• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.9
• /
• pp.1139-1147
• /
• 2000

This paper describes that the size of inactive zone can be directly applied to design multiblade fan/scroll system. From the experimental studies using a five hole pitot tube and smoke test, it is found that the size of inactive zone has linear relations with the mean velocity of impeller inlet and cut-off angle gives a great influences to the fan efficiency. For the practical design, a function related with geometric parameters(i.e. inner radius, cord length, cut-off clearance and cut-off angle) of fan/scroll system is suggested. By using these formulas, the size and distribution of inactive zone can be predicted without the measurements through the full domain, it can be possible to use them to know the efficiency improvement for new model designed.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.1 no.1 s.1
• /
• pp.117-125
• /
• 2001

This paper presented the analysis of stress regimes in and around inactive and active fault zones. The stress regime in the vicinity of an existing inactive fault zone is dependent on the orientation of the fault with respect to the current stress field and the contrast between the elastic properties of the faulted rock and those of the surrounding rock. In the analysis of stress regimes around an active fault zone, if the yielding stress is exceeded during loading, the localized shearing in a fault zone will result in weakness with mean stresses in the fault becoming lower than those in the surrounding rock. It can be expected that such stress gradients will induce fluid flow towards the faults zone.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.10
• /
• pp.1341-1347
• /
• 2002

In order to improve efficiency of a system with three-dimensional flow characteristics, this paper presents a new method that overcomes three-dimensional effects by using two-dimensional CFD and neural network. The method was applied to shape optimization of cut-off in a multi-blade fan/scroll system. As the entrance conditions of two-dimensional CFD, the experimental values at the positions out of the inactive zone were used. The distributions of velocity and pressure obtained by two-dimensional CFD were compared with those of three-dimensional CFD and experimental results. It was found that the distributions of velocity and pressure have qualitative similarity. The results of two-dimensional CFD were used for teaming as target values of neural network. The optimal angle and radius of cut-off were determined as 71$^{\circ}$and 0.092 times the outer diameter of impeller, respectively. It is quantified in the previous report that the optimal angle and radius of cut-off are approximately 72$^{\circ}$and 0.08 times the outer diameter of impeller, respectively.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.1
• /
• pp.225-231
• /
• 2003

In order to improve efficiency of a system with three-dimensional flow characteristics, this paper presents a new method that overcomes three-dimensional effects by using two-dimensional CFD and response surface method. The method was applied to shape optimization of cut-off in a multi-blade fan/scroll system. As the entrance conditions of two-dimensional CFD, the experimental values at the positions out of the inactive zone were used. In order to examine the validity of the two-dimensional CFD the distributions of velocity and pressure obtained by two-dimensional CFD were compared with those of three-dimensional CFD and experimental results. It was found that the distributions of velocity and pressure show qualitatively similarity. The results of two-dimensional CFD were used for constructing the objective function with design variables using response surface method. The optimal angle and radius of cut-off were determined as $72.4^{\circ}$ and 0.092 times the outer diameter of impeller, respectively. It is quantified the previous report that the optimal angle and radius of cut-off are approximately $72^{\circ}$ and 0.08 times the outer diameter of impeller, respectively.

• Economic and Environmental Geology
• /
• v.47 no.1
• /
• pp.17-27
• /
• 2014

We investigated space-time patterns of Quaternary fault activity of the Yangsan fault zone using ESR ages in the Samnam-myeon region, Ulsan, Korea. Some of fault gouge zones consist of well-defined bands which added to the older gouge band, indicative of reactivation. During addition of new bands, the older gouge band was inactive, which represents the type I faulting mode. ESR analyses of each band of the gouge zone allow us to construct history of fault movement. The entire fault gouge zones were reactivated by type III faulting mode giving us ESR ages of the lastest reactivation. ESR dates show temporal clustering into active and inactive periods analogous to historic and paleoseismic fault activities. ESR ages and dates of fault movements indicate migration of fault activities along the Yangsan Fault Zone. Segments of the Quaternary faults in the study area are branched in the south of Sangcheon site. The earliest record of activity in segmented faults is recorded from the western segment to the northern segment. Before 750~850 ka ago, the fault gouge zone from the western segment to the northern segment were active. At 750~850 ka ago, the fault gouge zone from the eastern segment to the northern segment were active. During 630~660 ka and 480~540 ka only the northern segment was active. After 340 ka ago, the fault gouge zone from the western segment to the northern segment were active again.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.19 no.2
• /
• pp.511-514
• /
• 2005

The effects of chloroform extract from Riccardia marginata on antifungal activity were investigated. The crude chloroform extract of R. marginata inhibited the growth of the Gram positive bacterium Bacillus subtilis ATCC 19659, (4 mm inhibition zone at $150\;{\mu}g/disc$) and the dermatophytic fungus Trichophyton mentagrophytes ATCC 28185, (6 mm inhibition zone at $150\;{\mu}g/disc$), and inactive to P388 murine leukaemia cells ATCC CCL 46 P388D1, ($IC_{50}\;>25,000\;{\mu}g/mL$ at $150\;{\mu}g/disc$). This crude chloroform extract of R. marginata showed strong antifungal activity against the dermatophytic fungus Trichophyton mentagrophytes.

