used to properly obtain sea ice strength data, which provides the basic information on the ship's performance in an ice-covered sea and can be used to estimate the correct ice load and ice resistance on the IBRV ARAON. The data gathered from three sea ice field trials during the Arctic voyage of the ARAON includes the ice compressive strength, flexural strength, and failure strain of sea ice. This paper analyzes the gathered sea ice data in comparison with data from the first voyage of the ARAON during her Antarctic Sea ice trial in January 2010.

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.3
• /
• pp.254-258
• /
• 2014

Field trial in ice-covered sea is one of the most important tasks in the design of icebreaking ships. To correctly estimate ice load and ice resistance on ship's hull, It is essential to understand the material properties of sea ice during ice field trials and to perform the proper experimental procedure by gathering sea ice data. A measurement of sea ice properties was conducted during February and March of 2012 with the Korean Icebreaking research vessel "ARAON" in the Amundsen Sea, Antarctica. This paper describes a test procedure to obtain sea ice data which provide basic information to estimate ice loads and icebreaking performance of the ship. The data gathered from sea ice field trials during the 2012 Antarctic voyage of the ARAON includes ice temperature/salinity/density and the compressive/flexural strength of sea ice. This paper analyses the gathered Antarctic sea ice material properties comparing with the previous data obtained during ARAON's Arctic and Antarctic voyages in 2010.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.3
• /
• pp.254-259
• /
• 2011

The first Korean-made icebreaking research vessel "ARAON" had her second sea ice trial in the Arctic Ocean in Aug. 2010 after her first voyage to Antarctic Ocean in Jan. 2010 to gather various material and strength characteristics of sea ice. This is a detail report of ARAON 2010 summer Arctic voyage and this paper describes a standard test procedure to obtain proper sea ice data which provide basic information to estimate ice loads and icebreaking performance of the ship. The data gathered from sea ice in the Chukchi Sea and Beaufort Sea during the Arctic voyage of the ARAON includes ice temperature/salinity and the compressive/flexural strength of sea ice. This paper analyses the gathered sea ice data in comparison with data from the first voyage of the ARAON during her Antarctic Sea ice trial.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.1
• /
• pp.28-33
• /
• 2014

The Korean icebreaking research vessel "Araon" performed four sea trials in the Arctic and Antarctic Seas. The ice properties, such as the ice thickness, floe size, ice strength, and power of the vessel were quite different in these trials. To compare the speeds of ship with the same ice strength and power, the AARC (Arker Arctic Research Center) method is used with a vessel power of 10 MW and an ice strength of 630 Pa in this paper. Based on the analysis results, the speed of the ship was 1.62 knots (0.83 m/s) with a 1.02-m ice thickness and 2.5-km floe size, 5.3 knots (2.73 m/s) with a 1.2-m ice thickness and 1.0-km floe size, and 13.8 knots (7.10 m/s) with a 1.1-m ice thickness and 200-m floe size. The analysis results showed that the ship speed and floe size have an inversely proportional relationship. Two reasonable reasons are given in this paper for the final result. One is an ice breaking phenomenon, and the other is the effect of the ice floe mass. For the breaking phenomenon, the ice breaking force is very small because the ice floe is not breaking but tearing when a ship is passing through a small ice floe. Regarding the effect of the ice floe mass, it is impossible for a ship to push and tear an ice floe if the mass of the ice floe is too large compared to the mass of the ship. The velocity of the ship decreases when the ice floe has a large mass and a large size because the ship has to break the ice floe to move forward.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.3
• /
• pp.469-475
• /
• 2010

The operation scenarios, types of ice, draft and propulsion system are important design point on the beginning stage of the ice breaking vessel. The concept of hull form in ice breaking vessel has to compromise the performance according to the operation route especially if ship is operating in ice and ice free water. The several hull forms were proposed to optimize the capability of the vessel in this paper. The effect of hull form according to type of ice is also discussing and explaining the ice resistance in each ice type as like pack ice, brash ice, level ice, rubble ice and ice ridge. The draft effect was examined and propulsion system for example FPP(Fixed pitch propeller), CPP(Controllable pitch propeller) and POD system was compared focusing on the propulsion efficiency.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.2
• /
• pp.55-61
• /
• 2011

A field trial in an ice-covered sea is one of the most important tasks in the design of icebreaking ships and offshore structures. To correctly estimate the ice load and ice resistance of a ship's hull, it is essential to understand the material properties of sea ice during ice field trials and to use the proper experimental procedure for gathering effective ice data. The first Korean-made icebreaking research vessel, "ARAON," had her second sea ice trial in the Arctic Ocean during the summer season of 2010. This paper describes the test procedures used to obtain proper sea ice data, which provides the basic information for the ship's performance in an ice-covered sea and is used to estimate the correct ice load and ice resistance of the IBRV ARAON. The data gathered from the sea ice in the Chukchi Sea and Beaufort Sea during the Arctic voyage of the ARAON includes the temperature, density, and salinity of the sea ice, which was believed to be from two-year old ice floes. This paper analyses the gathered sea ice data in comparison with data from the first voyage of the ARAON during her Antarctic Sea ice trial.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.3
• /
• pp.385-392
• /
• 2018

This paper presents 2D numerical modeling to calculate ship-ice interactions that occur when an icebreaker advances into ice-covered water. The numerical model calculates repeated icebreaking of an ice plate and removal of small ice floes. The icebreaking of the ice plate is calculated using a ship-ice contact detection technique and fluid-structural interaction of ice plate bending behavior. The ship-ice interactions in small ice floes are calculated using a physically based modeling with 3DOF rigid body equations. The ice plate is broken in crushing, bending, and splitting mode. The ice floes drift by wind or current and by the force induced by the ship-ice interaction. The time history of ice force and ice floe distribution when an icebreaker advances into the ice-covered water are obtained numerically. Numerical results demonstrate that the time history of ice force and distribution of ice floes (ice channel width) depend on the ice floe size, ship motion and ice drifting by wind or current. It is shown that the numerical model of ship maneuvering in realistic ice conditions is necessary to obtain precise information about the ship in ice-covered water. The proposed numerical model can be useful to provide data of a ship operating in ice-covered water.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.1
• /
• pp.60-68
• /
• 2018

A series of tests in an ice tank was carried out using a model-scale ship to investigate the ice loading process. The ship model Uikku was mounted on a rigid carriage and towed through a level ice field in the ice tank of the Marine Technology Group at Aalto University. The carriage speed and ice thickness were varied. In this paper, ice loading process was described and the corresponding ice forces on the horizontal plane were analysed. A new method is proposed to decompose different ice force components from the total ice forces measured in the model tests. This analysis method is beneficial to understanding contributions of each force component and modelling of ice loading on hulls. The analysed experimental results could be used for comparison with further numerical simulations.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.1
• /
• pp.422-434
• /
• 2019

Several model-scale tests with a ship model have been performed in the ice tank of the Marine Technology Group in the Aalto University. The ship model of ice going tanker Uikku was mounted rigidly to the main carriage and towed through ice fields. The model tests were performed by changing ice thickness, drift angles and speeds in different ice fields. This paper reports the testing results and different phenomenon during model tests. The measured ice forces are presented and compared to level ice forces. The process of ice forces from broken ice on the ship is also analyzed for some typical tests. The research work could provide guidance on marine structures operating in waters covered by broken ice.