• Journal of the Korean Graphic Arts Communication Society
• /
• v.22 no.2
• /
• pp.163-178
• /
• 2004

In this study, the CIE RGB color space which was one of the most popular device-dependent application program in digital image processing was adopted to make the profile with the device information. The profile was applied to the digital image of a JPEG file format. The result was compared with the color reproduction of another digital image of a JPEG file format, which was made in the e-sRGB color space that had the color spaces allocated to each reproduced color of an image and device-independent colors. In this way it was investigated which color space was more appropriate for digital image processing for web printing and if the e-sRGB color space was good as a color management tool that didn't depend on a device in processing a digital image for web printing.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.04a
• /
• pp.43-46
• /
• 2014

CMOS 이미지 센서는 모바일 디바이스, 특히 스마트 폰에 내장된 카메라에 가장 광범위하게 사용된다. 이러한 이미지 센서의 정상 동작을 검사하기 위해서는 불량화소 검출과 같은 테스트가 수행되어야 하며, 테스트를 위해서는 센서에 의해서 캡처된 이미지를 대상으로 이미지 처리를 할 수 있는 함수제공이 필수적이다. 이 논문에서는 CMOS 이미지 센서의 동작을 효율적이고 엄격하게 판단할 수 있는 자동 검사 시스템을 구축하고 이미지 센서로부터 캡처되는 이미지 데이터에 대해서 목적에 맞는 테스트를 수행 할 수 있도록 이미지 처리 함수를 구현하고 실험하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.10
• /
• pp.78-88
• /
• 1995

For producing iron or steel products with good quality, the concentration of the material components should be analyzed quickly with high relability using XRF(Fluorescent X-Ray Spectrometer). Since the analysis results are much dependent upon the surface con- dition, the samples have to be prepared to have good test condition. This study presents an image processing system for inspecting the surface condition of the iron test sample. In order to use thd computer vision system, we need to develop a lighting device and image processing algorithm. For the adequate lighting device of inspection system, the indirect lighting device is contrived to cut the external light and provide uniform, stable and cold light. The image processing algorithm is aimed to reduce inspection time and to get similar analyzing results to those of the experienced operators. At first, the image processing algorithm checks whether the surface of the iron sample is ground well or not. Then, the defects; hole or dig are conted and surface condition is evaluated. In addition, the algorithm gives the reliability of the analyzing results in order to help operator's decision.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.2
• /
• pp.112-119
• /
• 2011

This paper is concerned with the measurement of static and dynamic displacement by image processing(IP) and study for prediction method of velocity and acceleration. To measure the displacement visually, the measurement system consists of a telephoto zoom camera, CCD(charge coupled device) image device and a computer. The specific target on the white board is used to calculate the displacement of the structure. The captured image is then converted into a pixel-based data and then analyzed numerically. The limitation of the system depends on the image capturing speed and the pixel-size of image. In this paper, we developed for the displacement measurement using the image processing method. The proposed method enables us to measure the vibration displacement, velocity and acceleration directly without any contact. The current resolution for the displacement measurement can be seen from the results.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.2
• /
• pp.25-31
• /
• 2009

The image processing methods are widely used in many industrial fields to detect defections in inspection devices. In this study an image processing method was conducted for the detection of abnormal pixels in a OLED(Organic Light Emitting Diode) type panel which is used for small size displays. The display quality of an OLED device is dependent on the pixel formation quality. So, among the so many pixels, to find out the faulty pixels is very important task in manufacturing processing or inspection division. We used a line scanning type BW(Black & White) camera which has very high resolution characteristics to acquire an image of display pixel patterns. And the various faulty cases in pixel abnormal patterns are considered to detect abnormal pixels. From the results of the research, the normal BW pixel image could be restored to its original color pixel.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.11
• /
• pp.1-7
• /
• 2016