• The Korean Journal of Malacology
• /
• v.22 no.2
• /
• pp.143-150
• /
• 2006

The gonad index, condition index, reproductive cycle and spawning of the pen shell Atrina (Servatrina) pectinata were investigated using samples from the subtidal zone of Nokdo on the Boryeong coastal waters of Korea. Samples were collected monthly by SCUBA divers for one year from January to December, 2001. A. (Servatrina) pectinata is dioecious and oviparous. The spawning season of this species occurred once a year from June to August, with the main spawning occurring between June and July when the seawater temperature was around $20^{\circ}C$. Ripe oocytes were about 60-65 ${\mu}m$ in diameter. The reproductive cycle of this species could be classified into five successive stages; early active stage (November to March), late active stage (February to May), ripe stage (April to July), partially spawned stage (June to August), and spent/inactive stage (August to October). Monthly changes in the gonad index reached a maximum (4.6) in May (ripe stage), thereafter, the GI values gradually decreased from June to August when spawning occurred continuously. Therefore, monthly changes in the GI values showed a similar pattern to the gonadal phase. The condition index (CI) of the meat part without the posterior adductor muscle reached the maximum in June (ripe and partially spawned stage) and the minimum in September (spent/inactive stage), Accordingly, monthly changes in the condition indice of the meat part without the posterior adductor muscle coincided with the gonadal phases.

• Biomedical Science Letters
• /
• v.16 no.4
• /
• pp.331-339
• /
• 2010

This study aims to evaluate the effect of Photodynamic Therapy (PDT) against methicillin-resistant Staphylococcus aureus with high-level mupirocin resistance (Hi-Mup MRSA). To examine the antimicrobial effect of photogem-mediated PDT against Hi-Mup MRSA, CFU quantifications, bacteria cell viability tests, and disk diffusion antimicrobial susceptibility tests were evaluated. In addition, one of PDT mechanisms was investigated by accumulating photogem ($10\;{\mu}g/ml$) in Hi-Mup MRSA. Photogem-mediated PDT properly inhibited the colony formation of Hi-Mup MRSA. Viable bacteria decreased greatly after a PDT application with photogem $10\;{\mu}g/ml$ at energy density $15\;J/cm^2$. The diameter of the inhibition zone around susceptible disks increased after PDT. In addition, we confirmed the accumulation of photogem in bacteria through fluorescent images. These results demonstrated that excellent photosensitization of Hi-Mup MRSA can be achieved using photogem with 630 nm LED irradiation. Thus, PDT may make survival Hi-Mup MRSA inactive.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.365-370
• /
• 2001

In order to minimize unstable flow occurred at a multiblade fan/scroll system, optimal angle and shape of cut-off was determined by using two-dimensional turbulent fluid field analyses and neural network. The results of CFD analyses were used for learning as data of input and output of neural network. After learning neural network optimization process was accomplished for design variables, the angle and the shape of cut-off, in the design domain. As a result of optimization, the optimal angle and shape were obtained as 71 and 0.092 times the outer diameter of impeller, respectively, which are very similar values to previous studies. Finally, it was verified that the fluid field is very stable for optimal angle and shape of cut-off by two-dimensional CFD analysis.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.209-210
• /
• 2006

The Bismarck Sea represent a unique region in the equatorial western Pacific where one can explore the relationship between tectonic and magmatic processes associated with back-arc opening. The sea, located north of Papua New Guinea and just south of the equator, formed during the final stages of a long, complex geological development of the Melanesian Borderland. The development resulted from the Cenozoic convergence between the Australian and Pacific- Caroline Plates and the opening of back-arc basins. At present, the Bismarck Sea straddles two oppositely facing trenches, the inactive Manus trench and the active New Britain trench, and covers two basins, the New Guinea Basin (NGB) to the west and the Manus Basin (MB) to the east. The two basins are separated by the shallow Willaumez-Manus Rise (WMR), which trends roughly from WNW to ESE. The origin of these major structural units and their relationship with the presentday zone of major seismicity along the Bismarck Sea Seismic Lineation (BSSL) remains unclear and is the main focus of our study.