In this paper, we proposed real-time relative radiometric calibration processing method for SWIR(Short Wavelength Infra-Red) sensor using 'Hyper-Spectral Imager'. Until now domestic research for Hyper-Spectral Imager has been performing with foreign sensor device. So we have been studying hyper spectral sensor device to meet domestic requirement, especially military purpose. To improve detection & identify capability in 'Hyper-Spectral Imager', it is necessary to expend sensing wavelength from visual and NIR(Near Infra-Red) to SWIR. We aimed to design real-time processor for SWIR sensor which can control the sensor ROIC(Read-Out IC) and process calibrate the image. To build Hyper-Spectral sensor device, we will review the SWIR sensor and its signal processing board. And we will analyze relative radiometric calibration processing method and result. We will explain several SWIR sensors, our target sensor and its control method, steps for acquisition of reference images and processing result.

• Journal of Multimedia Information System
• /
• v.6 no.2
• /
• pp.99-106
• /
• 2019

In traditional Chinese medical (TCM) science, tongue images can be observed for medical diagnosis; however, the tongue diagnosis of TCM is influenced by the subjective factors of doctors, and the diagnosis results vary from person to person. Quantitative TCM tongue diagnosis can improve the accuracy of diagnosis and increase the application value. In this paper, digital image processing and pattern recognition technologies are employed on mobile device to classify tongue images collected in different health states. First, through grayscale integral projection processing, the trough is found to localize the tongue body. Then the tongue body image is transferred from RGB color space to HSV color space, and the average H and S values are considered as the color features. Finally, the diagnosis results are obtained according to the relationship between the color characteristics and physical symptoms.

• Journal of Ocean Engineering and Technology
• /
• v.8 no.2
• /
• pp.166-172
• /
• 1994

This paper presents an image processing method for two dimensional position measurement of a floating structure. This method is based on image processing technique using concept of window and threshold processing to track the target object. The experimental results for position measurement of the target object in two dimensional water tank demonstrate the validity of this method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.763-764
• /
• 2013

A three-dimensional image capturing device and its signal processing algorithm and apparatus are presented. Three dimensional information is one of emerging differentiators that provides consumers with more realistic and immersive experiences in user interface, game, 3D-virtual reality, and 3D display. It has the depth information of a scene together with conventional color image so that full-information of real life that human eyes experience can be captured, recorded and reproduced. 20 Mega-Hertz-switching high speed image shutter device for 3D image capturing and its application to system prototype are presented[1,2]. For 3D image capturing, the system utilizes Time-of-Flight (TOF) principle by means of 20MHz high-speed micro-optical image modulator, so called 'optical resonator'. The high speed image modulation is obtained using the electro-optic operation of the multi-layer stacked structure having diffractive mirrors and optical resonance cavity which maximizes the magnitude of optical modulation[3,4]. The optical resonator is specially designed and fabricated realizing low resistance-capacitance cell structures having small RC-time constant. The optical shutter is positioned in front of a standard high resolution CMOS image sensor and modulates the IR image reflected from the object to capture a depth image (Figure 1). Suggested novel optical resonator enables capturing of a full HD depth image with depth accuracy of mm-scale, which is the largest depth image resolution among the-state-of-the-arts, which have been limited up to VGA. The 3D camera prototype realizes color/depth concurrent sensing optical architecture to capture 14Mp color and full HD depth images, simultaneously (Figure 2,3). The resulting high definition color/depth image and its capturing device have crucial impact on 3D business eco-system in IT industry especially as 3D image sensing means in the fields of 3D camera, gesture recognition, user interface, and 3D display. This paper presents MEMS-based optical resonator design, fabrication, 3D camera system prototype and signal processing algorithms.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.6
• /
• pp.492-499
• /
• 2000

In this paper, realization techniques of the parallel processing and the parallel network system for image processing are described. The parallel image processing system is constructed by the characterization of image processing and processor. Several problems are solved to achieve effective parallel processing and processor networking with the particular properties of image processing, which are reduction of communication quantity, equalization of load and delay depreciation on communication. A parallel image input device is developed for the flexible networking of parallel image processing. An abnormal region detection algorithm which is the basic function in machine vision is applied to evaluate the constructed parallel image processing system. The performance and effectiveness of the system are confirmed by experiments.